Quill Diameter (In.)
2.16"
Drills to Center of Circle (in)
10"
Drilling Capacity Cast Iron (In.)
1-1/4"
Drilling Capacity Mild Steel (In.)
1-1/8"
Tapping Capacity Mild Steel (In.)
3/4"
Distance Column to Spindle (In.)
26-1/2
Quill Down Feed Rate (Number & RPM's)
No.3/ 0.005”/0.007”/0.010"
Number Of Spindle Speeds
Variable
Range of Spindle Speeds (RPM)
Low: 50 - 390, High 270 - 2000
Spindle Taper (In. x TPI)
MT-3
Spindle Travel, Manual (In.)
5"
Spindle Travel Auto (In.)
4-1/4"
Spindle Distance to Base (In.)
48.85"
Spindle Distance to Table (Max.) (In.)
32.6"
Table T-Slots, Number & Size (In.)
2 Slots for 5/8" bolts
Table Size (L x W) (In.)
16-1/2" x 18-1/2"
Base Dimensions (In.)
17.7" x 25-1/2"
Base Work Table (In.)
14-3/16" x 13"
Base Slots Number & Size (In.)
2, 5/8"
Motor (HP)
1.5HP, 230V, 3PH
Inverter Type / Power Source
2HP/115V/1PH
Overall Dimensions (L x W x H) (In.)
32-3/5" x 22-2/3" x 70-25/64"
Heavy Casted Column Prevents Failures Prolonging The Life Of The Machine
Casted Head For More Accuracy And Rigidity
Spindle Is Supported By High Quality Ball Bearings Reducing Rotational Friction While Increasing Load Support
Large Precison Ground T-slot Production Table
LED Machine Lamp Delivers Extra Light For More Precise Drilling
Spindle Guard Protects User From Flying Debris
Emergency Stop Allows For Immediate Shut Off
High Torque At All Speeds Both Forward And Reverse
Large Hand Grips Designed With The User In Mind
Speed Changes Using A Clutch System
Forward And Reverse Switch For Instant Tapping Mode
Spindle Power Down Feed System
Electronic Variable Speed