Note on Machine - See Below in Features

FEED SPECIFICATIONS: per discussion in Features Section

CNC Control

yes

Type of CNC Control

BLM VGP 3D PC Based Control

Number of Axes

13

Alpha Numeric Name of Axes

X1, Y1, Z1, 01, Y2, V1, V2, W3, W4, V4, U4, U2, U1

Type of Steel

Mild Steel

Max. Bending Diameter

76mm or 2.99 Inches

Max. radius of curvature (monitoring)

200mm or 7.87 inches

Minimum internal radius (reducible on request)

50mm or 1.968 inchs

Maximum tube clamping gap (through)

76mm or 2.99 inches

Tube Sizes:

3.0 Inches

Max. Wall thickness @

.125 Inches

Tube Size:

2.0 Inches

Max. Wall thickness @

.188 Inches

Circle Radius Limitation

Any thing that will fit in a 3.0" circle. Max. Wall thickness, the thickness will depend on shape.

Tube Lengths - Max. to Min.

2m or 78.74" and 4m or 157.48" (Note: If pushing is not required the length would be 156" Length from the first bend to machine limit.

Option

Hitch Feed

Tube Length - Additional Information

If bending a CLR smaller than 2D and pushing with the collet is needed, the length would be 78.7" from the first bend to machine limit.

Tube Length - Additional Information - 2

If pushing is not required the length would be 156" Length from first bend to machine limit.

Machine Radius Sizes:

Max. 9.84" Inside Radius (ISR)

Machine Radius Sizes: No available

Variable Radius Bending - Not Available on this machine.

Power On Hours

15825 at 40 hours per week

Machine Weight

28,600 Lbs.


FeaturesMultistack up to 3 piecesCNC PC Based ControlLCD Color ScreenFunction Keyboard with E-StopAlpha/Numeric KeyboardPedestal Control with Foot Pedal and E-StopManualsLubrication SystemElectrics: 480V/3/60AMP: 50Misc. Tooling; approximate: 34 Round, Rectangle, Square Collets, and some other tooling.FEED SPECIFICATIONS: per discussion with a knowledgable experienced BLM/Tubebending personell : to Mandrell Feed you are LIMITED TO the 156". But there is NO Limit on HITCH FEEDING - you can feed a 6' to 7" feet per stroke until you run out of material. The is also FREE BENDING without the Mandrell. The only issue is radius that are to tight will collapse the tube wall. If you wanted to bend a 20' or 240" 3" tube it will all depend on the clearances as the part moves forward. Many times manufacturers my place the tubebender on large I-Beams to increase the work envelop, by raising the tubebender up. *Enclosure - has been removed for purposes of moving and transportation - all panels are with and stored.

This machine is listed for sale by Orca Machine Tools, Inc. located in Fridley, Minnesota