SPECIFICATIONS
TRAVELS:
X-AXIS 25.39"
Y-AXIS 9.84" (+/-4.92")
Z-AXIS 62.99"
CHUCK SIZE: 10"
SWING OVER BED: 25.59"
MAX CUTTING DIAMETER: 25.59"
DISTANCE BETWEEN CENTERS: 74.33"
C-AXIS INDEXING: 360 DEGREES
BAR CAPACITY: 3.188"
SPINDLE BORE: 3.58"
SPINDLE NOSE: A2-8
SPINDLE MOTOR: 30 hp
SPINDLE SPEED: 4,200 RPM
RAPID TRAVERSE RATE - X-AXIS: 1,968 in/min.
RAPID TRAVERSE RATE - Y-AXIS: 1,575 in/min.
RAPID TRAVERSE RATE - Z-AXIS: 1,968 in/min.
SUB SPINDLE - CHUCK SIZE: 10"
SUB SPINDLE - BAR CAPACITY: 2.04"
SUB SPINDLE - SPINDLE BORE: 2.44"
SUB SPINDLE - SPINDLE NOSE: A2-6
SUB SPINDLE - SPINDLE MOTOR: 30 hp
SUB SPINDLE - SPINDLE SPEED: 5,000 RPM
SUB SPINDLE / W-AXIS TRAVEL: 53.52"
SUB SPINDLE: Yes
TURRET 2 - X-AXIS TRAVEL: 9.25"
TURRET 2 - Z-AXIS TRAVEL: 57.52"
B-AXIS SPINDLE MOTOR: 30 hp
B-AXIS MILLING SPEED: 12,000 RPM
B-AXIS SPINDLE TAPER: CAPTO C6
B-AXIS TOOL POSITIONS: 40
B-AXIS ROTATION: 240 DEGREES (-30 TO +210)
TURRET CAPACITY: 12
TURRET TYPE: BMT65
Y-AXIS: Yes
DIMENSIONS: 213.6" X 117.9" X 116.3"
WEIGHT: 35640 LBS

EQUIPPED WITH
OKUMA OSP-P300SA THINC CNC CONTROL
BIG BORE OPTION (3.58" BORE)
LNS QUICK LOAD SERVO 80 S2 AUTOMATIC MAGAZINE LOADER
- CAPACITY FROM 1/4" TO 3-1/8"
- 63" LENGTH CAPABLE
LNS BLAZE AIR U48 UNLOADER
OKUMA UNLOADER INTERFACE
LNS MH500 CUSTOM EXTENDED LENGTH CONVEYOR TO CLEAR BLAZE AIR UNLOADER
(2) 10" SMW AUTOBLOK 260MM 3-JAW CHUCKS - MAIN & SUB
PARTS CATCHER 2S MAIN SIDE
B-AXIS FULLY CONTOURING (NC-B), H1 "TURRET"
B-AXIS CAPTO C6 40 STATION ATC
(1) TOOL PROBE TOUCHSETTER "A" for 2S
(1) RENISHAW WORK PROBE RMP60 CAPTO C6
5-AXIS MACHINING KIT:
* SUPER NURBS (X+Y+Z+C+B)
* TOOL CENTER POINT CONTROL II
* TOOL POINT CENTER MANUAL FEED
* TOOL POSTURE COMMAND
MP SYSTEMS RF8 TWIN 8 GPM HIGH PRESSURE COOLANT SYSTEM
4 GB RAM
120 GB SSD HARD DRIVE
2 USB PORTS
2 ETHERNET INTERFACE PORTS
RS-232-C INTERFACE
10 MB PROGRAM CAPACITY
3DVM
5-AXIS AUTO-TUNING
COLLISION AVOIDANCE SYSTEM (CAS)
EXTENDED COMMON VARIABLES 200 SETS
LATHE TOOL INDEX FUNCTION - MULTI-EDGE
INCLUDED IN SALE:
- GOOD ASSORTMENT OF MISC. TOOL HOLDERS FOR MILLING HEAD AND TURRET (AS PICTURED, AND LIST AVAILABLE)
HOURS OF USE AS OF MAY 16, 2023:
- POWER ON TIME: 9,094 HOURS
- NC RUNNING TIME: 1,835 HOURS
- SPINDLE REVOLUTION: 1,085 HOURS
- CUTTING TIME: 1,610 HOURS
REPLACEMENT COST ON ABOVE SYSTEM IF PURCHASED NEW: OVER $700,000
*** MACHINE IS IN PLANT, UNDER POWER -- AVAILABLE IMMEDIATELY

This machine is listed for sale by Machinery Resources International located in Simi Valley, California