DECKEL UNIVERSAL HORIZONTAL/VERTICAL MILL
MODEL: FP-2, S/N: 6153
SPECIFICATIONS:
NUMBER OF SPINDLE SPEEDS .............. 18
SPINDLE SPEEDS ........................ 40 - 2000 R.P.M.
SPINDLE HORSE POWER ................... 3
RATIO BETWEEN ANY TWO CONSECUTIVE
SPINDLE SPEEDS ...................... 1.25:1
RATIO BETWEEN MINIMUM & MAXIMUM
SPEEDS ............................. 1:50
TAPER HOLE IN SPINDLE NOSE ........... STD NO. 40 TAPER
HEADSTOCK HORIZONTAL TRAVEL, POWER
OPERATED/MANUAL .................... 7.5/8" (190mm)
BEARING SLEEVE, ONE REVOLUTION OF
OF SCALE DRUM EQUALS ............... 0.5" (12.7mm)
BEARING SLEEVE, ONE SCALE DRUM
DIVISION EQUALS .................... 0.01" (.254 mm)
KNEE TABLE WORK CLAMPING AREA ........ 28-5/8" x 9-7/16"
FIXED ANGULAR TABLE CLAMPING AREA .... 28" x 13" (711x330mm)
WORKTABLE LONGITUDINAL TRAVEL ........ 15.75" (390 mm)
WORKTABLE VERTICAL TRAVEL ............ 15.75" (390 mm)
NUMBER OF FEEDS ...................... 18
FEED RATES ........................... 0.3 - 16 IN. PER MIN.
POWER RAPID TRAVERSE RATE ............ 45"/min (1,143 mm)
WORKTABLE HORIZONTAL FEEDSCREW, ONE
REVOLUTION OF SCALE DRUM EQUALS .... 0.10" (2.5 mm)
WORKTABLE ELEVATING SCREW, ONE
REVOLUTION OF SCALE DRUM EQUALS .... 0.10" (2.5 mm)
HEADSTOCK FEEDSCREW, ONE REVOLUTION
OF SCALE DRUM EQUALS ............... 0.10" (2.5 mm)
ONE SCALE DRUM DIVISION EQUALS ....... 0.001" (0.0254mm)
LxW OF MACHINE ....................... 56-5/16" x 68-1/2"
OVERALL HEIGHT OF MACHINE, EXCL.
ATTACHMENT ......................... 55-1/8"
OVERALL HEIGHT INCL. HIGH SPEED
VERTICAL SPINDLE HEAD .............. 71"
FLOOR SPACE .......................... 82-11/16" x 94-1/2" IN.
NET WEIGHT OF MACHINE INCL. ELECTRICAL
CABINET ............................ 2,425 LBS.
EQUIPPED WITH:
LARGE ANGULAR TABLE
VERTICAL HEAD
VERTICAL SLOTTING HEAD
ARBOR SUPPORT & ARBORS
MISCELLENOUS TOOLING
3 HORSE POWER SPINDLE MOTOR
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
FOR MORE INFORMATION: Call David at 973-497-7570