NEW VICTOR 20" x 60" PRECISION HIGH SPEED LATHE
MODEL: 2060S w/ Special Package *MADE IN TAIWAN*
Extra large rigid compound rest and Meehanite casting bed
provide excellent stability and consistency during
machining. Large 3-1/8" spindle bore and 10 HP main motor
are sufficient for high demanding jobs.
FEATURES:
Oversized rigid compound rest for heavy cutting
Hardened and precision ground gears and bedways
Hardened and ground spindle nose
Full Meehanite casting bed
Headstock transmission gears driven by spline shafts
The spindle is supported at 3 points by precision bearings
Safety overload device
Inch/metric threading without changing gears
10 HP main motor delivers full power at all 12 speeds
Dual speed tailstock quill (ratio 1:1 and 1:5) provides easy drilling operation
2-way longitudinal (z-axis) power rapid traverse on 20120S and 20160S
SPECIFICATIONS:
CAPACITY
Swing over bed: 20"
Swing over cross slide: 13"
Swing over gap: 26-3/8
"Bed width: 15-3/4"
Distance between centers: 60"
HEADSTOCK
Spindle bore diameter: 3.13"
Spindle bore taper: M.T. #7
Taper of center in sleeve: M.T. #5
Spindle nose: D1-8
Number of spindle speeds: 12 Steps
Range of spindle speeds (rpm): 20 ~ 1,550 rpm
Speed selections: 20, 30, 45, 60, 100, 150, 210, 350, 490, 680, 1100, 1550
THREADS & FEEDS
Range of longitudinal feeds: 0.0014" ~ 0.0387"/rev.
Range of cross feeds: 0.0007" ~ 0.01935"/rev.
Inch threads: 2 ~ 112 TPI x 60 kinds
Metric threads: 0.2 ~ 14 mm x 60 kinds
CARRIAGE
Cross slide travel:12-1/2"
Compound slide travel:10"
TAILSTOCK
Tailstock taper center:M.T. #5
Tailstock quill travel:6-5/16"
POWER
Main motor:10 HP 3 Phase
Coolant pump:1/8 HP
WEIGHT & DIMENSIONS
Shipping dimensions (LxWxH)110"x44"x65"
Gross weight: 5,320 lb.
STANDARD ACCESSORIES:
Removable gap
Tailstock with duo speed quill
Coolant system
Chuck cover with limit switch
D.P. / module thread change gears
Threading dial indicator
Center sleeve
Dead center M.T. #5
2-way longitudinal z-axis power rapid traverse (20120S and 20160S only)
Leveling screws and pads
Manual and parts list
OPTIONAL SPECIAL PACKAGE INCLUDES:
10" 3-jaw chuck
16" 4-jaw chuck
Steady rest with rollers
Follow rest
4-way tool post
Halogen work light
Full length splash guard for 2040S, 2060S and 2080S only
On-carriage splash guard for 20120S and 20160S only
FOR MORE INFORMATION: Call Terry at 973-497-7612