MACHINE FEATURES AUTOMATIC TWO PALLET CHANGER (APC), FULL "C" AXIS WITH LIVE MILLING SPINDLE, 24 ATC, TWO 63" DIAMETER CHUCKS, AND FANUC 15TA CONTROL

Table diameter--63"
Maximum swing--78.8"
Maximum height top of table to bottom of ram--53"
Maximum cutting height--45.3"
Maximum cutting diameter--78.7"
Maximum load on table--11,000 lbs.
Travels--
horizontal travel of rail head; -31.7", +44.1"
vertical travel of ram; 31.7"
vertical travel of cross rail; 19.7"
Table speeds (2 ranges)--1.6 to 280 rpm
Maximum table torque--15,900 ft-lbf
Milling spindle speeds--12.5 to 1,500 rpm
Feedrates--
X-axis 472 ipm rapid/0.1 to 78.7 feed
Z-axis 315 ipm rapid/0.1 to 78.7 feed
C-axis 800 degrees per minute rapid/11.8 degrees per minute feed
Automatic tool changer capacity (ATC)--24; 8 for turning/16 for milling
Taper in ram--no. 50
Section of ram--8.66" x 8.66"
Table drive motor--60/50 HP
Milling spindle drive motor--20/14.7 HP
Power requirement--200/220 volts; 100 kVA
Equipped with;
Automatic two pallet changer (APC)
24 tool capacity automatic tool changer (ATC)
Turning and milling tool holders
Chuck top jaws
(2) 63" diameter chucks
Coolant tank and pump
Chip conveyor
ATC tool hoist
Tool measurement presetter
Fanuc 15 TA CNC control

Condition--good; inspect under power
Weight--72,200 pounds
Floor space--313" x 288" x 220" high (rail and ram in uppermost position)

This machine is listed for sale by International Machine located in Orion Township, Michigan