buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Machining Centers - CNC > Vertical Machining Centers CNC

CNC Vertical Machining Centers For Sale

834 new & used cnc vertical machining center items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 834 matches
Sort by:
Items Per Page:  20  |  50 |  100
25.6″ X, 30.1″ Y, 20.5″ Z, Doosan VC630 5AX, 20,000 RPM, HSK Spindle, CTS,
Doosan VC630 5/Ax 5-Axis Simultaneous Vertical Machining Center Built 10/2016, 2,000 Cutting Hours Capacity: X-Axis Travel…………………….. 25.6″ Y-Axis Travel…………………….. 30.1″ Z-Axis Travel…………………….. 20.5″ Table Size (
  • X axis: 25.6"
  • Y axis: 30.1"
    30″ X, 16″ Y, 20″ Z, Fadal VMC-3016 FXMP HT, 2008, Cat-40, 10,000 RPM, 21 A
    Stock number: 67105 Fadal VMC-3016FXMP HT Vertical Machining Center New: 2008 X-Axis Travel…………………….. 30″ Y-Axis Travel…………………….. 16″ Z-Axis Travel…………………….. 20″ Table Size……………………….. 39″ x 16″ Maximum Weigh
    • X axis: 30"
    • Y axis: 16"
      41.3″X, 20.1″Y, 20.1″Z, Mazak VCN-510C, 2005, Mazatrol 640M, 12,000 RPM, 4t
      Mazak Model: VCN-510C Cnc Vertical Machining Center With 4Th Axis New: 2005 Specifications: Table Dimensions……………… 51.18″ X 21.65″ Max Table Load Capacity……….. 2640 Lbs X-Axis Travel………………… 41.34″ Y-Axis Tra
      • X axis: 41.3"
      • Y axis: 20.1"
        HAAS VF-3B YT ,  40" X, 26" Y, 25" Z, NEW: 2007
        SPECIFCATIONS: TRAVLES: --X: 40" --Y: 26" --Z: 25" HAAS TRIPLE HIGH-SPEED CNC CONTROL W/15" LCD MONITOR RS-232C PORT RIGID TAPPING CHIP AUGER 1MB PROGRAMMING MEMOR 3.5" FLOPPY DISK
        • X axis: 40"
        • Y axis: 26"
          HAAS, GR-510, 121" X, 61" Y, 11" Z, NEW: 2003
          SPECIFICATIONS: TRAVELS: --X : 121" --Y : 61" --Z : 11" TABLE SIZE: 122" x 59" BETWEEN COLUMNS: 62" RAPID TRAVERSE RATE X/ Y AXES: 800/2100 IPM RAPID TRAVERSE RATE Z AXIS: 1100 IPM
          • X axis: 121"
          • Y axis: 61"
            MAZAK VARIAXIS 500-5X 5-AXIS CNC VERTICAL MACHINING CENTER
            MAZAK VARIAXIS 500-5X 5-AXIS CNC VERTICAL MACHINING CENTER New 2005 Motor Driven with 30 Min. 20 HP Continuous Spindle Motor and Controls EQUIPPED WITH: Mazatrol 640M-5X CNC Controls, 40 Position Automatic Tool
            ROEDERS MODEL RP 800 3-AXIS HIGH SPEED VERTICAL MACHINING CENTER
            ROEDERS MODEL RP 800 3-AXIS HIGH SPEED VERTICAL MACHINING CENTER     New 2002 Motor Driven with 23 HP, 3-Phase, 60 Cycle, AC Spindle Drive EQUIPPED WITH: Roeders Rms6 CNC Controls , 80 Gig Hard Dr
            HITACHI SEIKI MODEL VA-85 3-AXIS CNC VERTICAL MACHINING CENTER
            HITACHI SEIKI MODEL VA-85 3-AXIS CNC VERTICAL MACHINING CENTER New 1986 Motor Driven with 20/25 HP Spindle Drive Motor and Controls EQUIPPED WITH: Fanuc 11M CNC Controls, 30 Position ATC, Coolant, Chip Conveyor&
            2001 Haas VF-5 CNC Vertical Machining Center
            Specifications: Control ......................................................................................................... Haas Table Size ........................................................................
            • X axis: 50"
            • Y axis: 26"
              HAAS, VF-1, 20" X, 16" Y, 20" Z, NEW: 2013
              SPECIFICATIONS: TRAVELS: --X: 20" --Y: 16" --Z: 20" RAPID RATE X AXIS: 1000 IPM RAPID RATE Y AXIS: 1000 IPM RAPID RATE Z AXIS: 1000 IPM TABLE SIZE: 26" x 14" MAX TABLE LOAD: 3,000 LB
              • X axis: 20"
              • Y axis: 16"
                HURCO, VMX24, 24" X, 20" Y, 24" Z, NEW: 2006
                SPECIFICATIONS: TRAVELS: --X: 24" --Y: 20" --Z: 24" TABLE SIZE: 30" X 20" MAX. TABLE WEIGHT: 3,000 LBS RAPID TRAVERSE (X & Y): 1378 IPM RAPID TRAVERSE Z: 1181 IPM SPINDLE SPEED:
                • X axis: 24"
                • Y axis: 20"
                  HURCO, VMX24, 24" X, 20" Y, 24" Z, NEW: 2006
                  SPECIFICATIONS: TRAVELS: --X: 24" --Y: 20" --Z: 24" TABLE SIZE: 30" X 20" MAX. TABLE WEIGHT: 3,000 LBS RAPID TRAVERSE (X & Y): 1378 IPM RAPID TRAVERSE Z: 1181 IPM SPINDLE SPEED:
                  • X axis: 24"
                  • Y axis: 20"
                    HAAS, VF-2, 30" X, 16" Y, 20" Z, NEW: 2015
                    SPECIFICATIONS: TRAVELS: --X: 30" --Y: 16" --Z: 20" TABLE SIZE / MAX TABLE LOAD: 36" X 14" / 3,000 LBS. SPINDLE NOSE TO TABLE TOP: 4" - 24" SPINDLE SPEED: 8,100 RPM SPINDLE
                    • X axis: 30"
                    • Y axis: 16"
                      HAAS, TM-3P, 40" X, 20" Y, 16" Z, NEW: 2011
                      SPECIFICATIONS: TRAVELS: --X: 40" --Y: 20" --Z: 16" MAX FEED: 200 IPM RAPID RATE: 400 IPM TABLE/WORK SUPPORT TABLE SIZE: 57.75" X 14.50" MAX. WORKPIECE WEIGHT: 1,000 LBS TAPER: CAT40
                      • X axis: 40"
                      • Y axis: 20"
                        Haas VF-2 CNC Vertical Machining Center
                        Specifications Table Size 36"x18" Max. Table Load 3,000 lbs Table Travels X-Axis 30" Y-Axis 16" Z-Axis 20" Rapid Traver
                        • X axis: 60"
                        • Y axis: 16"
                          MATSUURA MC-500V VMC
                          YASNAC MX-1, 50 BT-35 TOOL HOLDERS
                          • X axis: 20"
                          • Y axis: 14"
                            HAAS VF-3SS , 40" X, 20" Y, 25" Z NEW: 2012
                            SPECIFICATIONS: TRAVELS: --X: 40" --Y: 20" --Z: 25" TABLE SIZE: 48 x 18" MAX. TABLE LOAD (EVENLY DISTRIB.): 1750 LBS SPINDLE NOSE TO TABLE TOP: 4" - 29" RAPID TRAVERSE RATE ALL AX
                            • X axis: 40"
                            • Y axis: 20"
                              TAKISAWA MAC-V2 VMC
                              FANUC 6M, 7.5 HP, 18 ATC, 5000 RPM
                              • X axis: 22"
                              • Y axis: 16"
                                AWEA VP-2012 CNC Double Column Vertical Machining Center
                                Reference #30605 AWEA VP-2012 CNC Double Column Vertical Machining Center FEATURES: Fanuc OM CNC Flood Coolant Tooling CAPACITY: X-Axis Travel ......................... 78.7" Y-Axis Travel ............
                                • X axis: 78.7"
                                • Y axis: 47.2"
                                  HAAS VF2 VERTICAL MACHINING CENTER MFG:2015
                                  HAAS VF2 VERTICAL MACHINING CENTER MFG:2015
                                  • X axis: 30"
                                  • Y axis: 16"
                                    Categories:
                                    • X machine tools (834)
                                    • X Machining Centers - CNC (834)
                                    • X Vertical Machining Centers CNC (834)
                                    Price:
                                    •  to 
                                    1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>