CALL FOR BEST PRICING!

FEATURES:
The PR-409 single pinch hydraulic plate roll from Baileigh Industrial is a great roll former that can form 9 gauge mild steel to a 7” ring on its full length of 4’. The PR-409 is operated entirely by an industrial grade hydraulic system. A 2 hp 220 volt three phase motor controls the system which runs the movement of the back roll as well as the rolling of all three forming rolls.

Since all three rolls are driven, this cuts down on forming time that the operator has to spend on each job. The operation of the PR-409 hydraulic plate roll is all done on a convenient foot pedestal. Once the pinch is set the foot pedal contains forward and reverse pedal as well as buttons to control the up and down movement of the back roll. A digital readout is also provided to identify the position of the back roll as well. If you have projects that need to form cones, the PR-409 has an optional coning attachment available. For safety, the PR-409 has emergency stop cable on the front and back of the machine.

SPECIFICATIONS:
Forming Width: 48"
Capacity (Mild Steel): 9 ga. (.150")
Upper Roll Diameter: 4.75"
Minimum Forming Diameter: 7.125"
Roll Adjustment Back: Hydraulic
Wire Grooves: Yes
Roll Speed: 5.85 rpm
Motor: 2 hp
Power Requirement: 220V / 3-phase
Shipping Dimensions (L / W / H): 60" x 37" x 11"
Shipping Weight: 3,740 lbs

OPTIONAL ITEMS:
Coning attachment

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida