NEW DIMENSION POWER PINCH PLATE ROLLS
PRICE: Loaded on Truck, Our Warehouse, York, PA … $6,500.00 AS IS

HMC Stock # 23113-P
Machine Serial No.: 11891165
Machine Model No.: P5-125
New Date: 1989

Rated Capacity: 5' x 10 Ga. Mild Steel, Maximum with 40" Diameter Initial Pass
Roll Size Each: 5" Diameter x 62" Long
3 Roll Design, All Rolls are Power Driven
Rear Bottom Roll Adjusts for 6" of Travel

EQUIPPED WITH:
Power Rear Pinch Roll Adjustment
Electric Foot Pedal Control for Forward and Reverse Operation
Safety Stop Perimeter Cable for Work Area
All Rolls Have 3 Grooves at Right End for Rod or Narrow Strips
Lower Roll Has a Longitudinal Groove in It for Material Start Guide
Single Speed Gear Box Drive with Chains and Sprockets
Manual Roll Drop End
Fixed Pinch Rolls
1/3 HP Roll Adjustment Motor
3 HP Main Motor
All Motors Wired for 3 Phase, 60 Hz, 208-230-460 Volts
Presently Wired for 220 Volt Operation

Overall Size: 96" LR x 53" FB x 42" High

Note: The lower front roll on this machine is bent on the end of the shaft approximately .200” TIR. This causes the machine to move while in operation. Having looked at the issue it could likely be fixed but it would require the machine to be completely taken apart and put back together. The investment of time to do that is not possible with this machine. That is the reason for the machine being offered in AS IS condition.

This machine is listed for sale by Hildebrand Machinery Co Inc located in York, Pennsylvania