CNC Control

yes

Type of CNC Control

Mitsubishi M70V

Number of Axes

7

Control Axis Groups

2

Number of Spindles

2

Chuck Size

6" on main spindle

Spindle 1 Chuck Size

6"

Spindle 2 Chuck Size

5"

Max. machining length

150mm/5.9"

Diameter of standard cutting - Spindle 1

51mm Dia.

Diameter of standard cutting - Spindle 2

51mm Dia.

Spindle Speed Range

2

Spindle speed range - Spindle 1

5000 RPM

Spindle speed range - Spindle 2

5000 RPM

Inner diameter Draw tube - Spindle 1

52mm Dia.

Inner diameter of draw tube - Spindle 2

43mm Dia.

No. Positions on Turret

12 Station Turret

Revolving Number of Tools on Turret

Max. 12

Revolving Tool Speed Range

6000 RPM

Slide Stroke

See Below

Turret Slide Stroke X1 Axis

165mm

Turret Slide Stroke Z1 Axis

300mm

Turret Slide Stroke Y1 Axis

80 (+/-40)mm

Spindle Slide Stroke - X2 Axis

86mm

Spindle Slide Stroke - Z2 Axis

553mm

Spindle HP

20HP

Sub-Spindle HP

10HP

Revolving Tool Drive

5.3HP

Voltage / Power requirement

AC200/220 +/-10% 50/60 Hz

Dimensions

153.8"L x 61.45"W x 43.30" Ht (with chip conveyor)

Machine Weight

11240 Lbs.


Control: Mitsubishi M70VDisplay Color 10.4" LCDStandard AccessoriesSP1/SP2 Chucking Device H-S22Splash guard interlockSpindle Air BlowSpindle BrakeSP2 Work Ejector & Inner High Pressure CoolantPart ConveyorChip Conveyor3-Color Signal TowerTotal & Preset Counter (Custom Menu)Cut-Off Confirmation (Electric Type) Barfeeder InterfaceCoolant Level SwitchStandard Tooling PackageOptional Accessories1000 psi High Pressure Coolant - Chip BlasterMist Collector - Cool BlasterParts CarrierCut-Off Confirmation (Cylinder Type)3-Jaws Chuck SystemsStandard NC FunctionsSpindle C axis control (main-back)Spindle synchronization function (main - back)Program storage capacity: 160mUser macrosCanned cycle for drillingConstant surface speed controlPolygon turningSpindle synchronized tapping function (main-back)Tool spindle synchronized tapping functionSub-inch controlMilling interpolationHelical interpolationMultiple repetitive cycle for turning I/IIB code I/FTool offset: 80 pairsNose radius compensationHigh speed program checkOptional block skip (1 set)Superimposition of control axesTorque skip functionCorner chamfering/Corner roundingArbitrary axis exchange functionContinuous thread cuttingNetwork I/O functionOther Features:Chip ConveyorFMB turbo 5-55 Magazine Barfeed*All tooling including live toolholders go with the machine.

This machine is listed for sale by Orca Machine Tools, Inc. located in Fridley, Minnesota