73" - 121" x 16 ga TENNSMITH® Mechanical Shears
Miscellaneous - Shears & Shearing Equipment
CALL FOR BEST PRICE!
MADE IN USA
TENNSMITH'S MSE Series mechanical shears utilize a low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid performance.
The MSE Series come standard with four-edge, high carbon, high chrome blades, a self-leveling hold down bar with neoprene insert, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table, dual inch/metric inlaid bed scales and non-metallic gibs. The MSE Series also incorporates the unique front operated 2X-F back gauge system. This system allows the operator to move the backstop from 0 to 30 inches in approximately 2 seconds with only tow rotations of the handle. Capacities of the shears are 16-gauge mild steel, 22-gauge stainless with 73 or 121 cutting lengths and speeds of 40 strokes per minute.
The MSE616-R / MSE1016-R shear is standard in a "Performance Package-R" configuration. The Performance Package includes: a five foot squaring arm, a pair of front support arms, rear material return air operated sheet support system, and part counter.
The MSE616-F / MSE1016-F shear is standard in a "Performance Package-F" configuration. The Performance Package includes: a four foot squaring arm, a pair of front support arms, front material return air operated sheet support system, and part counter.
The MSE1016-FC includes all the features of the MSE1016-F, but also includes a front return material cart as standard. The material cart allows for sheared materials to be moved from the shear to other areas in the shop without restacking. Numerous options are available for the MSE Series. Please contact Sierra Victor Industries for further details.
Four-edge, high carbon, high chrome blades
Self-leveling hold down bar with neoprene insert
Single, continuous and jog stroke cycles
Motor reverse switch
Dual inch/metric inlaid bed scales
Maximum shearing capacity, Mild Steel: 16 gauge/1.6mm
Maximum shearing capacity, Stainless Steel: 20 gauge/1.0mm
Maximum cutting length
73" / 1,854mm (MSE616)
121" / 3,073mm (MSE1016)
Back gauge range: 30" / 762mm
Strokes per minute, full length: 40
Motor - 230/460V, 3-Phase, 60Hz: 3 HP
Number of hold downs: Solid BAR
Floor space, gauges in position
92" x 69" x 50" (MSE616)
140" x 69" x 50" (MSE1016)
2,300 lbs. / 1,046kg (MSE616)
4,150 lbs. / 1,886kg (MSE1016)
Single Phase Electrics
Wired for CSA Canadian Electrical Standard
Air-operated sheet support system
Front Support Arms, Pair
Squaring Arm, Five Foot with Dual Inlaid Inch/Metric Scale
Squaring Arm, Ten Foot with dual Inlaid Inch/Metric Scale
Additional Flip-up Stops for Squaring Arm (each)
Digital Readout for 2x-F Back-gauge System
Front support arms
Stroke Counter (Electro-Mechanical)
The MSE Performance Package Includes:
Air-operated sheet support system, F or R:
"F" is a Front Return Material System via material tray located under
the shear table.
"R" is a Rear Return Material System
"FC" Front Return Material System and includes a front return material cart as standard. The material cart allows for sheared materials to be moved from the shear to other areas in the shop without restacking.
Five-foot squaring arm
Pair of Front support arms
MSE616: 73" x 16 ga Shear (Base Model)
MSE616-R: 73" x 16 ga Shear with Performance Package R
MSE616-F: 73" x 16 ga Shear with Performance Package F
MSE1016-R: 121"x16ga Shear with Performance Package R
MSE1016-F: 121"x16ga Shear with Performance Package F
MSE1016-FC: 121" x 16 ga Shear with Performance Package FC
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 3 YEAR – Limited
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida