buy & sell, new & used machinery, machine tools & equipment

39 new & used miscellaneous shearing equipment items for sale
1 | 2
Refine: Viewing 1 - 20 of 39 matches
Sort by:
Items Per Page:  20  |  50 |  100
3/16"x10' Amada M-3045 Mechanical Shear
Specifications Overall cutting length 10' Maximum cutting capacity 3/16" Speed 60 SPM Back Gauge Range 0-40" Back Gauge Speed 1800 IPM Number of Holddowns 11 Overall Dimensions 14'X6'X6'
1/4" x 12' Cincinnati 1812 Mechanical Shear
Specifications Capacity 1/4" Overall Cutting Length 144" Rake Taper 1/4" Per Foot Length of Gap 18" Strokes Per Minute 60 # of Hold Downs 13 Main Motor 15HP Dimensions (approx) 160"x80&
$4,500
W.A Whitney
609-250 Ton 45 6x6x 1/2 mild steel 6x5/8 mild flat steel Has new pump and new presser valve
3/16" x 4' Amada M-1245 Mechanical Shear
Specifications Capacity 3/16" M.S. Max Cutting Length 4' Rake Angle 1 Deg @ 28" Number of Holddowns 6 Backgauge Range 36" Strokes Per Minute 75 Weight 6,000# Equipped With: Front Ope
Mechanical Shear
Mechanical Shear Manufacturer: Cincinnati Incorporated Model: 1810 Capacity: 10’ x ¼” Mild Steel Age: 1970 Electrics: 480 Volt / 3 Phase / 60 HZ Motor: 15 HP (need to confirm) Features: …Power Back Gauge: 47
Mechanical Shear
Mechanical Shear Manufacturer: Cincinnati Incorporated Model: 1810 Capacity: 10’ x ¼” Mild Steel Age: 1970 Electrics: 480 Volt / 3 Phase / 60 HZ Motor: 15 HP (need to confirm) Features: …Power Back Gauge: 47
1/4" x 6' Amada M-2060 Mechanical Shear
Specifications Max. Cutting Length 78" Capacity 1/4" Strokes per Minute 60SPM No. of Holddowns 9 Weight 10,500# Equipped With: Front Operated Back Gauge Squaring Arm [2] Support Arm Rear She
FAMCO MECHANICAL SHEAR,1472,72” x 14ga.,85 SPM, 5 H.P.,2- frnt supprt arms
USED FAMCO MECHANICAL SHEAR, MODEL 1472, YEAR: 1968, Stock No. 10499 Specifications Capacity: 14 gauge Maximum Cutting Length: 72” Rake Angle: 5/16” per foot Gap adjustment: Manual in table Strokes Per Minute: 85
1/4" x 10' Cincinnati 250 Hydraulic Shear
Specifications Overall cutting length 122" Shearing Capacity 1/4" Rake Taper at Max Rake 3/8"/Foot Strokes per Minute 32 - 70 No. of Holddowns 12 Motor Horsepower 25 Dimensions 172"x86"x
EDWARDS TRUECUT 3.25/2000 DIRECT DRIVE SHEAR, 1/8” x 80”
SPECIFICATIONS MAXIMUM CAPACITY: 1/8” LENGTH OF CUTTING BLADES: 80” SHEAR ANGLE: 1-1/2° STROKE: 50 SPM MOTOR CAPACITY: 10 HP SPEED: 1,500 RPM BACK GAUGE RANGE: 25” TABLE EXTENSION: 40” GENERAL DIMENS
Cincinnati Model 1810 Shear 1/4" x 10ft, Front Arm Support, Power Back
Cincinnati Model 1810 Shear 1/4" x 10ft, Front Arm Support, Powered BackGauge Capacity (Mild Steel): 1/4" Max. Cutting Length: 122" Between Housings: 123" Throat Depth:
1976 CINCINNATI MODEL 5FL12 HYDRAULIC SHEAR, 12' X 5/8"
SPECIFICATIONS NOMINAL CAPACITY: 5/8” X 12’ CAPACITY @ INCREASED RAKE: 3/4” X 12’ DISTANCE BETWEEN HOUSINGS: 12’3” THROAT DEPTH: 18" MOTOR: 40 HP WEIGHT: 53,000 LBS EQUIPPED WI
Hero Technology Inc. Model DS1010 shear:
Year: ? Make: Hero Model: DS1010 Condition: Good Machine Status: Can be powered up Shipping Info: We can load Weight: 1200 Dimension: L x W x H 3 x 4 x 6 Machine Location: City: On Request State: South Caro
1/8" X 6', EDWARDS, MECHANICAL SHEAR (2000)
MAX. CUTTING CAPACITY 3.5MM ( 1/8") LENGTH OF CUTTING BLADES 80" SHEAR ANGLE 1-1/2 ° STROKES / MIN. 50 SPM MOTOR CAPACITY 9.6 HP ELECTRICS 600 V/3/60 BACK GAUGE RANGE 25" APPROX. WEIGHT 4,000 LBS. Equipped With
8' X 1/4" Amada Mechanical Shear, MODEL M-2560, 1981, SN: 2560327
8' X 1/4" Amada Mechanical Shear, MODEL M-2560, 1981, SN: 2560327 General Specifications: Capacity (Thickness) 1/4" Length: 8' Strokes per Minute: 60 SPM Full Load Power: 7.9 KVA
Wysong Model 1052 Line Shear
Wysong Model 1052 Line Shear S/N: P97-100, Stock No: 17515 Capacity: 12 Ga. 52" width Air Clutch Bow Tie Blade Motor: 15 HP 230/460V 3Ph
Cincinnati Shear
This is a 3/8" shear it is fully operational and has attachment for picking up full sheets. As you can see its a used peice of equipment. This is a OBO machine it has to go. Buyer pays for moving.
National N5216 Metal Shear
National foot shears are designed for precise shearing through 16 gauge mild steel. This shear is also recommended for shearing aluminum, plastic, copper, brass and lead. All steel side frames, all steel tables and cutte
49" - 121" x 14 - 10 ga NATIONAL® Mechanical Shears
CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: These powerful Mechanical Shears are all USA made. They offer rugged welded construction, inch-bed scales, accurate table side gauges, hold-down finger guard with non
Categories:
  • X machine tools (39)
  • X Shears & Shearing Equipment (39)
  • X Miscellaneous - Shears & Shearing Equipment (39)
Condition:
Price:
  •  to 
1 | 2