buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Waterbury-Farrel

Waterbury-Farrel Machine Tools For Sale

41 new & used Waterbury-Farrel machine tools items for sale
1
Refine: Viewing 1 - 41 of 41 matches
Sort by:
Items Per Page:  20 |  50  |  100
WATERBURY FARREL 4 SLIDE 00-SDDS (14393)
$RFQ
WATERBURY FARREL 4 SLIDE 00-SDDS (14393)
MANUFACTURER: WATERBURY FARREL (USA)TYPE: FOUR SLIDE WIRE MACHINEMODEL: 00-SDDSDRIVE: 5 HP, 2000 RPM W/ STERLING VARI-SPEED DRIVEREBUILT: 2005
2" WATERBURY FARREL 2 DIE ROTARY SWAGING MACHINE (14324)
$RFQ
2" WATERBURY FARREL 2 DIE ROTARY SWAGING MACHINE (14324)
Capacity, Tubes 2 inches Capacity, Solids
15" ZR16-15 WATERBURY FARREL SENDZIMIR 12 HIGH REVERSING ROLLING MILL Stock # 14279
$RFQ
15" ZR16-15 WATERBURY FARREL SENDZIMIR 12 HIGH REVERSING ROLLING MILL Stock # 14279
ZR 16-15" SENDZIMIR REVERSING COLD STRIP MILLStock # 14279Manufacturer:              &nbsp
6" WATERBURY FARREL 4 HIGH NON REVERSING ROLLING MILL W/EDGING Stock # 14171
$RFQ
6" WATERBURY FARREL 4 HIGH NON REVERSING ROLLING MILL W/EDGING Stock # 14171
Max Width Workpiece 6 inches 6" WATERBURY FARREL 4 HIGH NON REVERSING ROLLING MILLStock
24" 12 HIGH REVERSING WATERBURY FARREL SENDZIMIR ROLLING MILL MATERIAL WIDTH 12"
$RFQ
24" 12 HIGH REVERSING WATERBURY FARREL SENDZIMIR ROLLING MILL MATERIAL WIDTH 12"
24" 12 HIGH REVERSING WATERBURY FARREL SENDZIMIR ROLLING MILLStock # 14136Current Use for:     Copper, Cu-Alloy [ Brass, Bronze, Cu-Ni] MaterialBrand & Year: &nbsp
12" X 12" STANAT 2 HI WIRE FLATTENING ROLLING MILL (14110)
$RFQ
12" X 12" STANAT 2 HI WIRE FLATTENING ROLLING MILL (14110)
12" x 12" STANAT 2 HI WIRE FLATTENING ROLLING MILLSTOCK # 14110ROLL SIZE: 12" X 12" (304.8mm X 304.8mm)ROLL BEARINGS: ROLLERMILL ROLLS: INTERNAL WATER COOLINGMILL STAND CROSS SECTI
12" X 5" WATERBURY FARREL 2 HI WIRE FLATTENING ROLLING MILL (14108)
$RFQ
12" X 5" WATERBURY FARREL 2 HI WIRE FLATTENING ROLLING MILL (14108)
Dimensions 12" X 5" 12" X 5" WATERBURY FARREL 2 HI WIRE FLATTENING ROLLING MILLSTOCK #
4 STAND TANDEM FENN/WATERBURY FARREL WIRE FLATTENING LINE (13838)
$RFQ
4 STAND TANDEM FENN/WATERBURY FARREL WIRE FLATTENING LINE (13838)
4 STAND TANDEM FENN/WATERBURY FARREL WIRE FLATTENING LINE (13838) MACHINE 13838 MANUFACTURER ...................... FENN MFG & WATERBURY FARREL MFG NUMBER OF ROLL STANDS ............. 4 START &
31" (787.4mm) ZR23-31 WATERBURY FARREL SENDZIMIR MILL (13727)
$RFQ
31" (787.4mm) ZR23-31 WATERBURY FARREL SENDZIMIR MILL (13727)
31" (787.4mm) ZR23-31 WATERBURY FARREL SENDZIMIR MILL (13727) MACHINE 13727 Manufacturer: Waterbury Farrel Company USA ZR23-31 Sendzimir 20HI Mill as loaded in containers as follow Strip Width: 370-740 mm Th
25" X 42" WATERBURY FARREL 2 HI NON REVERSING MILL (13129)
$RFQ
25" X 42" WATERBURY FARREL 2 HI NON REVERSING MILL (13129)
MACHINE # 13129 MANUFACTURER: WATERBURY FARREL SPECIFICATIONS MILL SECTION: 2 HI MILL TYPE: NON REVERSING MATERIAL: STAINLESS STEEL, CARBON STEEL STRIP WIDTH DATA MAXIMUM: 37IN/939.802MM MINIMUM: 14IN/355.601MM ENTR
WATERBURY FARREL, No. AV-40, 1970, POWER DRIVEN, UNCOILER (11286)
$RFQ
WATERBURY FARREL, No. AV-40, 1970, POWER DRIVEN, UNCOILER (11286)
MACHINE# 11286 SPECIFICATIONS: MANUFACTURER: WATERBURY FARREL MODEL No.: AV-40 TYPE: POWER DRIVEN UNCOILER SERIAL No.: 224534-56G YEAR BUILT: 1970
8 1/2" WATERBURY FARREL, No. ZR 15 8 1/2, SENDZIMIR ROLLING MILL (1610)
$RFQ
8 1/2" WATERBURY FARREL, No. ZR 15 8 1/2, SENDZIMIR ROLLING MILL (1610)
MACHINE # 1610Manufacturer Waterbury Farrel Co.Model ZR 15 - 8-1/2"Type Saddle Type 1-2-3Roll Size .468" (11.88mm) wor
WATERBURY Mdl# 20 HORIZONTAL HEAVY FRAME THREAD ROLLER
$RFQ
WATERBURY Mdl# 20 HORIZONTAL HEAVY FRAME THREAD ROLLER
One Used 3/8" Waterbury Farrel Model #20 Heavy Frame Hand Feed Flat Die Thread Roller 3/8" Maximum Thread Diameter 3" Maximum Thread Length Maximum Speed 60 SPM Equipped with: 5 HP 2250 RPM 3
WATERBURY Mdl# 10 HORIZONTAL HEAVY FRAME HAND FEED THREAD ROLLER
$RFQ
WATERBURY Mdl# 10 HORIZONTAL HEAVY FRAME HAND FEED THREAD ROLLER
One Used 1/4" Waterbury Farrel Model #10 Heavy Frame Hand Feed Thread Roller Specifications: 1/4" maximum Thread Diameter 2" Die Pocket/Dies 5" x 1" x 2" 60 SPM "V" Ram
WATERBURY Mdl# 20 M8 HORIZONTAL HEAVY FRAME HAND FEED THREAD ROLLER W/HOPPER
$RFQ
WATERBURY Mdl# 20 M8 HORIZONTAL HEAVY FRAME HAND FEED THREAD ROLLER W/HOPPER
Waterbury Model #20 Horizontal Heavy Frame Hand Feed Thread Roller 3/8" Thread Diameter 3" Thread Length 50 SPM Adjustable Pitman Set up for tube feeding AC Motor and Controls weight 7000 Lbs.
WATERBURY Mdl# 20 M8 HORIZONTAL HEAVY FRAME HAND FEED THREAD ROLLER W/HOPPER
$RFQ
WATERBURY Mdl# 20 M8 HORIZONTAL HEAVY FRAME HAND FEED THREAD ROLLER W/HOPPER
Waterbury Model #20 Horizontal Heavy Frame Hand Feed Thread Roller 3/8" Thread Diameter 3" Thread Length 50 SPM Adjustable Pitman Set up for tube feeding AC Motor and Controls weight 7000 Lbs.
WATERBURY FARREL Mdl# 10 AUTOMATIC THREAD ROLLER
$RFQ
WATERBURY FARREL Mdl# 10 AUTOMATIC THREAD ROLLER
1/4" Thread Diameter 2" Thread and Shank Length 150 Pieces per Minute Vibratory Bowl 3 HP 230/460 volt 3 phase 1725 RPM 60 HZ 9.5/4.5 AMPS motor. Weight 3750 Lbs. O.A. Dim. 71" x 52" x
3/8" Waterbury Heavy Frame #20 Automated Flat Die Thread Roller
$RFQ
3/8" Waterbury Heavy Frame #20 Automated Flat Die Thread Roller
No description providedMaximum Thread Diameter3/8" Maximum Thread Length3" Maximum Depth of Die Face3-1/8" Maximum Production125 PPM Approx. Floor Size52" W x 102" L Approx. Weight7,600 lbs
  • Maximum workpiece diameter: 0.375"
  • Maximum workpiece diameter: 0.375"
  • Maximum thread length: 3"
    #20 Waterbury Farrel Heavy Frame Hand Feed Flat Die Thread Roller
    $RFQ
    #20 Waterbury Farrel Heavy Frame Hand Feed Flat Die Thread Roller
    No description providedMaximum Thread Diameter3/8" Maximum Thread Length5" Maximum Speed60 SPM Approx. Weight5,000 lbs With Adjustable Pitman<br />Special 5"&
    • Maximum workpiece diameter: 0.375"
    • Maximum workpiece diameter: 0.375"
    • Maximum thread length: 3"
      1/4" WATERBURY FARREL No. 10 WITH VIBRATORY BOWL FEEDER WITH STAND
      $RFQ
      1/4" WATERBURY FARREL No. 10 WITH VIBRATORY BOWL FEEDER WITH STAND
      MAXUMUM WIRE DIAMETER ................. 0.25" MAXIMUM LENGTH OF THREAD .............. 2" PIECES ERP MINUTE ..................... 150 WEIGHT ................................ 3,295 LBS. O.A. DIM/ ..........
      52" (1320mm) WATERBURY FARREL TYPE ZR-22B-52 COMPLETE REVERSING COLD ROLLING
      $RFQ
      52" (1320mm) WATERBURY FARREL TYPE ZR-22B-52 COMPLETE REVERSING COLD ROLLING
      Mill Section: ZR-22B-52 Mill Type: Cold reversing mill Material: Silicon, Stainless Strip Width: 52" (1300mm) Entry Gauge Max.: 0.145" (3.7mm) Exit Gauge Min.: 0.0028" (0.1mm) Max. Coil Size (win
      1/2" WATERBURY-FARREL #30 HEAVY FRAME HAND FEED FLAT DIE THREAD ROLLER
      $RFQ
      1/2" WATERBURY-FARREL #30 HEAVY FRAME HAND FEED FLAT DIE THREAD ROLLER
      MAXIMUM THREAD DIAMETER ................... 1/2" MAXIMUM THREAD LENGTH ..................... 3" STATIONARY DIE POCKET ..................... 7-1/4" LG X 4" DP MOVABLE DIE POCKET ....................
      1/4" WATERBURY HEAVY FRAME THREADER #10 W/ VIBRATORY BOWL
      $RFQ
      1/4" WATERBURY HEAVY FRAME THREADER #10 W/ VIBRATORY BOWL
      CAPACITY .................. `1/4"`` LENGTH OF THREAD .......... 2-1/8" PPM ........................ 100 EQUIPPED WITH:- VIBRATORY BOWL STAND FOR BOWL E
      WATERBURY FARREL ZR16-835 SENDZIMIR 12-HI ROLLING MILL
      $RFQ
      WATERBURY FARREL ZR16-835 SENDZIMIR 12-HI ROLLING MILL
      WATERBURY FARREL ZR16-8.5 SENDZIMR 12-HI ROLLING MILL Mill Strip Width Max. 8.5" (216mm) Min strip width 4" (100mm) Max. Incoming Thickness .080" (2.0mm) Min. Out Fin
      WATERBURY FARREL M#20-12 ICOP TRANSFER PRESS
      $RFQ
      WATERBURY FARREL M#20-12 ICOP TRANSFER PRESS
      12 Plungers plus 1 aux 3-3/4" Max blank dia. 6" Shut height over dies 3-1/8 Max depth of shell 35-70 SPM 4" Center Distance 24,000# Weight 162" x 85" Approx. Floor Space Can be shown unde
      WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
      $RFQ
      WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
      WATERBURY FARRELL Model 2010 ST2375493237554 10 Stations - round plunger machine 5-1/2" Plunger to top of die 3-3/4" max blank diameter 4" center distance 5-3/8" Stroke 60-90 SPM 17,500
      WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
      $RFQ
      WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
      WATERBURY FARRELL Model 2010 ST2375492237687 10 Stations - round plunger machine 5-1/2" Plunger to top of die 3-3/4" max blank diameter 4" center distance 5-3/8" Stroke 60-90 SPM 17,500
      WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
      $RFQ
      WATERBURY FARREL M#20-10 ICOP TRANSFER PRESS
      WATERBURY FARRELL Model 2010 S6248462598 10 Stations - round plunger machine 5-1/2" Plunger to top of die 3-3/4" max blank diameter 4" center distance 5-3/8" Stroke 60-90 SPM 17,500 #
      WATERBURY FARREL M#15-10 ICOP TRANSFER PRESS
      $RFQ
      WATERBURY FARREL M#15-10 ICOP TRANSFER PRESS
      WATERBURY FARRELL Model 1510 ST23647721236558 10 Stations 3-3/8 Center Distance 3-1/4" Stroke 60-100 SPM 11,000#
      WATERBURY FARREL M#15-10 ICOP TRANSFER PRESS
      $RFQ
      WATERBURY FARREL M#15-10 ICOP TRANSFER PRESS
      WATERBURY FARRELL Model 1510 ST187535192236011 10 Stations 3-3/8 Center Distance 3-1/4" Stroke 60-100 SPM Broken top shaft 11,000#
      WATERBURY-FARREL MODEL #00 AUTO SCREW SLOTTER
      $RFQ
      WATERBURY-FARREL MODEL #00 AUTO SCREW SLOTTER
      SPECIFICATIONS: MAXIMUM SHANK DIAMETER ............... 1/8" MAXIMUM SHANK LENGTH ................. 1" PIECES PER MINUTE .................... 90 - 110 (DEPENDING UPON PULLEY USED) ......... 140 - 175 SAW
      10"x20"x30" (256x508x762mm) WATERBURY 4HI TEMPER MILL
      $RFQ
      10"x20"x30" (256x508x762mm) WATERBURY 4HI TEMPER MILL
      Year: 1979 Work Roll Driven Direction: Left to Right Material: Low/Medium/High Carbon Steel Coil Weight: 12Ton Coil OD/ID: 610mm x 1250mm (24" x 50") Max. Material Width: 650mm (26") Nominal Reducti
      1 1/2" x 8" x 6" WATERBURY FARREL 4-HI ROLLING MILL
      $RFQ
      1 1/2" x 8" x 6" WATERBURY FARREL 4-HI ROLLING MILL
      MANUFACTURER WATERBURY FARREL TYPE 4 HI 1 1/2" x 6" x 6" WORK ROLL DRIVEN EXISTING ROLLS -WORK ROLLS -DIAMETER 1 1/2" (38.1mm) -FACE WIDTH 6" (152.4mm) -BACK UP ROLLS -DIAMETER 6&#
      WATERBURY FARREL ZR33-13 SENDZIMIR ROLLING MILL
      $RFQ
      WATERBURY FARREL ZR33-13 SENDZIMIR ROLLING MILL
      WATERBURY FARREL ZR33-13 SENDZIMIR ROLLING MILL MFG - WATERBURY FARREL I2S ELECTRICAL UPGRADE IN 2000 MODEL - ZR33-13 MATERIAL - CARBON STEEL & STAINLESS STEEL THICKNESS RANGE - .187" - .010" LINE SPEE
      WATERBURY FARREL ZR15 8-1/2 SENDZIMIR ROLLING MILL
      $RFQ
      WATERBURY FARREL ZR15 8-1/2 SENDZIMIR ROLLING MILL
      Manufacturer Waterbury Farrel Co. Model ZR 15 - 8-1/2" Type Saddle Type 1-2-3 Roll Size .468" (11.88mm)
      WATERBURY FARREL "SENDZIMIR" ZR16-8 1/2 ROLLING MILL
      $RFQ
      WATERBURY FARREL "SENDZIMIR" ZR16-8 1/2 ROLLING MILL
      MANUFACTURER WATERBURY FARREL MODEL ZR-16-8 1/2 SADDLE TYPE TYPE 12-HI SENDZIMIR ROLLING MILL PREVIOUS USE -MATERIAL NICKEL ALLOYS (SUITABL
      WATERBURY-FARREL #1210 (#3) I.C.O.P. AUTO. TRANSFER PLUNGER PRESS
      $RFQ
      WATERBURY-FARREL #1210 (#3) I.C.O.P. AUTO. TRANSFER PLUNGER PRESS
      TWIN DISC CLUTCH 10 STATION 2-7/8" CENTER DISTANCE BETWEEN STATIONS 1-7/8" BLANK DIAMETER 2-3/4" CAM STROKE 1-1/4" DEPTH OF DRAW DELAY STRIPPERS MOTORS AND CONTROLS CLARKTON SENSOR UNIT GUAR
      1/4" WATERBURY DSSD ROD HEADER
      $RFQ
      1/4" WATERBURY DSSD ROD HEADER
      MAKE: WATERBURY DIE POCKET: 4" MAX. WIRE DIAMETER: 1/4" FLYWHEEL RPM: 120 EATON AIR CLUTCH FLOOR SPACE 42" X 33" WEIGHT 2100#
      WATERBURY #22 O.D.D.S. COLD HEADER
      $RFQ
      WATERBURY #22 O.D.D.S. COLD HEADER
      MAX WIRE DIA ............ 3/8" MAX SHANK LENGTH ........ 6" MIN SHANK LENGTH ........ 1" MAX CUTOFF LENGTH ....... 7-3/4" 80 PPM WEIGHT .................. 23,000 POUNDS O.A. DIM. ...........
      9/16" WATERBURY-FARREL M#100, RAY CARL 2 DIE 3 BLOW COLD HEADER
      $RFQ
      9/16" WATERBURY-FARREL M#100, RAY CARL 2 DIE 3 BLOW COLD HEADER
      SPECIFICATIONS: MAX. WIRE DIAMETER ................... 9/16", MAX 70,000 PSI MAX. SHANK LENGTH .................... 4" MAX. WIRE CUTOFF ..................... 4" SPEED ................................
      10,000 LBS X 52" WEAN MOTORIZED UNCOILER: STOCK #56133
      $RFQ
      10,000 LBS X 52" WEAN MOTORIZED UNCOILER: STOCK #56133
      SERIAL ............. 7665-69 MODEL .............. FR2114 CAPACITY ........... 10,000 LBS WIDTH .............. 52" INSIDE DIAMETER .... 17" TO 20" OUTSIDE DIAMETER ... 64" MAXIMUM BRAKE .............. AI
      Categories:
      Condition:
      Manufacturer:
      • X Waterbury Farrel (41)
      Location:
      Price:
      •  to 
      1