buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > Gleason

Used Gleason Machine Tools

56 used Gleason machine tools items for sale
1 | 2 | 3
Refine: Viewing 1 - 20 of 56 matches
Sort by:
Items Per Page:  20  |  50 |  100
GLEASON MODEL 140 ROLLER QUENCH PRESS
Serial No. 687401 New 1971 Motor Driven with 1.5 HP AC Roller Drive Motor. 5 HP Pump at a Rate of 360 GPM. SPECIFICATIONS: Capacity 4" Dia. x 40" Long Min. Shaft Diameter
MODEL 116 GLEASON GEAR GENERATOR ROUGHER
EQUIPPED WITH: Modified Roll Coolant System Hydraulic System Hydraulic Chucking Change Gears Gaurding E-Stop SPECIFICATIONS: Maximum Pitch Diameter: 18" Maximum Rate: 10/1 Maximum Cone Distance:
MODEL 116 GLEASON SPIRAL BEVEL GEAR GENERATOR
EQUIPPED WITH: Coolant System Hydraulic System Hydraulic Chucking Change Gears Guarding E-Stop SPECIFICATIONS: WORKPIECE CAPACITY: Automotive Version (Jobbing Version) Y Extreme Ratio: 4:1 (10:1)
MODEL 13 GLEASON CUTTER SHARPENER
EQUIPPED WITH: SPECIFICATIONS: CAPACITY: Diameter of Spiral Cutter:3-1/2" - 18" Revacycle Cutters, Infeed Attachment:16" - 25" Coniflex Cutters:9"-15" Wheel Size:12" x 3/4
MODEL 17A-4000 GLEASON GEAR TESTER
center> EQUIPPED WITH: Automatic Backlash Control Hydraulic Chucking Variable Drive Spindle Workholding Dial Indicator Load Meter SPECIFICATIONS: Diameter of Gear: 18" Max. Offset Of Gear Spdl.
MODEL 516 GLEASON GEAR LAPPER
EQUIPPED WITH: Hydraulic Chucking Lapping System Drawbar Work Holding SPECIFICATIONS: Capacity: Diameter of Gear (Max): 24" Diameter of Pinion (Max): 12" Offset of Gear Spindle Above or Belo
MODEL 26 GLEASON HYPOID GEAR GENERATOR
EQUIPPED WITH: Modified Roll Hydraulic Work Holding Draw Bar Coolant System Change Gears *Cutter Bodies Available SPECIFICATIONS: Maximum Diameter Gear: 33" Cone Distance Max (30 deg. and 18" C
MODEL 22 GLEASON HYPOID GEAR GENERATOR ROUGHER
center> EQUIPPED WITH: Hydraulic Chucking Coolant Index Plates Gears SPECIFICATIONS: Machine Capacity: Longest Cone Distance:11" Largest Pitch Angle: 90 deg. Smallest Pitch Angle (without chamfer
MODEL 22 GLEASON HYPOID GEAR GENERATOR FINISHER
center> EQUIPPED WITH: Stock Divider Hydraulic Chucking Lube Coolant Index Plates Change Gears SPECIFICATIONS: Machine Capacity: Longest Cone Distance:11" Largest Pitch Angle: 90 deg. Smallest
MODEL 11 GLEASON HYPOID GEAR GENERATOR ROUGHER
center> EQUIPPED WITH: Hydraulic Chucking Index Plate Change Gears SPECIFICATIONS: Capacity: Cone distance: 9" Largest pitch angle: 82 Degrees, 52' Smallest pitch angle: 45 Degrees Extreme rati
MODEL 11 GLEASON HYPOID GEAR GENERATOR FINISHER
center> EQUIPPED WITH: Stock Divider Coolant Hydraulic Chucking Index Plate SPECIFICATIONS: Capacity: Cone distance: 9" Largest pitch angle: 82 Degrees, 52' Smallest pitch angle: 45 Degrees Ex
12" GLEASON GEAR GENERATOR
EQUIPPED WITH: Gauges Full Set of Gears w/Cabinet Power Chucking Dividing Gauge Hydraulic Unit Upper & Lower Tool Blocks Motor & Push Button Controls Operator's Manual SPECIFICATIONS: Max. Pitch Diameter:
Model 17A-4000 Gleason Gear Tester
S/N: 606915 EQUIPPED WITH: Hydraulic Chucking. Workholding. Adjustable Jog Speeds. Potentiometers For Adjusting Acceleration And Deceleration Speeds. Lever Mounted Push Buttons For Slow/Fast, Braking. Backlash
  • Maximum gear diameter: 20"
    Gleason Model 22 Formate Hypoid Gear Generator (2)
    1- Gleason Model 22 Formate Hypoid Gear Rougher 1- Gleason Model 22 Formate Hypoid Gear Finisher EQUIPPED WITH: Hydraulic Clamping. Stock Dividers. SPECIFICATIONS: Longest Cone Distance 11" Largest Pitc
    • Maximum gear diameter: 22"
      MODEL 608 GLEASON SPIRAL BEVEL GEAR GENERATOR/ROUGHER
      EQUIPPED WITH: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available SPECIFICATIONS: Min. Outside Cone
      GLEASON #16 BEVEL GEAR GENERATOR
      GLEASON #16 BEVEL GEAR GENERATOR STOCK #110964 NEW-1975 SPECIFICATIONS: CAPACITY....................................: EQUIPPED WITH: PRICE....................: ${please call for price}
      GLEASON MODEL 463 HYPOID GEAR GRINDER
      STOCK #110963 REF #110963 NEW-1975 SPECIFICATIONS: STOCK # Maximum Cone Distance....................... (30-Degree Spiral Angle w/12" Dia Wheel)...................... 15"/(381mm) Maximum Pitc
      No. 528 CUTTER INSPECTION -Spiral and Straight Coniflex- Revecycle
      center> The No. 528 Cutter Inspection Machine provides a means whereby a complete inspection of blade angle and radial truth of Gleason spiral cutters may be easily accomplished. With optional adapters, the
      GLEASON MODEL 528 CUTTER INSPECTION MACHINE
      The No. 528 Cutter Inspection Machine provides a means whereby a complete inspection of blade angle and radial truth of Gleason spiral cutters may be easily accomplished. With optional adapters, the machine can al
      MODEL 17A GLEASON GEAR TESTER
      EQUIPPED WITH: SPECIFICATIONS: Diameter of Gear: 20" Max. Offset Of Gear Spdl. Above Or Below Center Of Pinion Spdl.: 3-1/2" Max. Dis. From Center Of Gear Spdl. To Nose Of Pinion Spdl.: 12" Max,
      Categories:
      Condition:
      • X Used (56)
      Manufacturer:
      • X Gleason (56)
      Price:
      •  to 
      1 | 2 | 3