buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > Eagle

Used Eagle Machine Tools

14 used Eagle machine tools items for sale
1
Refine: Viewing 1 - 14 of 14 matches
Sort by:
Items Per Page:  20  |  50 |  100
EAGLE C-2000 HIGH PRODUCTION HEAVY DUTY TUBE END FORMER (14290)
$RFQ
EAGLE C-2000 HIGH PRODUCTION HEAVY DUTY TUBE END FORMER (14290)
Tube Dia 3 inches EAGLE high production heavy duty tube end forming machine-used-Stock
3" EAGLE EF TUBE END FORMER
$RFQ
3" EAGLE EF TUBE END FORMER
order 3 MODEL #:  EFSERIAL #:  14713" MAXIMUM CAPACITYSINGLE HEADFOR
6" EAGLE SUPER E TUBE END FORMER
$RFQ
6" EAGLE SUPER E TUBE END FORMER
order 6 MODEL #:  SUPER ESERIAL #:  6" CAPACITYDROP IN TOOLINGREDUCE
2-3/4″ (69.8 mm) EAGLE #E End Former
$RFQ
2-3/4″ (69.8 mm) EAGLE #E End Former
Stock #3734 Manufacturer: EAGLE PRECISION INDUSTRIES Model #E Serial #2143 Max Tube OD: 2-3/4″ (69.8 mm) Min Tube OD: 1″ (25 mm) Length of Size: 4.25″ (108 mm) Capabilities: -Expanding I.D. -Reducing O.D. -Slot
  • Maximum diameter: 2.75"
    Eagle SH4-200-140-80 Straight Side Hydraulic Press
    $RFQ
    Eagle SH4-200-140-80 Straight Side Hydraulic Press
    Reference #30689 Eagle SH4-200-140-80 Straight Side Hydraulic Press CAPACITY: Tonnage Capacity ..................... 200 Ton Bed and Ram Overall Length ........... 140" Bed and Ram Width ...................
    • Tonnage: 200T
    • Stroke: 12"
      3-1/4" Eagle Vertical I/O 2000, OD&ID Sizing End Former, 4-1/2&quo
      $RFQ
      3-1/4" Eagle Vertical I/O 2000, OD&ID Sizing End Former, 4-1/2&quo
      The Eagle I/O 2000 End Forming OD & ID Sizer is best used whenever there is a need for improved accuracy and control of inside or outside diameter of the tube. Unlike "C" tooling systems used in the C, E,
      2.75" Eagle #E2000, tube end former, A-B SLC 500 control, 10 HP, 1995, #8992
      $18,500
      2.75" Eagle #E2000, tube end former, A-B SLC 500 control, 10 HP, 1995, #8992
      no description provided
      Eagle Z302 Roll Horizontal Or Vertical
      $RFQ
      Eagle Z302 Roll Horizontal Or Vertical
      Eagle Z302 Roll Horizontal Or Vertical
      3' x 9/32", EAGLE, No. A314-10/7, 5.9" rolls, 13 fpm, 6 HP, NEW
      $RFQ
      3' x 9/32", EAGLE, No. A314-10/7, 5.9" rolls, 13 fpm, 6 HP, NEW
      OPTIONAL ACCESSORIES: Cone bending device . . . . . . . . . . . . . . . . . . . . . . . . $ 700.00 Induction hardened rolls. . . . . . . . . . . . . . . . . . . . . . 880.00 Shaft extension for section bending r
      3' x 1/4", EAGLE, No. TSI 3/1, 5.35" rolls, 14 fpm, 4 HP, NEW
      $RFQ
      3' x 1/4", EAGLE, No. TSI 3/1, 5.35" rolls, 14 fpm, 4 HP, NEW
      TSI 3/1 STD, 3' x 1/4" equipped with cone device, extended shafts and oil tank full . . . . . . . . . . . . . . . . . . . $17,100.00 TSI 3/1 EXP, 3' x 1/4" equipped with mobile console with push buttons, co
      EAGLE, 2 1/4" X 2 1/4" X 1/4", CPS-50-REV, hydraulic, 3 rolls driven vari s
      $RFQ
      EAGLE, 2 1/4" X 2 1/4" X 1/4", CPS-50-REV, hydraulic, 3 rolls driven vari s
      OPTIONAL ACCESSORIES: Rolls for sch 40 pipe--2" . . . . . . . . . . . . . . . . . . . POR Inland freight from Stapleton, AL . . . . . . . . . . . . . . 800.00 Rolls for angle iron leg out/in . . . .
      RTC (RUJA) M# EAGLE IV DOUBLE END, MAGAZINE FEED, PLANETARY THREAD ROLLER
      $RFQ
      RTC (RUJA) M# EAGLE IV DOUBLE END, MAGAZINE FEED, PLANETARY THREAD ROLLER
      MAX THREAD DIAMETER .......... 1/2" MAX THREAD LENGTH ............ 4-1/8 ON ONE END 5-1/8 ON OTHER END MAX BLANK LENGTH ............. 50" PRODUCTION RATE .............. 0 -180 PPM WEIGHT (APPROX) .........
      RTC M# EAGLE IV THREAD ROLLER
      $RFQ
      RTC M# EAGLE IV THREAD ROLLER
      MAX THREAD DIAMETER ....... 1/2" MAX THREAD LENGTH ......... 4-1/8" (EACH END) MAX BLANK LENGTH .......... 36" PRODUCTION RATE ........... 0 -180 PPM WEIGHT .................... 6,550 LBS. O.A. DIM. .
      2-3/4" EAGLE TUBE ANGLE END CUTTING MACHINE: STOCK #18763
      $RFQ
      2-3/4" EAGLE TUBE ANGLE END CUTTING MACHINE: STOCK #18763
      MODEL ............................ 85-349 TC MITRE CUT MACHINE IS A COMPACT, SELF CONTAINED UNIT DESIGNED FOR CUTTING A DOUBLE ANGLE ON THE END OF A STEEL TUBE CAPACITY ......................... 2-3/4" WALL S
      Categories:
      Condition:
      • X Used (14)
      Manufacturer:
      • X Eagle (14)
      Location:
      Price:
      •  to 
      1