buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > American

Used American Machine Tools

30 used American machine tools items for sale
1 | 2
Refine: Viewing 1 - 20 of 30 matches
Sort by:
Items Per Page:  20  |  50 |  100
American Turnmaster 15" x 50" Engine Lathe
$RFQ
American Turnmaster 15" x 50" Engine Lathe
CAPACITY: Maximum Swing Over Bedways ............ 15" Maximum Swing Over Crosss Slide ....... 9" Distance Between Centers .............. 50" Spindle Speeds (18) ................... 2,000 RPM Spindle Motor ..........
4000Lb Cap. 24" Width American 60 UNCOILER, Motorized
$6,250
4000Lb Cap. 24" Width American 60 UNCOILER, Motorized
  AMERICAN STEEL LINE MOTORIZED UNCOILER* MODEL 60        S/N 8004       NEW 1988   Capacity .................... 4,000 lbs. Rated width ...
4000Lb Cap. 24" Width American 4000 UNCOILER, Motorized
$6,250
4000Lb Cap. 24" Width American 4000 UNCOILER, Motorized
  AMERICAN STEEL LINE MOTORIZED UNCOILER* MODEL 60        S/N 7942       NEW 1987   Capacity .................... 4,000 lbs. Rated width ...
6 HEAD AMERICAN SPOT WELDER
$RFQ
6 HEAD AMERICAN SPOT WELDER
order 99999 MODEL #:  N/A SERIAL #:  95012 6 HEAD INTERTRON SINGLE P
AMERICAN MODEL 24" ENGINE LATHE
$5,000
AMERICAN MODEL 24" ENGINE LATHE
3 JAW 24" CHUCK
  • Swing: 15"
  • Centers: 96"
    8' x 15" AMERICAN MODEL 65 RADIAL ARM DRILL
    $RFQ
    8' x 15" AMERICAN MODEL 65 RADIAL ARM DRILL
    8' x 15"&nbsp; AMERICAN MODEL 65 RADIAL ARM DRILL<br /> <br /> New 1974<br /> <br /> Motor Driven with 7-1/2/3-3/4 HP, 3-Phase, 60-Cycle, AC Motor and Controls. 5 HP Arm Motor<br /> <
    30 KVA 24" Throat American AR 33-24 SPOT WELDER, Rocker Type
    $1,950
    30 KVA 24" Throat American AR 33-24 SPOT WELDER, Rocker Type
      30 KVA AMERICAN ROCKER TYPE SPOT WELDER MODEL AR 33-24        S/N 52109            KVA .........................................
    AMERICAN HOLE WIZZARD 6' X 17" COLUMN
    $4,500
    AMERICAN HOLE WIZZARD 6' X 17" COLUMN
    DRILL COMES WITH 2 SIDED TABLE, IS ATTACHED TO 1" PLATE WITH 6" SIDES AS A CATCH BASIN TO COLLECT FLUIDS. IS SET UP FOR 240/460VAC 3 PHASE. NEEDS A GOOD PRESSURE WASH AND PAINT IF YOU WANT IT TO LOOK GOOD.
    • Arm length: 6'
    • Column diameter: 17"
      4,000# AMERICAN STEEL LINE DOUBLE END UNCOILER
      $RFQ
      4,000# AMERICAN STEEL LINE DOUBLE END UNCOILER
      4,000 Lbs AMERICAN STEEL LINE DOUBLE END UNCOILER CAPACITY ............. 4,000 Lbs PER ARM
      AMERICAN METAL WASH TANK
      $RFQ
      AMERICAN METAL WASH TANK
      EQUIPPED WITH: 125 Gallon Tank Heated Wash Cycle Steel Chip Strainer Timer and Temperature Control SPECIFICATIONS: Inside Dimensions: 38"x38"x32"H Door Opening: 42" x 36"H Max. Weig
      13" X 40" AMERICAN MACHINE GEARED HEAD ENGINE LATHE
      $RFQ
      13" X 40" AMERICAN MACHINE GEARED HEAD ENGINE LATHE
      13" X 40" AMERICAN MACHINE GEARED HEAD ENGINE LATHE
      42" X 120" AMERICAN ENGINE LATHE
      $RFQ
      42" X 120" AMERICAN ENGINE LATHE
      42" X 120" AMERICAN ENGINE LATHE
      20" X 100" Used American Pacemaker Engine Lathe
      $RFQ
      20" X 100" Used American Pacemaker Engine Lathe
      Swing Over Bed Ways 30" Swing Over Cross Slide 20" Compound Travel 4" Carriage Length On Bed 26-3/4" Center Distance 100" Spindle Hole 2" Spindle Speeds (27) 26 To 1,600 Rpm's Spi
      American Shaft Type Pacemaker Lathe
      $RFQ
      American Shaft Type Pacemaker Lathe
      Category Lathes - Shaft Type Manufacturer American Model Pacemaker Serial Number 75158-56 Year 1956 / New Retrofit Swing Over Bed 33.00 in 838.2 mm Swing Over Cross Slide 19.00 in 482.6 mm Distance Between Centers
      4' x 13" American Radial Drill, Model Hole Wizard
      $7,950
      4' x 13" American Radial Drill, Model Hole Wizard
      Machine Specs: Column Diameter 13" Arm Length 4' Face of Column to spindle Center 4
      AMERICAN Hole Wiazard Radial Arm Drill
      $RFQ
      AMERICAN Hole Wiazard Radial Arm Drill
      1957 AMERICAN HOLE WIZARD RADIAL ARM DRILL #101766 MAKE: American MODEL: Hole Wizard AGE: 1957 ARM: 6’ COLUMN: 15” TAPER: #4 Morse Taper SPEED: 20 – 1600 RPM
      • Arm length: 6'
      • Column diameter: 15"
        6000# x 48" AMERICAN STEEL UNCOILER
        $RFQ
        6000# x 48" AMERICAN STEEL UNCOILER
        6000# X 48" AMERICAN STEEL UNCOILER MFG - AMERICAN STEEL S/N - 5669 TYPE - MANDREL UNCOILER MAX WIDTH - 48" COIL ID MIN - 14.5" COIL OD - 36.5"
        32" X 312" AMERICAN ENGINE LATHE: STOCK #61876
        $RFQ
        32" X 312" AMERICAN ENGINE LATHE: STOCK #61876
        SERIAL ............................ 72551-51 MODEL ............................. 32" X 312" SWING OVER WAYS ................... 32" SWING OVER CARRIAGE ............... 19" DISTANCE BETWEEN CENTERS ..........
        5'15" American Radial Arm Drill
        $22,500
        5'15" American Radial Arm Drill
        5'15" American Radial Arm Drill S/N: 77566 Mfg: 1965 Specifications: Column Diameter: 15" Arm Length: 5' Drills to Center of Circle: 120" Working surface of Base: 72" x
        • Arm length: 5'
        • Column diameter: 15"
          60"/78" X 14' AMERICAN TURNMASTER ( LAGUN ) GAP BED LATHE
          $RFQ
          60"/78" X 14' AMERICAN TURNMASTER ( LAGUN ) GAP BED LATHE
          60"/78" X 14' AMERICAN TURNMASTER ( LAGUN ) GAP BED LATHE MODEL LD60 MANUFACTURED 1999 RACO Stock Number R017747 SWING OVER BED ------------------------------- 60-1/8" SWING OVER CROSS SLIDE -
          • Swing: 60"
          • Centers: 168"
            Categories:
            Condition:
            • X Used (30)
            Manufacturer:
            • X American (30)
            Location:
            Price:
            •  to 
            1 | 2