buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Paxson

Paxson Machine Tools For Sale

13 new & used Paxson machine tools items for sale
1
Refine: Viewing 1 - 13 of 13 matches
Sort by:
Items Per Page:  20  |  50 |  100
52" x 6" x 30,000# loop type, slitting Line, Paxson, complete
Paxson loop type, driven head, slitting line, complete, two drop in heads, entry above ground coil car, entry peeler/pinch rolls, driven slitting head, cross over table, tension stand, recoiler, coil push off, to turnsti
  • Maximum workpiece width: 52"
  • Maximum workpiece thickness: 0"
    60" x 40,000# Recoiler, Paxson, hydraulic expansion & push off
    Paxson Recoiler, 60" wide x 40,000#, 50hp, hydraulic push off, hydraulic mandrel expansion 20" ID, brake, complete
    • Maximum weight capacity: 40000Lb
    • Maximum coil width: 60"
      Paxson 2-roll vertical rolling mill, roller feeder, 6" dia x 49.5"
      Here is a Paxson vertical 2-roll mill or feeder. The rolls are solid steel 6" dia x 49.5" long. They are supported by spherical roller bearings. The upper overarm support is fastened to the top roll bearing
      50" x 30,000 LBS (EST)PAXSON MANDREL UNCOILER W/ HOLD DOWN ROLL
      Manufacturer - Paxson Mandrel Width - 50" Mandrel I.D. - 16" to 20" Floor to bottom of Mandrel - 32.50" Motor - 5 HP 230/460 Volt 3 Phase 1740 RPM 3.6/6.8 Amps Hold Down Roll - 26-3/4"
      60" X .105" X 40,000# PAXSON CUT-TO-LENGTH LINE
      Thickness Range: .105 - .018 Complete Line Featuring: -L-Type Coil Car Floor Standing / Self Contained Hydraulics Mandrel Uncoiler: Serial Number 11481-3 4 Leaf hydraulic Expansion Powered Hold Down Roll Sli
      48" X 20,000# PAXSON RECOILER
      NEW 1963 MANUFACTURER: PAXSON MACHINE CO. CAPACITY: 20,000 LBS. MAX. COIL WEIGHT TYPE: EXPANDING MANDREL TYPE OF EXPANSION: HYDRAULIC MANDREL SIZE: MANDREL O.D.: 19-1/2" - 20-1/2" WIDTH: 52
      72" x 10,000# PAXSON BANDING LINE
      SPECIFICATIONS: 72" x 10,000# DOWNLAYER RIGHT ANGLE DISCHARGE 80" ROLL FACE COMPLETE WITH: 12' POWERED CONVEYOR SIGNODE BANDING HEAD TABLE 3 CONICAL ROLLS 20' EXIT CONVEYOR WITH CUT-OUT FOR COIL I
      20" X 3.75" X 10,000 Lb. PAXSON Slitting Line
      SPECIFICATIONS: PAXSON SLITTER HEAD: Serial Number: 200 Maximum Strip Width: 20" Arbor Diameter: 3.75" EQUIPPED WITH: Push Buttons PAXSON RECOILER: Maximum Strip Width: 20" EQUIPPED WITH: Push-Off Arm Over
      • Maximum workpiece width: 20"
        60" X 10 GAUGE PAXSON EDGE TRIMMER: STOCK #58714
        CAPACITY ....................... 2 CUTS @ 135 WIDTH .......................... 60" LINE SPEED ..................... 150 FPM DIRECTION ...................... R-L AC MOTOR ....................... YES
        24,000 Lb. (10.8 MT), PAXSON, TWO ARM POWER TURNSTILE, (11476)
        MACHINE# 11476 SPECIFICATIONS: MANUFACTURER: PAXSON MACHINE CO. (U.S.A.) TYPE: TWO ARM POWER TURNSTILE LENGTH OF EACH ARM: 48" (1220mm) DIAMETER OF EACH ARM: 12" (305mm)
        20,000 LB (9072 KG) x 40" (1016mm), PAXSON, 14/16" ID, 5HP, SLIDING BASE (10608)
        MACHINE # 10608 MANUFACTURER: PAXON MACHINE COMPANY U S A CAPACITY: COIL WEIGHT: 20,000 LBS (9090 KILOS) COIL WIDTH: 40" (1016mm) COIL ID: 14"/16" (355.6mm/409mm) D
        20,000 Lb. (9072 kg) x 40" w. PAXSON, 17/18/20 ID, 40HP DC, SLIDING BASE (10609)
        MACHINE # 10609 MANUFACTURER: PAXSON MACHINE COMPANY U S A CAPACITY WEIGHT: 20,000 LBS (9072 KILOS) COIL ID: 17"(432mm)/18"(457mm)/20"(508mm) WITH SHOE PLATES COIL WIDTH:
        20,000 Lb. (9072 KG) x 48" (1219mm) PAXSON, W/OVERARM SEPARATOR, 60 HP (6583)
        MACHINE #6583 MANUFACTURER: PAXSON MACHINE CO. CAPACITY: 20,000 LBS. MAX. COIL WEIGHT TYPE: EXPANDING MANDREL TYPE OF EXPANSION: HYDR
        Manufacturer:
        • X Paxson (13)
        Price:
        •  to 
        1