buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Machining Centers - CNC > California

CNC Machining Centers in California For Sale

231 new & used cnc machining center items for sale in California
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 231 matches
Sort by:
Items Per Page:  20  |  50 |  100
OKK HM1000 , 55.12" X, 43.31" Y, 39.37" Z NEW: 2006
$RFQ
OKK HM1000 , 55.12" X, 43.31" Y, 39.37" Z NEW: 2006
SPECIFICATIONS: TRAVELS: X AXIS: 55.12" Y AXIS: 43.31" Z AXIS: 39.37" RAPID TRANVERSE RATE: 48M/MN(1889IPM) SPINDLE SPEEDS: 35 TO 12,000 (OP: 8,000 GEAR) SPINDLE MOTOR: 40/33HP MAGAZINE CAPACITY: 6
KURAKI KBT-11A , 66.93" X, 59.06" Y, 45.28" Z NEW: 2004
$RFQ
KURAKI KBT-11A , 66.93" X, 59.06" Y, 45.28" Z NEW: 2004
SPECIFICATIONS: STROKE: X AXIS TRAVEL (TABLE LONGITUDINAL): 66.93" Y AXIS TRAVEL (SPINDLE HEAD VERTICAL): 59.06" Z AXIS TRAVEL (COLUMN CROSS): 45.28" W AXIS TRAVEL (BORING SPINDLE AXIAL): 19.69"
HAAS DM-2 , 28" X, 16" Y, 15.5" Z NEW: 2016
$RFQ
HAAS DM-2 , 28" X, 16" Y, 15.5" Z NEW: 2016
SPECIFICATIONS: TRAVLES: --X AXIS: 28" --Y AXIS: 16" --Z AXIS: 15" SPINDLE HP: 15 SPINDLE SPEED: 10,000 RPM MAX TORQUE: 46 [email protected] RPM DRIVE SYSTEM: INLINE DIRECT DRIVE TAPER: CAT 40 TABLE DI
MORI SEIKI NVX-5080 , NEW: 2013
$RFQ
MORI SEIKI NVX-5080 , NEW: 2013
SPECIFICATIONS: TRAVELS: --X AXIS: 31.5" --Y AXIS: 20.9" -- Z AXIS: 20.1" MAX TABLE LOAD: 2,205LBS TABLE LENGTH: 43.3" TABLE WIDTH: 23.6" EQUIPPED WITH: None at this time.
DMG MORI NHX-5000, M730BM MAPPS 4 CNTRL NEW: 2013
$RFQ
DMG MORI NHX-5000, M730BM MAPPS 4 CNTRL NEW: 2013
SPECIFICATIONS: TRAVELS: --X AXIS: 28.7" --Y AXIS: 28.7" --Z AXIS: 34.5" PALLET SIZE: 500mm PALLET SIZE: 19.7" X 19.7" TOOL MAGAZINE CAPACITY: 60 ATC SPINDLE SPEED: 12,000 RPM SPINDLE TA
HAAS VF-3SS , NEW: 2011
$RFQ
HAAS VF-3SS , NEW: 2011
PECIFICATIONS: TRAVELS: X - AXIS: 15.7" Y - AXIS: 15.7" Z - AXIS: 14.7" SPINDLE SPEED 12,000 RPM SPINDLE TAPER (CAT/BT) HSK-463 TABLE SIZE - L 61" TABLE SIZE - W 30" MACHINE EQUIPPED WIT
HAAS, VF-3SS, 40" X, 20" Y, 25" Z, NEW: 2004
$RFQ
HAAS, VF-3SS, 40" X, 20" Y, 25" Z, NEW: 2004
SPECIFICATIONS: TRAVELS: --X: 40" --Y: 20" --Z: 25" TABLE SIZE: 48" X 18" MAXIMUM WEIGHT ON TABLE: 1,750 LBS. SPINDLE TAPER: CAT #40 SPINDLE SPEED - INLINE DIRECT DRIVE: 12,000 RPM SPIND
DOOSAN DNM-400II VERTICAL MACHINING CENTER
$47,700
DOOSAN DNM-400II VERTICAL MACHINING CENTER
SKU 1948 Make DOOSAN Model No. DNM-400II Serial # MV0009-002256 Year 2013/2014 Cutting Time 1890 Hours Condition Like New All specifications are approximations, and are subject to verification. “on our Floo
  • X axis: 30.2"
  • Y axis: 17.1"
    DOOSAN MYNX 6500/50 VERTICAL MACHINING CENTER
    $77,400
    DOOSAN MYNX 6500/50 VERTICAL MACHINING CENTER
    SKU 1968 Make DOOSAN Model No. MYNX-6500/50 Serial # MV0049-001216 Year 2013/14 Cutting Time Condition Good All specifications are approximations, and are subject to verification. “on our Floor now. Fully
    • X axis: 50.7"
    • Y axis: 26.1"
      OKUMA MC-5VA VMC
      $7,950
      OKUMA MC-5VA VMC
      OSP-5000 CNC CONTROL, 15 HP, 20 ATC, 50 TAPER, 4000 RPM
      • X axis: 41"
      • Y axis: 20"
        HAAS UMC-750 , 30" X, 20" Y, 20" Z NEW: 2015
        $RFQ
        HAAS UMC-750 , 30" X, 20" Y, 20" Z NEW: 2015
        SPECIFICATIONS: TRAVELS: -- X AXIS: 30" --Y AXIS: 20" --Z AXIS: 20" 12,000 RPM 40 + 1 STATION AUTOMATIC TOOL CHANGER (SMTC) 40 TAPER RIGID TAPPING WIRELESS INTUITIVE PROBING SYSTEM- WIPS HIGH SPE
        DOOSAN DNM-750II , 64" X, 30" Y, 25.6" Z NEW: 2018
        $RFQ
        DOOSAN DNM-750II , 64" X, 30" Y, 25.6" Z NEW: 2018
        SPECIFICATIONS: TRAVELS: --X AXIS: 64.0" --Y AXIS: 30.0" --Z AXIS: 25.6" X/Y/Z RAPID TRAVERSE: 945 IPM MAX TABLE CAPACITY: 3,968 LB TABLE SIZE: 64.1" x 29.9" SPINDLE POWER: 21 HP SPINDLE
        DMG MORI DURAVERTICAL 5100 , 41.3" X, 20.9" Y, 20.1" Z NEW:
        $RFQ
        DMG MORI DURAVERTICAL 5100 , 41.3" X, 20.9" Y, 20.1" Z NEW:
        SPECIFICATIONS: TRAVELS: --X AXIS: 41.3" --Y AXIS: 20.9" --Z AXIS: 20.1" WORKING SURFACE: 53.1" X 23.6" TABLE LOAD CAPACITY: 2200 LBS MAX. SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: 40 TAPE
        HAAS VF-2SS , 30" X, 16" Y, 20" Z NEW: 2013
        $RFQ
        HAAS VF-2SS , 30" X, 16" Y, 20" Z NEW: 2013
        SPECIFICATIONS: TRAVELS: X-AXIS: 30" Y-AXIS: 16" Z-AXIS: 20" 24 TOOL SIDE MOUNT TOOL CHANGER BT-40 TAPER RAPID TRAVERSE RATES: 1400 INCH PER MINUTE CUTTING FEED RATES: 833 INCH PER MINUTE SPINDLE
        HAAS VF-4SS , 50" X, 20" Y, 25" Z NEW: 2015
        $RFQ
        HAAS VF-4SS , 50" X, 20" Y, 25" Z NEW: 2015
        SPECIFICATIONS: TRAVELS: X-AXIS: 50" Y-AXIS: 20" Z-AXIS: 25" 24 TOOL TOOL CHANGER BT-40 TAPER RAPID TRAVERSE RATES: 1400 INCH PER MINUTE CUTTING FEED RATES: 833 INCH PER MINUTE SPINDLE NOSE TO TAB
        • X axis: 50"
        • Y axis: 20"
          VISIONWIDE V-TEC SF 3120 Bridge Mill , 125" X, 80" Y, 39" Z,
          $RFQ
          VISIONWIDE V-TEC SF 3120 Bridge Mill , 125" X, 80" Y, 39" Z,
          SPECIFICATIONS: TRAVELS: --X-AXIS: 125" --Y-AXIS: 80" --Z-AXIS: 39" TABLE SIZE: 118" x 71" MAX DIMENSION BRIDGE TO TABLE SURFACE: 47" MAX DISTANCE BETWEEN COLUMNS: 83" SPPINDL
          • X axis: 125"
          • Y axis: 80"
            HAAS VF-4 , 50" X, 20" Y, 25" Z NEW: 2015
            $RFQ
            HAAS VF-4 , 50" X, 20" Y, 25" Z NEW: 2015
            SPECIFICATIONS: ***ONLY 900 CUTTING HOURS*** 18" x 52" Table Size TRAVELS: Travels: --X AXIS: 50" --Y-AXIS: 20" --Z AXIS: 25" 8,100 RPM 24 SIDE MOUNT ATC CAT 40 30 HP EQUIPPED WITH
            • X axis: 50"
            • Y axis: 20"
              HAAS VF-4D , NEW: 2003
              $RFQ
              HAAS VF-4D , NEW: 2003
              SPECIFICATIONS: TRAVELS: --X: 50" --Y: 20" --Z: 25" RAPID RATE X AXIS: 1,000 IPM RAPID RATE Y AXIS: 1,000 IPM RAPID RATE Z AXIS: 1,000 IPM TABLE SIZE: 52" X 18" SPINDLE MOTOR: 20 HP SP
              • X axis: 50"
              • Y axis: 20"
                MATSUURA HPLUS 300PC11 , G-TECH 840 CNTRL NEW: 2007
                $RFQ
                MATSUURA HPLUS 300PC11 , G-TECH 840 CNTRL NEW: 2007
                SPECIFICATIONS: TRAVELS: -X-AXIS: 19.68" -Y-AXIS: 19.68" -Z-AXIS: 19.68" TABLE/PALLET: -SIZE: 11.81" X 11.81" -WORKLOAD: 550 LBS. -INDEXING: 1 DEGREE SPINDLE: -SPEED: 20,000 RPM - DIREC
                HAAS VF-6/50 , 64" X, 32" Y, 30" Z NEW: 2007
                $RFQ
                HAAS VF-6/50 , 64" X, 32" Y, 30" Z NEW: 2007
                SPECIFICATIONS: TRAVELS: -X AXIS: 64" -Y AXIS: 32" -Z AXIS: 30" NUMBER OF TABLES / PALLETS: 1 TABLE SIZE: 64" X 28" SPINDLE NOSE TO TABLE: 5 - 35" RAPID TRAVERSE X, Y, Z: 600, 600, 6
                Related Subcategories:
                Categories:
                Condition:
                Manufacturer:
                Location:
                • X California (231)
                Price:
                •  to 
                1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>