buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Lathes & Turning Centers > Turning Machines CNC

CNC Turning Machines For Sale

14 new & used cnc turning machine items for sale
1
Refine: Viewing 1 - 14 of 14 matches
Sort by:
Items Per Page:  20  |  50 |  100
HAAS ST-25Y , 31.75" SWING, 10" CHK NEW: 2018
SPECIFICATIONS: 12" X 21" (305 X 533 MM) MAX CAPACITY 3.0" (76 MM) BAR 31.75" (806 MM) SWING Y-AXIS TRAVEL 30 HP (22.4 KW) VECTOR DRIVE 3400 RPM A2-6 SPINDLE 10" (254 MM) CHUCK 12-STATIO
DMG MORI SEIKI NTX2000SZM/1500 , 8"
SPECIFICATIONS: BAR CAPACITY: 2.5" CHUCK SIZE: (2) 8" SPINDLE SPEED: (MAIN/SUB) 5,000 RPM SPINDLE MOTOR: (2) 30HP HP X AXIS TRAVEL: 19.5" Z AXIS TRAVEL: 61.4" RAPID RATE Z AXIS: 1,574 IPM TOOL
MAZAK SUPER QUADREX 250 (SQ250) TWIN TURRET CNC TURNING MACHINE
SPECIFICATIONS Chuck Size 10 inches Max. Swing 23 inches Max. Turning Diameter 11.75 inches Max. Turning Length 40 inches Bar Capacity 2.5 inches Tailstock . • Quill Diameter 3.94 inches • Stroke 3.94 inches • Q
Ganesh Cyclone-32 CS Machining Center w/ Bar Feeder
Twin Spindle Milling / Turning Center Make: Ganesh Machinery Model: Cyclone-32 CS / Serial No.: CB97XXXX DOM: 10/2008 Electrics: 220 Volt / 3 Phase / 60 Hertz / 18.33 Amps Main Motor: 7 kW (9.4 HP) Specifications
Doosan V550T CNC Twin Spindle Vertical Turning Center
S/N: LT01035 New: 1999 EQUIPPED WITH: Fanuc Series 18iT CNC Control with full CRT. Keyboard. Load Meters. Handwheel Jog. RS232 Port. Controls for Independent LH/RH Operation and Dual Mode. (2) 15" 3-Jaw Chuc
Nakamura-Tome WT-300 Fanuc 18i-TB Multi-Tasking Opposed Twin Spindle Twin-T
Nakamura-Tome WT-300 Fanuc 18i-TB Multi-Tasking Opposed Twin Spindle Twin-Turret 6 Axis CNC Lathe Please wait for your shipping quote and invoice before sending payment. Under power and ready for inspection. EZ System
38mm (1.5”) Tsugami Model TMU-1 Swiss Type Multi Tasking CNC Lathe
New: 2007 EQUIPPED WITH: Fanuc 18i-TB CNC Control. 10.4" Color LCD. PC / MCIA Interface. Large Quantity of Live and Static Tool Holders. Collets from 1/4"-1.5". Guide Bushings. Swiss Sliding Headstock
2005 Hwacheon Hi-TECH 200CL 11 HP 3.5K RPM 10" Chuck CNC Lathe
2005 Hwacheon Hi-TECH 200CL 11 HP 3.5K RPM 10" Chuck CNC Lathe with Fanuc Oi-TB Control Please wait for your shipping quote and invoice before sending payment. EZ Systems Machine Reference Number: EZ15164 M
3051, Tecno Wasino, JD-1, CNC Double End Turning Machine, 2002
Capacity Maximum swing dia. 9-27/32" Nominal workpiec (D x L) 1" x 1" Maximum workpiece diameter 1-1/2" Maximum workpiece length 2" Distance between centers - Bar capacity 63/64&q
3050, Tecno Wasino, JD-1, CNC Double End Turning Machine, 2005
Capacity Maximum swing dia. 9-27/32" Nominal workpiec (D x L) 1" x 1" Maximum workpiece diameter 1-1/2" Maximum workpiece length 2" Distance between centers - Bar capacity 63/64&q
$19,500
Mazak QT20
GENERAL SPECIFICATIONS ENVELOPE SIZE: 12”X20” LENGTH 2.0 MAX DIAMETER X 36 RPM: 3500 GANTRY: YES KITAGAWA CHUCK VOLTS: 230 PHASE: 3 AVAILABLE UNDER POWER IN METRO DETROIT MICHIGAN SPECIFICATIONS ARE SUBJEC
MAZAK MULTIPLEX 6200Y CNC MULTI TASKING 8-AXIS TURNING CENTER (2005)
MAZAK MULTIPLEX 6200Y CNC MULTI TASKING 8-AXIS TURNING CENTER (2005)
GMC 2040F / 2060F / 2080F CNC Lathes
• Larger size performance machine at low cost • Programmable Frequency Inverter Variable Speed Drive • 10” manual 3-jaw chuck with set reversible jaws • Large spindle bore 2-1/16”, D1-6 • Full enclosure safety front
JET CL-1640ZX CNC Lathe
Swing over Bed: 16 inches Swing Through Gap: 25-7/8" Distance Between Centers: 40" Spindle Bore: 3/1/8" Spindle Mount: D1-8 Spindle Taper W/ Sleeve: MT-7 Range of Spindle Speeds (RPM): 80 - 2000 Ran
Categories:
  • X machine tools (14)
  • X Lathes & Turning Centers (14)
  • X Turning Machines CNC (14)
Condition:
Price:
  •  to 
1