buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Lathes & Turning Centers > CNC Combination Lathes > Haas

Haas CNC Combination Lathes For Sale

33 new & used Haas cnc combination lathe items for sale
1 | 2
Refine: Viewing 1 - 20 of 33 matches
Sort by:
Items Per Page:  20  |  50 |  100
HAAS TL-2 CNC LATHE
$RFQ
HAAS TL-2 CNC LATHE
HAAS TL-2 CNC TOOLROOM LATHE New 2018 Less than 200 Cutting Hours Motor Driven with 10 HP, 3-Phase, 60 Cycle, AC Spindle Drive EQUIPPED WITH: Haas CNC Controls, 10" 3-Jaw Chuck with 3" Hole, Programmable 4-Wa
1999 Haas SL-20 CNC Turning Center
$16,500
1999 Haas SL-20 CNC Turning Center
Specifications: Control .................................................................................................................... Haas Swing ..................................................................
  • Swing: 23"
    Haas TL-4 Oilfield Lathe, 25" Chk Front/Rear, 10.8 Big Bore, 91CC, 55H
    $RFQ
    Haas TL-4 Oilfield Lathe, 25" Chk Front/Rear, 10.8 Big Bore, 91CC, 55H
    New - 2008 SPECIFICATIONS: Bar Capacity................................................10.8" Spindle Bore...............................................10.81" Chuck Size - Front...........................
    HAAS ST-15 ,8" CHK NEW: 2016
    $RFQ
    HAAS ST-15 ,8" CHK NEW: 2016
    SPECIFICATIONS: TRAVELS: --X-AXIS: 7.9" --Z-AXIS: 16" X-AXIS RAPIDS: 30.5 m/min Z-AXIS: 30.5 m/min MAX CUTTING DIAMETER: 14" MAX CUTTING LENGTH W/OUT WORKHOLDING: 16" STD. BAR CAPACITY: 2.5&
    • Swing: 27"
      Haas SL-30T,10"Chk,3"Hole,30"Sw,34"CC, 30HP, Tail, Tool
      $RFQ
      Haas SL-30T,10"Chk,3"Hole,30"Sw,34"CC, 30HP, Tail, Tool
      New - 2007 SPECIFICATIONS: Swing over Apron.........................................................30" Swing over Cross Slide.................................................14.5" Chuck Size.............
      Haas ST-30 Big Bore, 2013, 15″ Chk, Tool Setter, Tailstock, Chip Conveyor
      $RFQ
      Haas ST-30 Big Bore, 2013, 15″ Chk, Tool Setter, Tailstock, Chip Conveyor
      Haas ST-30 Big Bore CNC Turning Center new: 2013 Chuck Size………………………… 15″ Maximum Cutting diameter……………. 21″ Max Cutting length…………………. 26″ Spindle Bore / Bar Capacity…………. 4.62″/4″ Spindle Speed (2 Speed Geared
      • Swing: 21"
      • Centers: 26"
        Haas ST-30, 2011, 12″ 3-Jaw, 21″ Swing, 26″ CC, 3″ Bar Cap., Tool Setter,
        $RFQ
        Haas ST-30, 2011, 12″ 3-Jaw, 21″ Swing, 26″ CC, 3″ Bar Cap., Tool Setter,
        Haas ST-30 CNC Turning Center new: 2011 Chuck Size………………………… 12″ Maximum Cutting diameter……………. 21″ Max Cutting length…………………. 26″ Spindle Bore / Bar Capacity…………. 3.5″ / 3″ Spindle Speed……………………… 3,400 RPM Spi
        • Swing: 21"
        • Centers: 26"
          Haas SL-40LB, 7″ bore, SMW 18.5″ Air chuck, 55 HP, 89″ cc, 40″ swing
          $RFQ
          Haas SL-40LB, 7″ bore, SMW 18.5″ Air chuck, 55 HP, 89″ cc, 40″ swing
          Haas SL-40LB High Performance Option Heavy Duty, Big Bore, Turning Center With Hydraulic Steady Rest New: 2008 Chuck Size………………………. 18.5″ Spindle Bore…………………….. 7.08″ Swing Diameter…………………… 40″ Swing Over Cross S
          • Swing: 40"
          • Centers: 89"
            Haas SL-30T CNC Lathe
            $RFQ
            Haas SL-30T CNC Lathe
            Reference #30796 Haas SL-30T CNC Lathe CAPACITY: Swing Over Bed ........................ 30" Swing Over Cross Slide . .............. 14.5" Distance Between Centers .............. 39" Maximum Cutt
            • Swing: 30"
            • Centers: 39"
              HAAS, HL-2, 20" SWING, NEW: 1997
              $RFQ
              HAAS, HL-2, 20" SWING, NEW: 1997
              MACHINE SPECIFICATIONS: TRAVELS: --X: 8.45" --Z: 20" SWING OVER FRONT APRON: 20" SWING OVER CROSS SLIDE: 9.5" MAX. CUTTING DIAMETER: 10" MAX. CUTTING LENGTH: 20" DISTANCE BETWEEN CEN
              • Swing: 20"
                HAAS, SL-10T, 16.25" SWING, 6.5" Chk, NEW: 2003
                $RFQ
                HAAS, SL-10T, 16.25" SWING, 6.5" Chk, NEW: 2003
                MACHINE SPECIFICATIONS: TRAVELS: --X: 6.25" --Z: 14" MAX SWING OVER FRONT: 16.25" SWING OVER CROSS SLIDE: 8" MAX. CUTTING DIA: 11" MAX. CUTTING LENGTH: 14" BETWEEN CENTERS: 16.5"
                • Swing: 16.25"
                  1997 HAAS HL-2 CNC Turning Center
                  $7,500
                  1997 HAAS HL-2 CNC Turning Center
                  Specifications: Control .................................................................................................................... Haas Swing Over Front Apron .................................................
                  • Swing: 20"
                  • Centers: 24.6"
                    HAAS, SL-30TB, 30" SWING, NEW: 2007
                    $RFQ
                    HAAS, SL-30TB, 30" SWING, NEW: 2007
                    SPECIFICATIONS: TRAVELS & FEEDRATES --X: 11.30" --Z: 34.00" RAPIDS ON X: 710 IN/MIN RAPIDS ON Z: 710 IN/MIN MAX THRUST X: 3400 LB MAX THRUST Z: 5400 LB BIG BORE CAPACITY CHUCK SIZE: 15.
                    • Swing: 30"
                      1999 HAAS SL-30T - SERVO BAR 300 BARFEED, 10" CHUCK
                      $RFQ
                      1999 HAAS SL-30T - SERVO BAR 300 BARFEED, 10" CHUCK
                      SPECIFICATIONS: MAX SWING................... 30” MAX CUTTING DIAMETER........ 17” MAX CUTTING LENGTH.......... 34” BAR CAPACITY................ 3” SPINDLE BORE................ 3.5" SPINDLE NOSE................
                      • Swing: 30"
                      • Centers: 34"
                        HAAS HL-4 CNC Lathe
                        $RFQ
                        HAAS HL-4 CNC Lathe
                        Reference #30711 HAAS HL-4 CNC Lathe CAPACITY: Swing Over Bed ........................ 24" Swing Over Cross Slide ................ 9.5" Distance Between Centers .............. 39" Max. Cutting Di
                        • Swing: 24"
                        • Centers: 39"
                          HAAS SL-20T CNC TURNING CENTER
                          $RFQ
                          HAAS SL-20T CNC TURNING CENTER
                          No description providedType of CNC ControlHaas Chuck Size8 inchesSwing23 inchesTurning Diameter10.3 inchesCenter Distance20 inchesSpindle Bore3 inchesX Axis Travel8.45 inchesZ Axis Travel20 inchesSpindle Speed (RPM)4000
                          HAAS, ST-30SSY, 31.8" SWING, 10" Chk, NEW: 2013
                          $RFQ
                          HAAS, ST-30SSY, 31.8" SWING, 10" Chk, NEW: 2013
                          SPECIFICATIONS: TRAVELS: X-AXIS TRAVEL: 12.5" Y-AXIS TRAVEL: +/- 2" Z-AXIS TRAVEL: 23" X-AXIS FEEDRATE: 472 IPM Y-AXIS FEEDRATE: 472 IPM Z-AXIS FEEDRATE: 945 IPM C-AXIS POSITIONING: .01 DEGREES
                          • Swing: 31.8"
                            2018 HAAS ST-10T & LNS BARFEED 6.5" CHUCK, 3J COLLET, TAILSTOCK, P
                            $RFQ
                            2018 HAAS ST-10T & LNS BARFEED 6.5" CHUCK, 3J COLLET, TAILSTOCK, P
                            SPECIFICATIONS: MAXIMUM SWING 16.5″ MAX TURNING DIAMETER 14″ MAX TURNING LENGTH 14″ BAR CAPACITY 1.75″ SPINDLE BORE 2.31″ SPINDLE NOSE A2-5 SPINDLE MOTOR 20 HP SPINDLE SPEED 6,000 RPM X-AXIS TRAVEL 7.87″ Z-AXI
                            • Swing: 16.5"
                              2002 HAAS MODEL SL-30T CNC LATHE WITH HAAS CONTROL, 10" CHUCK
                              $RFQ
                              2002 HAAS MODEL SL-30T CNC LATHE WITH HAAS CONTROL, 10" CHUCK
                              SWING DIAMETER OVER FRONT APRON: 30" OVER CROSS SLIDE: 14.5" CAPACITIES CHUCK SIZE: 10" STANDARD BAR CAPACITY: 2.5" MAXIMUM CUTTING DIAMETER: 14.5" MAXIMUM CUTTING LENGTH: 34" SP
                              • Swing: 30"
                              • Centers: 34"
                                2014 HAAS MODEL ST-10 CNC LATHE WITH HAAS CONTROL, 6” CHUCK
                                $RFQ
                                2014 HAAS MODEL ST-10 CNC LATHE WITH HAAS CONTROL, 6” CHUCK
                                SWING DIAMETER MAXIMUM PART DIAMETER: 16.5” OVER WEDGE: 16.5” CAPACITIES CHUCK SIZE: 6” MAXIMUM CUTTING DIAMETER: 14” MAXIMUM CUTTING LENGTH: 16” BAR CAPACITY: 1.75” TRAVELS X-AXIS: 7.9” Z-AXIS: 16” FEED
                                Categories:
                                • X machine tools (33)
                                • X Lathes & Turning Centers (33)
                                • X CNC Combination Lathes (33)
                                Condition:
                                Manufacturer:
                                • X Haas (33)
                                Location:
                                Price:
                                •  to 
                                1 | 2