buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Coil Processing & Handling > Slitting Lines

Slitting Lines For Sale

87 new & used slitting line items for sale
1 | 2 | 3 | 4 | 5
Refine: Viewing 1 - 20 of 87 matches
Sort by:
Items Per Page:  20  |  50 |  100
48" x 6" WEAN SLITTING HEAD (13895)
MACHINE 13895 48" x 6.00" Wean Slitter Head SERIAL #: 4870-84 YEAR: 1960'S MATERIAL WIDTH: 48" NOMINAL 49" UNTRIMMED CAPACITY: 0.010 TO 0.135" 6" DIA. x 50" FACE ARBORS MANUAL ENTRY EDGE G
24" (610mm) x 4 1/8" (105mm), RUESCH, DOUBLE LOOP (13848)
MACHINE #13848 General Specifications: Manufacturer: Ruesch Entry Coil ID: 16" to 20" (406mm - 508mm) Exit Coil ID: 6", 12" and 16" (152mm, 304mm, 406mm) Entry and Exit Coil OD: 60" 1524mm) Gauge Range: 0.001" - 0.075" (
18" x 3", STANAT, No. S-180, SLITTING LINE (13870)
MACHINE 13870 18" WIDE X 3" ARBOR STANAT MODEL #S-180 SLITTING LINE Specifications: SERIAL ..................... 58858 MODEL ...................... S-180 WIDTH CAPACITY ............. 18" ARBOR DIAMETER ............. 3" C
66" x 7.5" x 60,000# Pro Eco, triple head, turret recoiler, 1985
Triple injector head 7.5" arbor, 150hp slitter drive, entry turnstyle, entry coil car, uncoiler, peeler with shear and feed up rolls, cross-over table, crop shear, two scrap winders, turret recoiler, 1500 fpm speed,
  • Maximum workpiece width: 66"
  • Maximum workpiece thickness: 0.11"
    48" (1220mm) x 7" (178mm) DAHLSTROM, 12,000 Lbs, SLITTING LINE (13829)
    Machine # 13829 Manufacturer Dhalstrom USA Capacity: 48" (1220mm) Width 0.44" (11mm) - 0.125" (3.175mm) Uncoiler with Coil Car 12,000 Lbs (5454 kilos) Capacity Pinch Rolls Driven
    8.5" x 1.250" RUESCH MODEL 189, RING SLITTING LINE (13807)
    MACHINE 13807 Ruesch Model #189 Slitting Line -Thickness Range: 0.0005" to 0.020" -Speed: 300 FPM Max. -Line Direction: Right to Left Consisting of the following: -Uncoiler: Rapid-Air Model:
    52" x 6" x 30,000# loop type, slitting Line, Paxson, complete
    Paxson loop type, driven head, slitting line, complete, two drop in heads, entry above ground coil car, entry peeler/pinch rolls, driven slitting head, cross over table, tension stand, recoiler, coil push off, to turnsti
    • Maximum workpiece width: 52"
    • Maximum workpiece thickness: 0"
      54" (1371mm) x 9" (228mm), LOOPCO, 40,000 Lbs, 0.010"-.250" MILD STEEL
      MACHINE 13793 MANUFACTURER: LOOPCO Capacity: 0.010" - 0.250" Mild Steel Coil Weight: 40,000# Line Direction: Right to Left Consisting of: -Entry Coil Car: Revolvator 40,000# Capacity 60" wide Bed 72" O.D. Capacity (2) -
      54" (1371mm) x 6" (152mm), BRANER, 20,000 Lbs., 0.012"-0.120" (13792)
      MACHINE 13792 MANUFACTURER: BRANER SERIAL #: SL4488 YEAR: 1983 Material: CR, Mild Steel Coil Weight: 20,000 Lbs Material Thickness: 0.012" - 0.120" Maximum Coil Width: 54" Slitting Capacity: 20 cuts
      50" (1270mm) x 6" (152mm), BRANER, 20,000 Lb. COIL SLITTING LINE (13788)
      MACHINE 13788 SERIAL #: SL4488 YEAR: 1983 Material: CR, Mild Steel Coil Weight: 20,000 Lbs Material Thickness: 0.012" - 0.120" Maximum Coil Width: 54" Slitting Capacity: 20 cuts of 0.018" 20 cuts of
      48" (1219mm) x 7" (178mm) LOOPCO, 40,000 Lbs, 0.015"-.080" LEFT TO RIG
      MACHINE 13790 48" x .015" - .080" X 40,000 LBS. LOOPCO SLITTING LINE (USED) General Specifications: Manufacturer: Loopco Width: 48" Gauge Range: .015" - .080" Weight Capacity: 40,000 Lbs. Line Direction: Left to Right Fo
      48" (1219mm) x 4.75" (121mm) BRANER 20,000# SLITTING LINE (13786)
      MACHINE 13786 48" x 4.75" x 20,000lb Slitting Line YEAR: 1965 -48" Wide -20,000 lb. Capacity -Line Direction: Left to Right Consisting of the following: -Entry Coil Car: Progressive, New in 1993 Model: 82493 S/N: 2952 "L
      60" (1524mm) x .125" (3.1mm), Chicago, w/2 Injection Slitting Heads (13674)
      MACHINE 13674 Manufacturer: Chicago Slitting Type: Maxisota Slitting Line with 2 Injector Heads Capacity: 60" (1524mm) width x 0.125" (3.175mm) thick Coil Weight:
      48" x .150" x 30,000Lbs Stamco Loop Slitting Line
      Make: Stamco Material Width: 12" - 48" Material Thickness: .010" - .150" Weight Capacity: 30,000Lbs Coil ID: 20" - 24" Coil OD: 72" Speed: 740 feet per minute Direction: Left t
      • Maximum workpiece width: 48"
      • Maximum workpiece thickness: 0.15"
        66" x .135" x 60,000Lb Pro-Eco Loop Slitting Line
        Make: Pro-Eco, Width: 12″ – 66″, Thickness: .010″ – .135″, Weight Capacity: 60,000Lb, Coil ID: 20″ – 24″ , Coil OD: 72″, Speed: 1,500fpm, Direction: Right to Left. Entry L-Type Coil Car, Mandrel Uncoiler with Hold-Down R
        • Maximum workpiece width: 66"
        • Maximum workpiece thickness: 0.135"
          54" (1371mm) x 9" (228mm) LOOPCO, DUAL HEAD, 40,000# (18144 KG) COILS (13596)
          MACHINE 13596 54" x 9.00" x 40,000# Loopco Slitting Line Capacity: 0.010" - 0.250" Mild Steel Coil Weight: 40,000# Line Direction: Right to Left Consisting of: -Entry Coil Car: Revolvator 40,000# Capacity 60" wide Bed 72
          60" x .625" x 50ton McKay Slitting Line
          Make: McKay, Coil Thickness: .065″ – .625″, Maximum Material Width: 66″, Weight Capacity: 100,000Lb, Coil ID: Entry 24″ – 30″ / Exit 30″, Coil OD: 90″, Speed: 30 – 150 fpm / 90 – 450 fpm, Direction: Left to Right, Pit Ty
          • Maximum workpiece width: 60"
          • Maximum workpiece thickness: 0.625"
            48" (1219mm) x 6" (152mm) x 30,000 lbs. (13608 KG), ALCOS/WEAN (13587)
            MACHINE 13587 Machine Specifications COIL WEIGHT ....................... 30,000 LBS HAND OF LINE ...................... R-L NUMBER OF CUTS .................... 24 @ .025 & 7 @.125 FLOOR MOUNTED CONSISTING OF: COIL LOADIN
            24" (609mm) x 5" (127mm) RAMEC/RUESCH SLITTING LINE (13591)
            MACHINE 13591 Mfg - Ramec/Ruesch Year - 1993 Max Width - 24" Entry ID - 12"-21" Exit ID - 16" Line Components: Ramec Mandrel Uncoiler Mdl. RPA-6 S/N 1474A Coil ID Range - 12"-21" Max Coil Width - 24" 4-Leaf Hydraulic Exp
            24" x .075" x 6,500Lb Torrington Slitting Line
            Max Width: 24″, Material Thickness: .005″ – .075″, Weight: 6,500Lb, Coil ID: 16″ – 24″, Coil OD: 68″, Direction: Left to Right. Entry Floor Standing Coil Car, Mandrel Uncoiler with Hydraulic Expansion, Slitting Head with
            • Maximum workpiece width: 24"
            • Maximum workpiece thickness: 0.075"
              Categories:
              • X machine tools (87)
              • X Coil Processing & Handling (87)
              • X Slitting Lines (87)
              Condition:
              Price:
              •  to 
              1 | 2 | 3 | 4 | 5