buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Chip Systems / Coolant > Illinois

Chip Systems & Coolant Systems in Illinois For Sale

9 new & used chip system & coolant system items for sale in Illinois
1
Refine: Viewing 1 - 9 of 9 matches
Sort by:
Items Per Page:  20  |  50 |  100
TRANSOR MODEL 18390-1200 ADCO 3-VESSEL FILTRATION UNIT
SPECIFICATIONS Filter Level 1 Micron Filter Media Paper Wafer (non-consumable) Filter Area 211 sq.ft. Clean Oil Flow Rate 75 - 90 GPM (±10%) Shop Air Pressure Required 12 - 15 CFM @ 40 PSI (Clean/Dry) Dimensio
ChipBLASTER EV-2000, 1,900 PSIG, 3-13 GPM, 48 Gallon Tank, 10 HP, 1998
New - 1998 Serial No. 1774 SPECIFICATIONS: Pressure - Maximum...............................................1,900 PSIG Flow.............................................................3 - 13 GPM Coolant Tank Volum
PRAB “E” SERIES CONTINUOUS CHIP PROCESSING SYSTEM
SPECIFICATIONS Material Rate (Steel & Cast Iron) 450 lbs/hr Wringer Drive 7.5 HP Parts Separator Drive 1/3 HP Part Separator Blower 1 ½ HP Shredder Drive 7.5 HP Wringer Bowl Diameter 16 inches Dump Size 7
OBERLIN MODEL OPF-7 AUTOMATIC PRESSURE FILTRATION SYSTEM
SPECIFICATIONS Flow Rate (Water Based Coolant) 120 gallons Media Area (Accepts Standard Roll Media) 7 sq. ft. Electrics 3/60/480 volt Approximate Dimensions 128”LR x 84”FB x 114”Height EQUIPPED WITH The Oberlin C
9A1A 18 X 10 X 8, Norton 110C Grit Diamond (SMD) Wheel, NIB, (5) Available
The SMD is an armored diamond which is usually used for carbide and steel applications in a 50/50 ratio. The 110 grit is on the course end of the spectrum for a super abrasive and should give a finish of around 32RA. T
Barrett Model 1100E Automatic Carrier Type Centrifugal Oil Extractor
EQUIPPED WITH: Updated Controls For Start/Open And Stop/Fault. Electrical Control Cabinet For Stop Defector/Brake And Timer. (5) Removable Baskets With Dollies. Cover With Lifting Hooks. Lid Safety Interlock. SPECIFI
  • Basket diameter: 30"
    Hydraulic Systems, P/N 213981, 22 GPM, 650 PSI, Dual Pump, Rosedale Filter
    New - 2010 Serial No. HU3500190-6-60 SPECIFICATIONS: Pressure - Maximum..................................................650 PSI Flow.................................................................22 GPM Filtrati
    ChipBLASTER J-20, 2,000 PSI, 5 GPM, 100 Gal Tank, 5-Ind. Outlets
    Superceded by ChipBLASTER Model SD30-70-8 w/380L Tank New - 2011 (2) Available SPECIFICATIONS: Pressure - Maximum................................................2,000 PSI Flow - Maximum..........................
    No. BHK 4105, Associated Environmental Systems, -85 deg. to 356 deg.
    Serial No. 4754 SPECIFICATIONS: Volume Temperature Rise Time Pull Down Time Full Load Amps Voltage Dimensions - Interior Dimensions - Exterior EQUIPPED WITH: Controller Sensors *Preliminary Specificati
    Related Subcategories:
    Categories:
    Condition:
    Location:
    • X Illinois (9)
    Price:
    •  to 
    1