Photo: |
Machine Detail: |
Manufacturer: |
Price: |
| Eitel Model RP-25 Straightening Press SPECIFICATIONS:
Maximum Straightening Pressure 27.5 Ton
Straightening Bed 54”L x 10.75”D x 14”H
Ram Speed Up 255 IPM
Ram Speed Down 115 IPM
Total | EITEL RP-25 | $RFQ
Lake Bluff, IL United States |
| 2000° F Barnstead (Thermo Scientific) F30420C Muffle Furnace SPECIFICATIONS:
Max Temperature 1093° C (1999.4°)
Volume 1.6 co ft (45L)
Outside Dimensions 21.5” x 29.5” x 25.5”
Inside Dimensions 14” | Barnstead F30420C | $RFQ
Lake Bluff, IL United States |
| Oberlin Model OPF-7 Automatic Pressure Filtration System SPECIFICATIONS:
Flow Rate (Water Based Coolant) 120 Gallons
Media Area (Accepts Standard Roll Media) 7 sq. ft.
Approximate Dimensions (Without Stai | OBERLIN OPF-7 | $RFQ
Lake Bluff, IL United States |
| 20 Ton Hansford Model 1020 Portable Die Handler SPECIFICATIONS:
Maximum Die Try-Out Force 20 Ton
Shut Height 8”
Open Height 28”
Travel of Upper Platen 20”
Platen Area Lower 24.5” x 44.5”
Manua | HANSFORD 1020 | $RFQ
Lake Bluff, IL United States |
| 16” x 32” Clausing (Chevalier) CLA1632 3 Axis Hydraulic Surface Grinder SPECIFICATIONS:
Table Size 15 ¾” x 31 ½” (400x800mm)
Max. Grinding Length (Longitudinal) 32” (810mm)
Max. Grinding Width (Crosswise) 16” | CLAUSING CLA1632 | $RFQ
Lake Bluff, IL United States |
| 3/4" X 15" Eldorado Mega Two Spindle M-75-1061 Precision Deep Hol 3/4" X 15" Eldorado Mega Two Spindle M-75-1061 Precision Deep Hole Gun Drill
SPECIFICATIONS:
Drilling Diameter Maximum .75 inches
Drill | ELDORADO-MEGA M-75-1061 | $RFQ
Lake Bluff, IL United States |
| 80 Gallon Crystal Clean Model AL80 Agitating Solvent Type Parts Wash Tank SPECIFICATIONS:
Platform Dimensions 17 ½” x 41 ½” x ½”
Tank Dimensions 27” x 44 ½” x 38”
Load Capacity 250 Lbs.
EQUIPPED WIT | Crystal-Clean AL80 | $RFQ
Lake Bluff, IL United States |
| HAAS Model SL10T CNC Turning Machine SPECIFICATIONS:
Bar Capacity 1.75”
Chuck Size 6”
Spindle Speed 6000 RPM
Spindle Motor 15HP
X-Axis Travel 7.9”
Z-Axis Travel 16”
Rapid Rate, Z-A | HAAS SL10T | $RFQ
Lake Bluff, IL United States |
| 19” x 78” Leblond-Makino Regal Servo-Shift Engine Lathe SPECIFICATIONS:
Swing Over Bed 19-1/4”
Swing Over Cross Slide 12-1/4”
Distance Between Centers 78”
Spindle Speeds (12) 40-1600 RPM
Hole Thru Spin | LEBLOND MAKINO 12E-511 | $RFQ
Lake Bluff, IL United States |
| 1” x 48” Technidrill/Triad Model G148 1.00.15-1CR Counter Rotating Deep 1” x 48” Technidrill/Triad Model G148 1.00.15-1CR Counter Rotating Deep Hole Drill
SPECIFICATIONS:
Drilling Depth, Max. 48” + 6” Clamp
Drilling D | TECHNIDRILL G148 1.00.15-1C | $RFQ
Lake Bluff, IL United States |
| Black Diamond Model BW-95PC Drill Grinder SPECIFICATIONS:
Range 1/16” – ¾”
Meter 1/3 HP, 1 PH, 115 Volt
Approximate Dimension (Including Base) 48” x 40” x 52” HT
Approximate Weight 17 | Balck-Diamond BW-95PC | $RFQ
Lake Bluff, IL United States |
| Brother TC-S2B CNC Drilling and Tapping Center SPECIFICATIONS:
Table Size 12” x 23.6”
Spindle Speed 10-10,000 RPM
Spindle Taper BT30
Spindle Nose to Table Top 6.3” – 16.9”
Spindle Motor 6.7” K | BROTHER TC-S2B | $RFQ
Lake Bluff, IL United States |
| 28-Ton Hannifin Schuler Model OGF-28 Hydraulic Gap Frame Press SPECIFICATIONS:
Maximum Tonnage 28 Tons
Bed Size 24” LR x 20.5” FB
Daylight 30”
Adjustable Stroke 25”
Throat Depth 20”
Cylinder Bore 6”
Ram Dia | Hannifin-Schuler OGF-28 | $RFQ
Lake Bluff, IL United States |
| 8,000 Lbs. (3700 kg) Hubtex Model MSU37 Electric Multidirectional Sideload 8,000 Lbs. (3700 kg) Hubtex Model MSU37 Electric Multidirectional Sideloader
SPECIFICATIONS:
Load Capacity @ 157” Height 8,140 Lbs.
Load Capacity | Hubtex MSU37 | $RFQ
Lake Bluff, IL United States |
| Eitel Model RP-25 Straightening Press SPECIFICATIONS:
Maximum Straightening Pressure 27.5 Ton
Straightening Bed 54”L x 10.75”D x 14”H
Ram Speed Up 255 IPM
Ram Speed Down 115 IPM
Total | EITEL RP-25 | $RFQ
Lake Bluff, IL United States |
| Haas Model VF4SS Vertical Machining Center SPECIFICATIONS:
X-Axis Travel 50” 762mm
Y-Axis Travel 20” 508mm
Z-Axis Travel 25” 635mm
Spindle Speed 12,000 RPM
Spindle Motor 40 HP Vector
Spin | HAAS VF4SS | $RFQ
Lake Bluff, IL United States |
| 20 Ton Hansford Model 1021 Portable Die Handler SPECIFICATIONS:
Maximum Die Try-Out Force 20 Ton
Shut Height 8”
Open Height 28”
Travel of Upper Platen 20”
Platen Area Lower 30” x 64”
Manual Po | HANSFORD 1021 | $RFQ
Lake Bluff, IL United States |
| 14” x 20” HEM Twister Automatic Pivot Style Mitering Production Band Saw SPECIFICATIONS:
Rectangle @ 90° 14” x 20”
Rectangle @ 45° 14” x 15”
Rectangle @ 30° 14” x 10”
Blade Size 15’ x 1-1/4 x .042
Blade | HEM | $RFQ
Lake Bluff, IL United States |
| 12,000 Lb. HTS-120 Pandjiris Headstock and Tailstock Welding Posit SPECIFICATIONS:
Supporting Capacity 12,000 Lbs. Total, 6,000 Lbs. each end at 12” Maximum Overhang from Face of Table
Table Size 48” x 48”
Rotation | PANDJIRIS HTS-120 | $RFQ
Lake Bluff, IL United States |
| Goff Model 1244 Spinner Hanger Blast Machine SPECIFICATIONS:
Number of Blast Wheels 2
Number of Blast Chambers 2
Power Per Blast Wheel 5 HP x 2
Workload Capacity of Hangers 100 Lbs.
Envelop | GOFF 1244 | $RFQ
Lake Bluff, IL United States |
| | | | |