buy & sell, new & used machinery, machine tools & equipment

Miscellaneous Equipment > Plastic, Rubber & Paper Machinery

Plastic, Rubber & Paper Machinery for Sale

126 new & used plastic, rubber & paper machinery items for sale
1 | 2 | 3
Refine: Viewing 1 - 50 of 126 matches
Sort by:
Items Per Page:  20 |  50  |  100
Heated Platen Heat Sealer
$4,895
Heated Platen Heat Sealer
Heated Platen Heat Sealer is a constant heat sealer which means that the upper sealing bar is continuously maintained at a specific temperature. Hundreds of application uses depends on die shape. This heat sealer, rece
100" X 17" PRE THREAD UP TABLE
$RFQ
100" X 17" PRE THREAD UP TABLE
100" X 17" LIFT GATE43" PASS LINE HEIGHTPNUEMATIC LIFT 100" X 30" X 75" T
75 TON SANYU RUBBER INJECTION MOLD PRESS
$RFQ
75 TON SANYU RUBBER INJECTION MOLD PRESS
order 75 MODEL #:  STI-08-75VJSERIAL #:  053013-0172.5 TON CLAMPING
75 TON SANYU RUBBER INJECTION MOLD PRESS
$RFQ
75 TON SANYU RUBBER INJECTION MOLD PRESS
order 75 MODEL #:  STI-08-75VJSERIAL #:  959001-0272.5 TON CLAMPING
75 TON SANYU RUBBER INJECTION MOLD PRESS
$RFQ
75 TON SANYU RUBBER INJECTION MOLD PRESS
order 75 MODEL #:  STI-08-75VJSERIAL #:  959001-0172.5 TON CLAMPING
9 Ton - MCP Model 12/90 HSE Plastic Injection Molder, PLC Control, New 2007
$RFQ
9 Ton - MCP Model 12/90 HSE Plastic Injection Molder, PLC Control, New 2007
Capacity - Tonnage 9 Ton Shot Size 12 gr
Engel e-insert 90 Rotary US
$RFQ
Engel e-insert 90 Rotary US
Reference #43482 Engel e-insert 90 Rotary US CLAMPING UNIT: Clamp Force ....................... 90 US Tons Opening Force ..................... 8.6 US Tons Opening Stroke .................... 13.8" Mold Hei
  • Clamping force: 90T
    2200 lbs Used Extractor “Vac BOX” Garnet Removal System FOR RENT for Waterjet Slurry Clean
    $RFQ
    2200 lbs Used Extractor “Vac BOX” Garnet Removal System FOR RENT for Waterjet Slurry Clean
    Capacity 2200 Lbs Bulk Bag Removal Rate 100 PPM Air-Requirement 15.6 CFM @ 60Psi None
    Rapid 200-36, 14.2" x 8.6" Inlet, Staggered knife rotary, 400 RPM
    $RFQ
    Rapid 200-36, 14.2" x 8.6" Inlet, Staggered knife rotary, 400 RPM
    Serial. 385.500151.10.1 (Order # 40049) New- 2018 (Never Used) Specifications: Rotor Diameter............8" Rotor Type............Staggered ( 3 x 3 ) Rotor Speed............400 RPM Hopper Inlet...........
    24" wide Dallas Thread Table
    $RFQ
    24" wide Dallas Thread Table
    24" WIDE PNEUMATIC LIFT 10' LONG
    20' X 36" PRE THREAD UP TABLE
    $RFQ
    20' X 36" PRE THREAD UP TABLE
    20' LONG36" WIDEPNEUMATIC LIFT20' X 3' X 55" T APROX.1500 LBS APROX.
    120" X 37" COLT THREAD UP TABLE
    $RFQ
    120" X 37" COLT THREAD UP TABLE
    120" LR 37" FB WHEN LIFTEDPNEUMATIC 126" X 30" X 60" T 1500 LBS APROX.
    120" x 37" COLT THREAD UP TABLE
    $RFQ
    120" x 37" COLT THREAD UP TABLE
    120" X 37" COLT THREAD UP TABLE 120" LR37" WIDE WHEN LIFTED PNEUMATIC 126" X 30" X 55" T1500 LBS 
    75 TON SANYU RUBBER INJECTION MOLD PRESS
    $RFQ
    75 TON SANYU RUBBER INJECTION MOLD PRESS
    order 75 MODEL #:  STI-08-75VJSERIAL #:  053014-0172.5 TON CLAMPING
    Ferromatik Milacron Vista Edge LV33 CNC Plastic Injection Molder, 33 Tons
    $RFQ
    Ferromatik Milacron Vista Edge LV33 CNC Plastic Injection Molder, 33 Tons
    FERROMATIK MILACRON VISTA EDGE LV33 CNC INJECTION MOLDER Model Vista Edge LV33, S/N L03A0100009, New 2001 Stock # Q11722 EQUIPPED WITH: Vista Edge Panelware Control. SPECIFICATIONS: Horz/Vert...................
    • Clamping force: 33T
    • Shot size: 1.02Oz
      2019 - Geiss DU U8 Semi-Automatic Vacuum Forming Machine
      $RFQ
      2019 - Geiss DU U8 Semi-Automatic Vacuum Forming Machine
      Max Sheet Size 39.3" x 24" Max Tool Height 11.8" Max Forming Area 37.7" x 22.4" Electrical 277/480, 3 Phase Equipped With: Photocell Control FAST Type Quartz Elements Glass Ceramic Plate
      • Platen width: 3.275'
      • Platen length: 2'
        2011 GODFREY & WING 36" WET VACUUM IMPREGNATION SYSTEM
        $RFQ
        2011 GODFREY & WING 36" WET VACUUM IMPREGNATION SYSTEM
        (1) 36" WET VACUUM VESSEL -- 36" INNER DIAMATER X 36" DEPTH OF TANK -- 24" TRUE WORKING DEPTH WITH BASKET AND SEALANT (1) STAINLESS STEEL WASH AND RINSE MODULE (1) STAINLESS STEEL CURE MODULE WITH
        2000 GODRFEY & WING 40" X 72" WET VACUUM IMPREGNATION SYSTEM
        $RFQ
        2000 GODRFEY & WING 40" X 72" WET VACUUM IMPREGNATION SYSTEM
        (1) 40" ID X 72" DEEP STAINLESS STEEL WET VACUUM VESSEL HINGED COVER WITH AIR CYLINDER CONTROLS INCLUDED CHILLER INCLUDED VACUUM PUMP INCLUDED ON FRAME 98" X 58" EQUIPPED WITH: 40" X 72&
        2000 GODFREY & WING 40" X 80" WET VACUUM IMPREGNATION SYSTEM
        $RFQ
        2000 GODFREY & WING 40" X 80" WET VACUUM IMPREGNATION SYSTEM
        (1) 40" ID X 80" DEEP STAINLESS STEEL VESSEL LIFT-OFF COVER (LIFTING APPARATUS NOT INCLUDED) CONTROLS INCLUDED CHILLER INCLUDED VACUUM PUMP INCLUDED ON STEEL FRAME WITH WOOD SKID 102" X 54" EQ
        28" Table 3HP Spindle Deckel FP2 UNIVERSAL MILL, Horizontal/Vertical Head,Slotting He
        $10,500
        28" Table 3HP Spindle Deckel FP2 UNIVERSAL MILL, Horizontal/Vertical Head,Slotting He
        DECKEL UNIVERSAL HORIZONTAL/VERTICAL MILL MODEL: FP-2,   S/N: 6153            SPECIFICATIONS: NUMBER OF SPINDLE SPEEDS .............. 18 SPINDLE SPEEDS ........
        2001 CHEN HSONG INJECTION MOLDING MACHINE
        $10,000
        2001 CHEN HSONG INJECTION MOLDING MACHINE
        200 TON
        • Clamping force: 200T
          5HP Motor Granutec TFG 810-5 PLASTIC GRANULATOR, w/Hopper
          $4,850
          5HP Motor Granutec TFG 810-5 PLASTIC GRANULATOR, w/Hopper
          GRANUTEC MODEL: TFG.810 5HP BESIDE THE PRESS GRANULATOR S/N:189.924   SPECIFICATIONS: Max Throughput 200 lbs/hr Cutting Chamber 8" x 10" Rotor Knives 3 knives Shipping Weight 900 lbs FOR MORE INF
          100 Lbs Hr Conair D01A8201310 PLASTIC DRYER, 100 #, 208 volt
          $2,950
          100 Lbs Hr Conair D01A8201310 PLASTIC DRYER, 100 #, 208 volt
          CONAIR, COMPU-DRY PLASTICS DRYER MODEL:D01A8201310, S/N:6D1588 NEW 1988 VOLTAGE .................................. 208/3/60 REGENERATION .............................
          51" Table 6HP Spindle Hermes 306 UNIVERSAL MILL, Swiveling Tbl,Arbor Support,#40 Tape
          $3,500
          51" Table 6HP Spindle Hermes 306 UNIVERSAL MILL, Swiveling Tbl,Arbor Support,#40 Tape
          HERMES - DORMAC UNIVERSAL HORIZONTAL MILLING MACHINE MODEL: 306,  S/N: 2637,  MFG: 1960's   SPECIFICATIONS: TABLE WORKING SURFACE ................ 12" X 51" TABLE SWIVEL ...................
          HAITIAN INJECTION MOLDING PRESS
          $89,500
          HAITIAN INJECTION MOLDING PRESS
          259 TON, 11 OZ, SIGMATEK CNC CONTROL, 36.6" X 34.6" PLATEN,MADE IN KOREA
          • Clamping force: 259T
          • Shot size: 11Oz
            BIG REP ONE V3 NEW LARGE SCALE FFF 3D PRINTER
            $RFQ
            BIG REP ONE V3 NEW LARGE SCALE FFF 3D PRINTER
            BIG REP ONE V3 NEW LARGE SCALE FFF 3D PRINTER MANUFACTURED STOCK# 71519 BIG REP ONE V3 IS THE RECIPIENT OF THE 2016 GERMAN DESIGN AWARD. TO ACHIEVE THE BEST POSSIBLE CONDITIONS FOR PRINTING LARGE OBJECTS, A
            Dukane #220 plastic press/thruster system
            $6,995
            Dukane #220 plastic press/thruster system
            Year: 1996 Make: Dukane Model: 220 Condition: Good Electrical: 110/220/1Ph Machine Status: Can be powered up Shipping Info: We can load Weight: Dimension: L x W x H 24" x 25"x 60" Machine Loc
            Sandretto 1600-380 (2001)
            $RFQ
            Sandretto 1600-380 (2001)
            SPECIFICATIONS: 1600 TON, 380 OZ. SANDRETTO INJECTION MOLDING MACHINE YEAR: 2001 PLATEN SIZE 100.00" x 92.00" DISTANCE BETWEEN TIE BARS 71.00" x 63.00" MIN/MAX MOLD THICKNESS 27.30" - 62.40" MOV
            • Clamping force: 380T
              220-TON 23.8 OZ SUMITOMO MODEL SH220C INJECTION MOLDING MACHINE (1999)
              $RFQ
              220-TON 23.8 OZ SUMITOMO MODEL SH220C INJECTION MOLDING MACHINE (1999)
              220-TON 23.8 OZ SUMITOMO MODEL SH220C INJECTION MOLDING MACHINE (1999)
              Rapid 2436-C Series Grinder
              $RFQ
              Rapid 2436-C Series Grinder
              Throat Size 24 in. x 36 in. Calmount Control Panel Cat. # KIM43035-3 35 KVAR 480 Volts 3 Phase 60 Hz. Motor: Automotive Industry (High Efficiency Motor Series) 3 Phase 125TE HP 1
              85 Ton Niigata Vertical Injection Molding Machine (1993)
              $RFQ
              85 Ton Niigata Vertical Injection Molding Machine (1993)
              Control: NED 75-VR Sizeshot: 4.5 Tonnage 85 Ton Shot Size 4.5 oz Daylight 18.5" Mold Opening Stroke 9.8" Min Mold Height 8.7" Equipped with: Rotary Table Diameter 47.5"
              • Clamping force: 85T
              • Clamping force: 85T
              • Clamping force: 85T
                Cumberland Model 28 Granulator, 75 HP. (Rebuilt 2013)
                $RFQ
                Cumberland Model 28 Granulator, 75 HP. (Rebuilt 2013)
                SPECIFICATIONS: Screen Hole Size: 3/8" Motor HP: 75 Model: 28-Gran 3KN Feed Throat Opening 18"-28" Rotor Type- High Shear, Open Rotor Rotor Knives- (3) Bed Knives- (2) Discharge outlet- 6" In-Feed Hight-
                • Motor: 75HP
                  Cumberland Model 1628X Granulator NEW
                  $RFQ
                  Cumberland Model 1628X Granulator NEW
                  Machine is designed to grind plastic down to pellets as to reuse in Injection Molding Machines. SPECIFICATIONS: Throat size 16" x 28" Cutting Circle Diameter 16.5" Infeed: Side Feed Hopper Cutting Changer: main
                  715 Ton Borche Injection Mold Machine (2015)
                  $RFQ
                  715 Ton Borche Injection Mold Machine (2015)
                  Specifications: ​Shot Size 75.1/95.1/117.3 oz. ​Tie Bar Spacing 36.61" x 35.43" Platen Size 52.75" x 51.57" Daylight 68.89" Clamp Stroke 34.64" Mold Thickness 11.81" / 34.25" ​Equipped With: CE Standard KEBA 258
                  • Clamping force: 715T
                    330 Ton Cincinnati Electric Mold Machine (2001)
                    $RFQ
                    330 Ton Cincinnati Electric Mold Machine (2001)
                    ​Specifications: ​Shot Size 34 oz. ​Tie Bar Spacing 27.6" x 27.6" Platen Size 40.55" x 40.55" Daylight 50" Clamp Stroke 23.62" Mold Thickness 7.9" / 26.4" ​Equipped With: ​Xtreem Control Hours - 43,595
                    • Clamping force: 330T
                      60"x40" AAA Vacuum Form Machine MB-3660A
                      $6,000
                      60"x40" AAA Vacuum Form Machine MB-3660A
                      60"x40" Vacuum Form Machine with programable Controller. Model MB-3660A 480 Volt Ceramic heaters Very nice machine to make all kinds of parts. Was used to make airplane floor and wall panels.
                      Niro PMA-300 300 Liter 10 Hp Granulator
                      $35,000
                      Niro PMA-300 300 Liter 10 Hp Granulator
                      One (1) used 300 liter Niro Fielder high shear mixer, model PMA 300, stainless steel construction, on stainless steel base with 10 hp chopper.
                      Niro PMA-1200 High Shear Mixer Granulator
                      $175,000
                      Niro PMA-1200 High Shear Mixer Granulator
                      One (1) used Niro Fielder high shear granulating mixer, model PMA-1200, 316 stainless steel construction, 50 kw dc main impeller, 0-140 rpm, 22/15 kw dc chopper, 3600/1800 rpm, jacketed bowl rated 2 bar at 80 C, 460 volt
                      Fukae Powtec EPC High Shear Granulator,
                      $15,500
                      Fukae Powtec EPC High Shear Granulator,
                      One used Fukae Powtec Pilot Size Portable Stainless Steel Vertical High Shear Granulator, Model EPC
                      Vector CF 360 EX Granulator
                      $18,000
                      Vector CF 360 EX Granulator
                      One used Vector CF360 Centrifugal Granulator, built 1988, 220 volt, 3 phase, 60 hz, capacity is 3-5 KG, explosion-proof
                      T.K. FIELDER/NIRO 1200 LITER JACKETED HIGH SHEAR MIXER
                      $275,000
                      T.K. FIELDER/NIRO 1200 LITER JACKETED HIGH SHEAR MIXER
                      One complete 1200 liter TK Fielder/Niro Pharma Systems Mixer/Granulator/Dryer Installation including: ONE (1) Model SP1200 Mixer, with microwave heat source, bowl jacketed for 70 PSI, 0-140 RPM rotor speed, chopper blade
                      ROSS 10 H.P. EMULSIFIER
                      $6,500
                      ROSS 10 H.P. EMULSIFIER
                      ONE USED ROSS IN-LINE EMULSIFIER, MODEL ME-10, WITH S.S. CONSTRUCTION, 10 H.P. MOTOR, 3.5" DIAMETER ROTOR/ STATOR, 4 BLADED ROTOR AND 28" SHAFT.
                      ZANCHETTA 2000 LITER HIGH SHEAR MIXER
                      $199,500
                      ZANCHETTA 2000 LITER HIGH SHEAR MIXER
                      ONE USED ZANCHETTA ROTO GRANULATING MIXER, MODEL ROTO 2000G, 2000 LITER CAPACITY, ALL SANITARY STAINLESS CONSTRUCTION, VARIABLE SPEED HYDRAULIC DRIVE, TELE- SCOPING HIGH SPEED CHOPPER, STANDARD PADDLE STYLE GR
                      T.K. FIELDER PMA50 LITER HIGH SHEAR GRANULATOR
                      $27,500
                      T.K. FIELDER PMA50 LITER HIGH SHEAR GRANULATOR
                      ONE USED T.K. FIELDER HIGH SHEAR MIXER/GRANULATOR, MODEL PMA50, WITH 50 LITER CAPACITY, BUILT 1983, WITH 3480/1760 RPM MOTOR.
                      Lodige
                      $RFQ
                      Lodige
                      Lodige
                      Collette GRAL 400 liter High Shear Mixer
                      $95,000
                      Collette GRAL 400 liter High Shear Mixer
                      One used Collette High Shear Granulating Mixer, Model Gral 400, 400 liter capactiy, stainless steel construction, with 960 MM diameter X 600 MM deep bowl with pneumatically operated plug valve discharge, with bowl lifter
                      Aeromatic-Fielder GP65SP Hi-shear Mixer/Granulator
                      $65,000
                      Aeromatic-Fielder GP65SP Hi-shear Mixer/Granulator
                      One used Aeromatic-Fielder GP65SP High Intensity Mixer/Granulator, Serial 875200, 65 liter bowl capacity w/ microwave dryer (rated for solvent use), with Stevenson CA317 Blower, Meto PHB 191-B Controller w/ Allen-Bradley
                      Bohle GMA70 Mixer
                      $149,500
                      Bohle GMA70 Mixer
                      One used Bohle high shear vacuum mixer, model GMA 70 EX stainless steel construction, 70 liter bowl with air handling, H & P vector controls, internal video system, chilled water system, hot water boiler and Varovac 3250
                      Collette Gral 25 Pro Vacuum Mixer/Granulator/Dryer w/ Solvent Recovery
                      $45,000
                      Collette Gral 25 Pro Vacuum Mixer/Granulator/Dryer w/ Solvent Recovery
                      One used Collette Gral 25 Pro Vacuum Mixer/Granulator/Dryer w/ Solvent Recovery, with manuals. Five h.p. mixer motor, 2/1 h.p. chopper motor, jacketed bowl, 460/60/3
                      Niro-Fielder SP 1 Mixer
                      $38,000
                      Niro-Fielder SP 1 Mixer
                      One used Niro-Fielder SP 1 High-shear Mixer with 10 and 20 liter jacketed interchageable bowls, jacket pressure is 2 bars, impeller speed 0-1500 rpm, chopper 1000-3000 rpm, built 1993, microwave
                      Related Subcategories:
                      Categories:
                      Condition:
                      Manufacturer:
                      Location:
                      Price:
                      •  to 
                      1 | 2 | 3