Machine Tools > Millers & Milling Machines > Vertical Millers    < Back

No. E-Mill-3VS, ACER, Toshiba Drive, 3 HP, 9" X 42" table - $RFQ

Item Number: #00073860
No. E-Mill-3VS, ACER, Toshiba Drive, 3 HP, 9&#034; X 42&#034; table
 
   


No. E-Mill-3VS, ACER, Toshiba Drive, 3 HP, 9" X 42" table
 
Stock Code:  6320
Price: $RFQ
Subcategory: 

Vertical Millers

Manufacturer:  Toshiba
Condition: Used
 
OPTIONAL ACCESSORIES:
NEWALL DP700 2 axis digital readout (installed) . . . . . . . . . . $ 1,920.00
NEWALL DP700 3 axis digital readout (installed) . . . . . . . . . . 2,535.00
MITUTOYO digimatiatic quill kit (LED readout forfor spindle). . . . 400.00
SERVO 150 lb power feed unit, longitudinal (installed). . . . . . . 1,250.00
DYNAMO model AL250 150 lb power feed unit, longitudinal (installed) 750.00
SERVO 150 lb power feed unit, cross (installed) . . . . . . . . . . 1,280.00
DYNAMO model AL250 150 lb power feed unit, cross (installed). . . . 750.00
SERVO 140 lb power feed unit, knee vertical (installed) . . . . . . 1,250.00
DYNAMO model AL250 150 lb power feed unit, knee vert (installed). . 750.00
12" rotary table (vertical & horizontal). . . . . . . . . . . . . . 950.00
Coolant system (installed). . . . . . . . . . . . . . . . . . . . . 720.00
Chip pan (49" x 30" x 7.5") . . . . . . . . . . . . . . . . . . . . 350.00
Clamping kit (52 piece) . . . . . . . . . . . . . . . . . . . . . . 150.00
R-8 collet set (11 piece, 1/8" to 3/4") . . . . . . . . . . . . . . 200.00
6" angle-lock milling vise. . . . . . . . . . . . . . . . . . . . . 450.00
Swivel base for 6" vise . . . . . . . . . . . . . . . . . . . . . . 175.00
Horizontal milling attachment (not installed) . . . . . . . . . . . 1,100.00
Automatic air power draw bar (not installed). . . . . . . . . . . . 825.00
T-slot cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.00
6" riser block. . . . . . . . . . . . . . . . . . . . . . . . . . . 720.00
8" riser block. . . . . . . . . . . . . . . . . . . . . . . . . . . 805.00

ELECTRICS: 220/440 volt, 3 phase, 60 Hz. (can run single phase)
DELIVERY: From stock, F.O.B. New Jersey, inland freight . . . . . . 1,200.00


STANDARD ACCESSORIES:
ISO-9002 compliant, 3 HP inverter control varaible speed (Toshiba)
Licensed Meehanite casting, Gear housing made of cast iron
Precision hardened & ground square ways--Y & Z axes
Hardened and ground leadscrews--X & Y axes, One shot lubrication
Turcite-B on slideways, gibs and saddle slideways--X & Y axes
Spindle is made of SCM415 (SAE4115) chrome molybdenum alloy steel,
fully hardened and ground.
Rigid design of spindle automatic feed mechanism
Thrust bearing support on lead screws
Strict hand scraping (16 points per square inch)
One year parts warranty (one year for consumables: ie motor, brake
shoes, springs, belts, bearings, electrical parts, pulleys, etc.)
Tool box, Way covers, One draw bar
Leveling pads, Parts and operation manual

SPECIFICATIONS:
Size of table (length x width) 9" x 49" (225mm x 1225mm)
Hardened & ground ways yes
Longitudinal travel 34" (850mm)
Cross travel 12" (300mm)
Ram traverse 12" (300mm)
Vertical knee travel 16" (400mm)
Quill traverse 5" (127mm)
Quill power feed rd rate--number 3
--range (ipr) .0015/.003/.006
Spindle taper R-8
Main motor 3 HP
Head moves right to left 90 degrees
Head tilts front to back 45 degrees
Spindle speeds--number infinitely variable
--range 60-500-4500 rpm
Net weight (approx.) 2,380 lbs. (1081 kgs)
Dimensions (L x W x H) 84" x 70" x 90"
(2120mm x 1790mm x 2262mm)
 
This machine is listed for sale by A M Metalmaq located in Hialeah, Florida
 
Contact the Seller
 
A M Metalmaq
  320 E. 10th Ct
Hialeah
FL 33010
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details