Machine Tools > Rolling Mills & Ring Formers > Sendzimir Rolling Mills    < Back

25" (635mm) WATERBURY FARREL ZR 23-25 SENDZIMIR MILL w/AGC - $RFQ

Item Number: #00072200
25&#034; (635mm) WATERBURY FARREL ZR 23-25 SENDZIMIR MILL w/AGC
 
 
 


25" (635mm) WATERBURY FARREL ZR 23-25 SENDZIMIR MILL w/AGC
 
Stock Code:  112084
Price: $RFQ
Subcategory: 

Sendzimir Rolling Mills

Manufacturer:  -Waterbury-Farrel-Foundry-Machine-Usa
Model:  ZR 23SC-25
Condition: Used
 
SPECIFICATIONS:

MANUFACTURER: WATERBURY FARREL FOUNDRY & MACHINE (USA)
TYPE: 20-HI PRECISION COLD REVERSING ROLLING MILL

WITH AGC (AUTOMATIC GAUGE CONTROL)

MODEL No.: ZR 23SC-25
MAXIMUM INCOMING THICKNESS: 0.140" (3.56mm)
MINIMUM FINISH THICKNESS: 0.0025" (0.0635mm)
MAXIMUM COIL WEIGHT: 15,000 LBS. (6,800 KG)
SPEED RANGE: 0-1000 FPM (O-305m/Min.)
MAXIMUM TENSION: 20,000 LBS. (9,071 KG)
AUTOMATIC GAUGE CONTROL SYSTEM: NEW 2001
TYPE: MASS FLOW
THICKNESS GAUGES: VOLLMER 0199/P90/9189
READOUTS: 1 x VMF 3/90
1 x VMF 2000
NOMINAL WORK ROLL DIAMETER: 2.42" (61.46MM)
BACKING BEARING DIAMETER: 8.858" (225mm)

OIL MIST LUBRICATION SYSTEM ON BILLY ROLLS AND WIPERS
ROLL WIPERS ON ENTRY AND EXIT SIDES

PRESSURE BOARD: UP TO 1000 psi
HCS POSITIONING SYSTEM
NEW (PARTIAL) UPGRADE TO SCR D.C. ELECTRICAL DRIVE SYSTEM INSTALLED 2008

THE MILL CONSISTS OF:
PAYOFF:
TYPE: PYRAMID EXPANDING MANDREL
YEAR OF MANUFACTURER: 2001
MANDREL I.D. RANGE: 19 1/2"- 20" (495mm - 508mm)
MANDREL WIDTH: 26" (660mm)
TYPE EXPANSION: HYDRAULIC
SLIDING BASE
MAXIMUM COIL WEIGHT: 15,000 LBS. (6800 KG)
COIL SNUBBER HOLDDOWN: HYDRAULIC
PAPER UNWINDER
6 COIL ENTRY WAITING STATION
COIL CAR
DRIVE MOTOR: 75 HP,400/1600 RPM, 600 VOLTS,
120 AMPS, G.E. D.C. VARIABLE SPEED
GEARBOX: HORSBURGH & SCOTT 400/1600 RPM,
RATIO 1.2 TO 1
LEFT AND RIGHT WINDERS:
REVERSE PYRAMID WINDERS
MANDREL DIAMETER: 19 1/2"- 20" (495mm - 508mm)
MANDREL FACE: 30" (762mm)
USES SOLID BLOCK CORES
COIL PUSH-OFF: HYDRAULIC
COIL CAR
RIGHT COIL WINDER REBUILT IN 2010
DRIVE MOTOR: 2 x 250 HP, 240 VOLT D.C., 500/1440 RPM

RELIANCE VARIABLE SPEED W/SCR CONTROLS

UPGRADED IN 2008

MAIN MILL:
ROLL WIPERS BOTH SIDES: 400 psi
PRESSURE BOARD: 1000 psi
OIL MIST COOLANT SYSTEM
VOLLMER GAUGES BOTH SIDES
AUTOMATIC GAUGE CONTROL SYSTEM: MASS FLOW
LARGE INVENTORY OF SPARE ROLLS, BACKUPS, ETC.

DRIVE MOTOR: 600 HP, 300-750 RPM, 1050 AMPS,
RELIANCE WITH SCR CONTROLS
UPGRADED IN 2008

INCLUDES THREE (3) SETS OF BACKUP BEARINGS

INCLUDES A HUGE INVENTORY OF WORK ROLLS AND PARTS

INCLUDES ALL LUBRICATION TANKS, PUMPS, PIPING, SPARES, DRAWINGS,

CONTROLS, OPERATOR STATIONS, FUME EXHAUST SYSTEM AND SOLID BLOCKS

MILL IS STILL INSTALLED AND CEASED OPERATION IN 2013
 
This machine is listed for sale by National Machinery Exchange Inc located in Newark, New Jersey
 
Contact the Seller
 
National Machinery Exchange Inc
  158 Paris Street
Newark
NJ 07105
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details