10" x 40", Kellenberger 1000U, 3-Wheel Design w/Fischer ID Spindl |
|
Stock Code: |
51202 |
Price: | $RFQ |
Subcategory: | Cylindrical Universal Grinders |
Year of Manufacture: |
2004 |
Manufacturer: |
Kellenberger |
Model: |
1000U |
Condition: | Used |
New - 2004
Serial No. 613832
SPECIFICATIONS:
Height of Centers............10"
Table Slide:
- Distance Between Centers............39-3/8"
- Travel - Maximum............51-3/16"
- Traverse Per Revolution of Handwheel (Coarse/Fine)............0.8" / 0.1"
- Traverse per Division of Dial............0.002"
- Traverse Speed - Hydraulic - Infinitely Variable............0.02 - 6 ft/min
- Table Oscillation - Minimum............2.5"
- Dwell Time on Table - Slide Reversal Infinitely Variable............0 - 5 sec.
- Swivel Range............9 °
Wheelslide:
- Travel with Handwheel............8-21/32"
- Infeed per Revolution of Handwheel (Coarse/Fine)............8" / 1" Dia.
- Division of Dial............0.0002" Dia.
- Rapid Advance and Retraction - Hydraulic............1-9/16"
- Hydraulic Infeed............0 - 0.037" Dia.
- Plunge Grinding Infeed Speed............0.00001 - 0.0001" per sec.
- Traverse Grinding Infeed per Table Slide Reversal............0.00004 - 1.18" Dia.
Wheelhead (Universal for OD, ID, and Face Grinding):
- Grinding Wheel for OD Grinding............16" x 2" x 5"
- Grinding Wheel for Face Grinding............12" x 1.5" x 5"
- Wheelhead Motor............5 HP
- Spindle Speeds............1500/1700/2200 RPM
- Wheelhead Swivel Range............+5 / -195°
- Indexed Stop Position............Every 90 °
- Carrier Bore for Internal Grinding Spindles............3-5/32"
Workhead (Siemens A.C. Servo Drive):
- Swivel Range..............................................+120 / -30°
- Spindle Speeds - Infinitely Variable..........................6 - 600 RPM
- Working Capacity Between Centers - Maximum.......................330 Lbs.
- Internal Taper of Work Spindle...................................#5 MORSE
- Motor................................................................4 HP
Tailstock:
- Internal Taper of Sleeve.........................................#4 MORSE
- Sleeve Stroke.....................................................1-3/16"
Electrics.....................................................460V/3PH/60Hz
Floor Space Required - Approximate............106"(L-R) x 64"(F-B) x 66"(H)
Weight - Approximate.............................................6,500 Lbs.
EQUIPPED WITH:
- Fischer Internal Grinding Spindle (42,000 RPM) Model HJN-842, Belt Driven with Guard
- Lateral & Angular Dressing Device
- Swivel Dressing Device
- Sine Bar Attachment (Dial Indicator Not Equipped)
- Permanent Magnetic Chuck (7.87" Ø)
- 3-Jaw Steady Rest (4/32" - 4-23/22")
- 4-Jaw Buck Chuck (8" Ø)
- 3-Jaw Chuck (6.3" Ø)
- Grinding Wheel Flanges
- Chuck Mounting Plate
- (2) Blank Chuck Adapter Plates
- Paper Bed Coolant Filtration System
- Hydraulic Connection for Tailstock
- Ways Lubrication System
- Dresser Mounting Blocks
- Machine Documentation
*Preliminary specifications, pending confirmation.
This machine is listed for sale by Liberty Machinery Company
located in Lincolnshire, Illinois