MACHINE# 13317

SPECIFICATIONS:

MANUFACTURER: LOEWY HYDROPRESS (U.S.A.)
TYPE: OIL HYDRAULIC ALUMINUM EXTRUSION PRESS WITH ALL DOWNSTREAM EQUIPMENT

YEAR REFURBISHED:
2008 - ALL NEW DOWNSTREAM EQUIPMENT INCLUDING PULLER, HOT SAW, RUNOUT,

COOLING BED, STRETCHER, AND FINAL CUTTING SAW.
2014 - BACK SIDE TABLE OVERHAUL.
2016 - MAIN PUMP OVERHAUL.

THE LINE CONSISTS OF:

1. LOEWY HORIZONTAL EXTRUSION PRESS
Hydraulic Cylinder:
Main Ram: 1219mm Dia. x 1,675 stroke (st) (51" x 66")
Side Cylinder: 310mm x 203mm x 1,675 stroke (st) (12" x 66")
Container Cylinder: 280mm x 140mm x 450 stroke (st)
Shear Cylinder: 228mm x 165mm x 1,000 stroke (st)
Die-Slider Cylinder: 140mm x 80mm x 1,900 stroke (st)

Hydraulic Cylinder Power:
Main Ram
- Area: 11,670cm2
- Pressure: 240 kgf/cm2
- Power: 2,800 ton

Side Cylinder
- Bore: 754.5 x 2=1,509cm2
- Rod: 323.5 x 2=647cm2
Advance Area: 1,509cm2

- Pressure: 240 kgf/cm2
- Power: 362 ton
Return Area: 862cm2
- Pressure: 240 kgf/cm2
- Power: 207 ton

Container Cylinder
- Bore: 615.5 x 2=1,231cm2
- Rod: 154cm2 x 2=308cm2
Open Area: 1,231cm2
- Pressure: 240 kgf/cm2
- Power: 295 ton
Close Area: 923cm2
- Pressure: 240 kgf/cm2
- Power: 221 ton
Sealing Area: 923cm2
- Pressure: 210 kgf/cm2
- Power: 193 ton

Shear Cylinder
Bore: 408cm2
Rod: 214cm2
Down Area: 408cm2
- Pressure: 240 kgf/cm2
- Power: 98 ton
Lifting Area: 194cm2
- Pressure: 240 kgf/cm2
- Power: 46 ton

Billet Size: 228mm x 750mm (9" x 29.5")

Die - Stack: 460mm x 460mm (18" x 18")

Oil Tank Size: 12,000 Liters (3,170 gal.)

Motors:
250 Hp: 1 set
200 Hp: 3 set
150 Hp: 1 set
75 Hp: 1 set
20 Hp: 1 set
7.5 Hp: 1 set

Container Heaters:
60 kw: 1 set

Machine Size:
W 8250mm x H 5150mm x L 11,500mm (27 Ft. x 16.8 Ft. x 37.5 Ft.)

2. BILLET INDUCTION HEATER
Type: INDUCTION
Size: 228mm x 1500mm (9" x 59")
Transformer section: 3 zone
Main voltage: 4160V

3. PULLER
Main voltage: 440V 60Hz
Type: Double puller
P1 motor: 19kw DC, 25HP
P2 motor: 19kw DC, 25HP

4. WATER QUENCHING DEVICE
TYPE: DEEP QUENCHING & SPRAY QUENCHING
SIZE: 700mm x 3000mm (27" x 118")
ROLLER PITCH: 550mm
ROLLER SIZE: 110mm x 420mm

5. MOVABLE HOT SAW
SAW BLADE: 750mm x 110 - 120 tooth (29.5" Diameter)
SAW CUTTING SIZE: 250mm
SAW DRIVE MOTOR: 5.5kw 7.5HP

6. RUN-OUT TABLE
TYPE: FREE ROLLER
TABLE SIZE: 600mm x 915mm x 15,000mm (23.5"x 36"x 49 Ft.)
ROLLER PITCH: 500mm
ROLLER SIZE: 110mm x 450mm

7. TRANSFER CONVEYOR
TYPE: CONVEYOR BELT
TABLE SIZE: 1425mm x 895mm x 37,200mm
BELT PITCH: 1200mm
BELT SIZE: 100mm x 10T

8. COOLING TABLE
TYPE: CONVEYOR BELT
TABLE SIZE: 2955mm x 855mm x 38,400mm (116"x 33"x 125 Ft.)


BELT PITCH: 1,200mm
BELT SIZE: 100 x 10T

9. STRETCHER
TYPE: VERTICAL TYPE
JAW DIMENSION: 300mm (11.8")

10. STORAGE TABLE
TYPE: CONVEYOR BELT
TABLE SIZE: 2010mm x 865mm x 38,400mm
BELT PITCH: 1200mm
BELT SIZE: 100mm x 10T

11. SAW CHARGE TABLE
TYPE: CHAIN DRIVE TYPE
TABLE SIZE: 900mm x 885mm x 39,600mm
ROLLER PITCH: 600mm
ROLLER SIZE: 110mm x 10T x 790mm

12. FINAL CUTTING SAW
SAW BLADE: 650mm x 80 - 100 tooth
SAW CUTTING SIZE: 650mm (25.6")
SAW DRIVE MOTOR: 5.5kw 7.5HP

13. INSPECTION TABLE
TYPE: FREE ROLLER, CONVEYOR BELT
SIZE: 2100mm x 14,300mm
ROLLER PITCH: 300mm
ROLLER SIZE: 110mm x 800mm
BELT PITCH: 1300mm
BELT SIZE: 75mm x 10T

14. COOLING FAN
QUANTITY: 101 EA.

15. FACILITY INSTALLATION HISTORY
Electrical and facility overhaul in 2008
Back side table overhaul in 2014
Extrusion machine main pump overhaul in 2016

16. SPARE PART
DUMMY: 2 EA.
STEM: 1 EA.
CONTAINER: 1 EA.
BILLET INDUCTION COIL: 8" (203mm) x 3 EA.

** SPECIFICATIONS SUBJECT TO REVISIONS **

** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **

** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **

This machine is listed for sale by Machinery International Corp located in Woodbridge, Connecticut