CAPACITY
HORIZONTAL: 18"
VERTICAL: 22"
VERTICAL @ 45°: 12-1/2"
SPEED RANGE (INF. VARIABLE): 50 – 450 FPM
FEED FORCE: 0 – 140 LBS
BLADE DIMENSIONS: 14'6" L X 1" W X .035" THICK
WHEEL DIAMETER: 18"
TEE SLOTS: 4
WORKING SURFACE: 24.15" X 33"
TABLE HEIGHT: 34 1/2" W/O LEVELING SCREWS
MAXIMUM VISE OPENING: 21"
VISE HEIGHT: 6"
MAIN MOTOR: 2 HP
COOLANT PUMP MOTOR: 1/4 HP
COOLANT CAPACITY: 20 GALLONS

GENERAL
OVERALL DIMENSIONS: 90" L X 79" W X 85" H
DOMESTIC SHIPPING WEIGHT: 2,870 LBS
ELECTRICS: 440 V, 3 PH, 60 CYC


EQUIPPED WITH
FRONT MOUNTED SPEED CONTROL ALLOWS BLADE SPEED TO BE ADJUSTED
FROM OPERATOR'S CONTROL STATION.
MITER CUTTING: COLUMN AND BLADE TILT UP TO 45 DEGREES RIGHT AND
LEFT OF VERTICAL; WORK ALWAYS STATIONARY. BUILT-IN PROTRACTOR.
QUICK-ACTION VISE: MAXIMUM OPENING 20". JAWS CAN BE SHIFTED TO
EITHER RIGHT OR LEFT SIDE OF BLADE. JAWS ARE 6" HIGH, 12" WIDE.
AUTOMATIC STOPS: ADJUSTABLE STOPS CAN BE PRE-SET TO STOP
ADVANCE AND RETURN OF BLADE, AND ALSO TO STOP MOTOR AT ANY
LOCATION WITHIN THE 18" TRAVEL OF THE BLADE.
FLUSHING HOSE: WASHES CHIPS FROM HARD TO GET AT PLACES REDUCING
CLEAN-UP TIME.
POWER CHIP BRUSH: TOGETHER WITH BLADE WIPERS AND FLOOD COOLANT
KEEP BLADE TEETH FREE OF CHIPS.
CARBIDE GUIDE SYSTEM: GUIDES ARE STATIONARY AND CAN BE RADIALLY
ADJUSTED TO PRESENT NEW GUIDING SURFACE TO THE BLADE. UPPER
AND LOWER GUIDES HAVE PRELOADED CARBIDE FACED BACK-UP BLOCKS
TO SUPPORT BACK EDGE OF BLADE.

This machine is listed for sale by located in Bethlehem, Pennsylvania