CALL FOR BEST PRICE!

9" x 42" - 50" SHARP® CNC Vertical Knee Mills with AcuRite 3-Axis 3500i Control

FEATURES:
CNC control by Acu-Rite and FAGOR for 2 axes and 3 axes. The 3rd axis is on the quill. Conversational programming allow easy operation of the machine without using G code.
ISO 9002 Certified: Quality Up To World Industry Standards.
Meehanite Casting: Highest Grade Of Casting Possible.
A Pair Of High Out-Put Fans: Keeps Head And 3-Hp Motor Cool, To Run Jobs For Extended Periods Without Damaging The Motor, Belts And Bearing.
A Pair Of Precision ABEC-7 Angular Contact Bearings To Support Spindle. The Quill Is Ground And Chromed To Fit The Housing: This Insures A Spindle Runout Of .0002” T.I.R.
Motor Shaft And Varidrive Pulleys Are Dynamically Balanced, Then Chromed For A Flawless Fit, Ground Ribs On Inside Diameter: For Smooth Speed Changes.
Motor Shaft Has An Oil Channel In The Center That Is Fed By A Grease Fitting On The Lower End: To Keep Vari-Drive Pulley Moving Smoothly On The Shaft.
This LMV-50 Mill Uses A Roller Bearing For The Lower Support Of The Shaft: It Ensures Proper Loading, Support And Alignment It Also Prevents The Shaft From Being Distorted By The Tension Of The Belt: For Quiet, Accurate Operation At Any Speed For Years And Years.
One Shot Lubrication System: For Lubrication Of Ways And Lead Screws.
(X,Y And Z-Axis)
Hand Scraped Saddle And Knee: For Better Oil Retention. It Avoids Having Chips And Dirt Embed In The Knee And Damage The Sliding Surface.
Oil Groove Are Milled: For Maximum Lubrication On All Wear Areas.
Table And Saddle Backlash Is Controlled By Double Nut Design: Keeps Lead Screw In Contact With Bronze Nuts An All Times To Keep Backlash At .0008” Within 20”.
Table And Saddle Are Mounted With Thrust Bearings That Are Pre Loaded: Eliminating Endplay For Precisely Controlled Lateral Movement.
Patient Knuckle Design Uses 6 Bolt 3 Per Side, Securing Them From The Outside:This Method Locks The Head Securely Resulting In Better Accuracy And Performance.
Ways Are Hard Chrome Dovetail On Saddle And Column.
"Bridgeport-type" mill

STANDARD EQUIPMENT:
AcuRite 3 Axis 3500i control
Hard-Crome Ways
Rubber Way Covers, Front and Rear
Automatic Lube System
Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, Oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint

SPECIFICATIONS:
TABLE
Working surface
9" x 42" (LMV/3500i)
9” x 50" (LMV-50/3500i)

T-slot number, size: 3, 5/8"

CAPACITY
Travels (X, Y, And Z): 25" (with CNC installed) (LMV/3500i)
Table travel; x-axis: 32” (with CNC Installed) (LMV-50/3500i)
Saddle travel; y-axis: 11" (LMV-50/3500i)

Ram Travel
11" (LMV/3500i)
12" (LMV-50/3500i)

Quill travel (Z-axis): 5" (LMV-50/3500i)
Knee travel: 16"
Spindle to column (min-max): 6 3/4" - 18 1/2"
Spindle to nose to table (min-max): 2 1/8” - 18"

SPINDLE
Motor: 3 HP
Wiring voltage: 220/440v, 3 phase, 60 Hz (LMV-50/3500i)
Taper: R-8
Speed (vari-speed): 60-4,500 RPM
Quill feed (IPR): 0.0015”, 0.003”, 0.006"
Head swivel: 360°
Head Tilt (Lt. To Rt): 45° (LMV/3500i)
Head tilt up-and-down (each way): 45°

DIMENSIONS & WEIGHT Floor area (w x d x h)
7’ x 6.5’ x 6.75’ (LMV/3500i)
101" x 64" x 84" (LMV-50/3500i)

Net weight
2,750 lbs. (LMV/3500i)
3,250 lbs. (LMV-50/3500i)

TOTAL POWER CONSUMPTIONS
220V: 3KVA/15 amps

440V:
3KVA/7.5 amps (LMV/3500i)
3KVA/7 (LMV-50/3500i)

OPTIONAL ITEMS:
Remote Start/Stop Switch
Remote Manual Handwheel
Acu-rite Electrical Edge Finder
Acurite D.R.O. System on Knee
DRO System Installation Charge
6” “Kurt” Vise with Swivel Base
Drill Chuck & Drill Arbor
Coolant System with Chip Pan At Base
“Maxi-Torque Rite” Power Draw Bar
Factory Installation Charge – PDB, Each
Clamping Kit (52 pcs/steel rack)
Halogen Work light

OPTIONAL MODELS:
LMV/3500i: 9" x 42"
LMV-50/3500i: 9" x 50"

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida