buy & sell, new & used machinery, machine tools & equipment

 
Machine Tools > Millers & Milling Machines > Knee Millers    < Back

U.S. INDUSTRIAL Heavy Duty Manual Variable Speed Milling Machine Package - $RFQ

Item Number: #00074121
U.S. INDUSTRIAL Heavy Duty Manual Variable Speed Milling Machine Package

U.S. INDUSTRIAL Heavy Duty Manual Variable Speed Milling Machine Package
Stock Code:  3VH-3-KIT
Price: $RFQ
Subcategory: 

Knee Millers

Table width10"
Table length54"
Manufacturer:  U-S-Industrial
Model:  3VH-3-KIT
Condition: New

CALL 386-304-3720 FOR AVAILABILITY

FEATURES:
KIT PACKAGE ONLY:
Large 10” x 54” table with 3 T-slots, 5/8”, on 2.5” centers Table travel is 37.4”. Leadscrew pitch is 5TPI with dials on each end graduated in .001”.
Large knee allows saddle to travel 16.5” for crossfeed with .001” dial graduations
Large knee travel is 16.5” with 10TPI leadscrew, .001” dial graduations
Large ram allows for over 18.5” of travel, inlaid scale, and deep throat for large workpieces
Large SquareWays on Y and Z Axis…………. Double locks on all axis
Aged stressed castings, stress relieved for long life and accuracy, Meehanite type
Power quill feed allows for 0.0018, 0.003, 0.006 Inches of feed per revolution of spindle
Hardened and ground and precisely scraped work table, saddle and knee ways, turcite B coated for wear resistance
Centralized one-shot lubrication pump lubricates all way surfaces and leadscrews
Backlash adjustment for leadscrews, Gib adjustments for ways
Electrical cabinet with internal transformer for 110V and 24V devices, circuit breaker protected, Low Voltage controls, 24 volt halogen machine light. Transformer also includes power supply for digital readout and power table feed.
Operator low voltage controls for coolant pump, machine light, main power with emergency stop button. Spindle off/forward/reverse switch.
Built in coolant tank base with coolant pump, pressure and return hose , nozzle and valve, Installed and ready to use. Base chip pan to help prevent coolant overflow.
Manual variable speed spindle drive, 3 Horsepower runs the spindle from 60 to 4200 RPM. Spindle speed dial on head shows RPM in direct drive and back gear. Spindle motor is finned for cooling.
Sino three axis digital readout has 0.0002” resolution. Readout comes mounted to knee, table and cross and is ready to use. The readout is inch/metric switchable, with absolute incremental function. There is a calculator function, bolt hole pattern function, line pattern function, and arc calculate function. A comprehensive manual is included.
Power table feed is Align model AL500SP. Infinitely variable feed from .8 to 32 IPM with rapid button, on/off switch, and adjustable travel stops. This heavy duty power feed has 150 inch pounds of torque, with max to 650. Power table feed comes installed on machine, ready to use.
Toolbox and tools, manuals, electrical drawing, test certificate all included.

STANDARD EQUIPMENT:
PART# AL500SP: Heavy duty power table feed on X axis
PART# FCKIT: Flood coolant pump, hose, nozzle
PART# CPKIT: Chip pan
PART# MLKIT: Machine light
PART# FRWCKIT: Front and Rear way covers
PART# SINO3AX: Three axis digital readout

SPECIFICATIONS:
Table Size - 3 t-slots, 5/8" on 2.5" centers: 10" x 54"
Table Travel w/ Powerfeed Installed: 34.4"
Cross Travel w/ Readout Installed: 15.5"
Knee Travel: 16.5"
Ram Travel: 18.5"
Quill Travel: 5"
Power quill feed - .0018, .003, .006 IPR: Yes
Head Tilt - Left and Right - With Degree Scale: 90 degrees
Head Tilt - Front and Back - With Degree Scale: 45 degrees
Ram Swivel on Turret - With Degree Scale: 360 degrees
Spindle Taper: R8
Machine Ways, Table, Cross and Knee: Box
Maximum Weight of Workpiece and Fixture: 660 lbs.
Electrical Cabinet with Disconnect & Circuit Breakers: Yes
Spindle Drive: 3 HP
Vari-Speeds Spindle RPM Range: 60 to 4200
Voltage, 3 Phase: 220 or 440 (please specify)
Amp Requirement @ 220 Volts: 15
Includes Schneider Electronic Spindle Drive: No
Includes Manual Variable Speed Spindle: Yes
Includes Heavy Duty Power Table Feed: Yes
Includes Flood Coolant System: Yes
Includes Base Chip Pan: Yes
Includes Machine Light: Yes
Includes Front & Rear Way Covers: Yes
Includes SINO 3-Axis Digital Readout, inch/metric: Yes
100% Inspection, Calibration Prior to Shipping: Yes
Shipping Dimension - L x W x H on skid: 6' x 6' x 80"
Machine Weight: 3,400 lbs.

OPTIONAL ITEMS:
PDB-PB001: Air Power Drawbar, pneumatic, installed
Y150-3V: Bestline Power Feed for Y-axis (cross feed)
Z150-3V: Bestline Power Feed for Z-axis (knee feed)
R8ER32KIT-K: Mill QC collet set, 1 holder R-8 to ER32, 1 spanner for collet nut,
11 ER32 collets from 1/8” to 3/4”, all in form fitted case
CK-K: Clamp kit, 58 piece, bolts, nuts, step blocks, fingers, for fixturing
P100-K: Precision Parallel Set, several matched parallels in form case
6” VISE-K: Milling vise, 6” lock type
R8-SET: R-8 collet set, 11 pieces

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

Contact Seller

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida

Contact the Seller
 
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
 
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Name*:
Email*:
Phone*:
Address (including City, State)*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored
Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details