Machine Tools > Brakes & Folding Machines > Press Brakes    < Back

90 Ton x 78" BAILEIGH® Hydraulic Press Brake - $RFQ

Item Number: #00064699
90 Ton x 78&quot; BAILEIGH&#174; Hydraulic Press Brake

90 Ton x 78" BAILEIGH® Hydraulic Press Brake
Stock Code:  BP-9078 CNC
Price: $RFQ

Press Brakes

Manufacturer:  Baileigh
Model:  BP-9078 CNC
Condition: New

Baileigh’s BP-9078 CNC hydraulic sheet metal press brake is a very rigid 2 axis machine with a heavy frame that is made up of electro welded plate steel. The top beam travels up and down using several 3 axis bearings coupled to a hardened rail system. Hydraulic cylinders are controlled by mechanical stops inside the cylinders assuring accurate angle of bend at all times. An encoder system indicates the exact position of the top beam and adjustments are made on the Delem controller to a servo motor. We use a unique parallel mechanism that provides forced synchronized motions so the top die is parallel to the bottom. The 90 tons of hydraulic pressure can be measured and regulated depending on the application. The back gauge on this hydraulic press brake is controlled by the Delem controller to a servo motor with an encoder for accurate positioning. The Delem controller can be programmed with up to 100 programs, with up to 25 commands per program. There manual finite adjustments to lower or higher the back gauges. There is hydraulic auto crowning compensation so any flexing in the middle of the machine while at full capacity can be adjusted to create crisp bends using the maximum width of the machine. The BP-9078 CNC hydraulic sheet metal press brake is fully decked out making all options standard. This quality sheet metal bender comes standard with inside lighting, a set of multi-vee tooling, Delem controls, auto crowning compensation, a six sensor safety curtain and front material rests.

Maximum Pressure: 90 Tons
Bending Length: 78.75”
Bending Thickness: (PLEASE CALL)
Distance Between Housings: 61”
Distance From Table to Ram: 11.81”
Table Width: 6.29”
Throat Depth (to housing): 7.87”
Stroke Distance: 5.9"
Approach Speed: 3.14” / sec.
Bending Speed: .236” / sec.
Return Speed: 2.36” / sec.
Power Back Gauge Length: 23.62”
NC Control Type: Delem
Main Motor: 10 hp
Back Gauge Motor: 1/2 hp
Voltage: 220 volt / 3 phase
Oil Capacity: 45 gal
Dimensions (L/W/H): 94.50” / 63” / 94.50”
Weight: 8,800 lbs

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details