Machine Tools > Lathes & Turning Centers > Precision Lathes    < Back

22" x 160" SHARP® Precision Lathe - $RFQ

Item Number: #00082804
22&quot; x 160&quot; SHARP&#174; Precision Lathe

22" x 160" SHARP® Precision Lathe
Stock Code:  22160B
Price: $RFQ

Precision Lathes

Manufacturer:  Sharp
Model:  22160B
Condition: New

These lathes are equipped with geared headstock, hardened and ground bed ways. Larger models are built on one piece casting bases for rigidity.
The “B” models are equipped with D1-11 camlock spindle, 4.5” spindle bore. Other models are equipped with D1-8 camlock spindle, 3.1/8” bore.
The spindle is mounted on 2 precision tapered roller bearings and one ball bearing. This triple bearing support system ensure accuracy and rigidity at all times.
Handles that are used for engaging gears are built with locking pins to prevent the handles from being knocked out of place accidentally or under heavy cutting circumstances. Pulling the spring-loaded handle back and then shift does repositioning of handles.
The universal gearbox design allows easy selection of inch and metric threading by just turning the lever to the assigned position instead of changing individual gears outside the headstock.
A rotational style lever that results in less movement of the gears compare with the back-and-forth shifting style lever does selection of gears at the gearbox. Less movement of the gears means less wear and greater accuracy.
The gapped bed design allows extra large work piece to be chucked at the spindle when the gap is taken out.
Bed ways are induction hardened and ground for durability.
Headstock gears are hardened and ground, made out of Chrom-Moly alloy steel for maximum wear.
The headstock is equipped with a job button that allows inching movement of the spindle for easy engagement of gears.
One shot lube system is installed in the apron to direct lube oil to all the sliding surfaces.

4-jaw chuck (16” for B models)
Steady rest with bronze tip ( 3/4” - 9” )
Rapid traverse on carriage for models with center distance of 100” & over
Follow rest
Face plate (18”)
Coolant system
Chuck guard
American tool post
Halogen work light
Longitudinal carriage stops
Tool kit

Swing Over Bed: 22"
Swing Over Cross Slide: 13.2"
Swing Over Gap: 31", 12"
Distance Between Centers: 160"

Spindle Nose Type: D1-11 Camlock
Spindle Bore: 4.5"
Spindle Speeds (12): 10-1,000 rpm
Taper of Spindle Bore: MT#7
Taper of Center: MT#5

Longitudinal Feeds – in/rev (18): 0.002 - 0.032”
Cross Feeds – in / rev {#}: 0.001 –0.0094” {17}
Inch Threads (#): 2-56 tpi {44}
Metric and Module Threads {#}: 0.5-14mm {24}
D.P. Threads (36): 4-56 mm
Leadscrew Pitch, Diameter: 4 tpi, 1-1/2”

Cross Slide Travel: 11.8"
Compound Rest Travel: 7.8"
Compound Width: 6"

Bed Width: 15-3/4"
Bed Length: 183"

Quill Travel (graduated): 6-1/2"
Quill Diameter: 3"
Quill Taper: MT#5

Spindle Motor (220V or 440V, 60, 3): 15 HP
Net Weight (approx.): 10,626 lbs.
Standard Color: Gray

Voltage: 220 & 440
Phase: 3 phase

803-2039: 33 - Jaw Chuck 20" D1-11 (Bison) - 7.48” Bore
803-2539: 3 - Jaw Chuck 25" D1-11 (Bison) - 7.60” Bore
853-1639: 4 - Jaw Chuck 16" D1-11 (Bison)
853-2039: 4 - Jaw Chuck 20" D1-11 (Bison)
853-2539: 4 - Jaw Chuck 25" D1-11 (Bison)
3J15D11: 3 - Jaw Chuck 15" D1-11 (BTC)
3J20D11: 3 - Jaw Chuck 20" D1-11 (BTC)
4J16D11: 4 - Jaw Chuck 16" D1-11 (BTC)
4J20D11: 4 - Jaw Chuck 20" D1-11 (BTC)
4J25D11: 4 - Jaw Chuck 25" D1-11 (BTC)
991126: Taper Attachment (Factory Installed)
2531-6064: Arbor- Jacobs
2425-7036: Drill Chuck – Jacobs (3/16" – 3/4" Capacity)
CA-2511-7350: Quick Change Tool Holder (Aloris) 7 pcs.
10855: Live Center – Royal (Dual Bearing) MT#5
LC-MT5: Live Center – MT#5
CC-2680B: 5C Lever Collet Closer
Factory Installation - 5C Collet Closer
ACC-5C: 5C Collet Set (1/8 to 1/16" x 1/16" 16 pcs.
20C-02: Micrometer Carriage Stop
22C-STEADY12: Steady Rest 12"
22C-STEADY15: Steady Rest 15"
26C-RJAW: Roller Jaws Set (3 pcs)

Digital Readout Systems
FG-22160: Fagor 20i D.R.O. (installed*)
AR-26160: Acu-Rite 200S D.R.O. for 22160B, 26160B, 30160B
NW-26160: Newall DP700 D.R.O. for 22160B, 26160B, 30160B
Factory Installation - D.R.O.

*Fagor DRO price includes installation

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details