Machine Tools > Millers & Milling Machines > Knee Millers    < Back

10" x 54" U.S. INDUSTRIAL® Heavy Duty Electronic Variable Sp - $RFQ

Item Number: #00062934
10&quot; x 54&quot; U.S. INDUSTRIAL&#174; Heavy Duty Electronic Variable Sp

10" x 54" U.S. INDUSTRIAL® Heavy Duty Electronic Variable Sp
Stock Code:  3EVH-5-KIT
Price: $RFQ

Knee Millers

Manufacturer:  U-S-Industrial
Model:  3EVH-5-KIT
Condition: New

Large 10” x 54” table with 3 T-slots, 5/8”, on 2.5” centers, Table travel is 37.4”. Leadscrew pitch is 5TPI with dials on each end graduated in .001”.
Large knee allows saddle to travel 16.5” for crossfeed with .001” dial graduations
Large knee travel is 16.5” with 10TPI leadscrew, .001” dial graduations
Large ram allows for over 18.5” of travel, inlaid scale, and deep throat for large workpieces
Large SquareWays on Y and Z Axis…………. Double locks on all axis
Aged stressed castings, stress relieved for long life and accuracy, Meehanite type
Power quill feed allows for 0.0018, 0.003, 0.006 Inches of feed per revolution of spindle
Hardened and ground and precisely scraped work table, saddle and knee ways, turcite B coated for wear resistance
Centralized one-shot lubrication pump lubricates all way surfaces and leadscrews
Backlash adjustment for leadscrews, Gib adjustments for ways
Electrical cabinet with internal transformer for 110V and 24V devices, circuit breader protected, Low Voltage controls, 24 volt spindle fan cooling motor, 24 volt halogen machine light. Transformer also includes power supply for digital readout and power table feed.
Operator low voltage controls for spindle drive and coolant pump, with emergency stop button. Spindle off/forward/reverse switch.
Built in coolant tank base with coolant pump, pressure and return hose , nozzle and valve, Installed and ready to use. Base chip pan to help prevent coolant overflow.
Schneider digital infinitely variable speed spindle drive, 5 Horsepower (4.0Kw) powers the 5 HP three phase induction spindle drive motor from 65 to 3750 RPM. Spindle speed indicator on head shows RPM in direct drive and back gear. Spindle induction motor is finned for cooling and has 24 volt fan cooling system.
Sino three axis digital readout has 0.0002” resolution. Readout comes mounted to knee, table and cross and is ready to use. The readout is inch/metric switchable, with absolute incremental function. There is a calculator function, bolt hole pattern function, line pattern function, and arc calculate function. A comprehensive manual is included.
Power table feed is Align model AL500SP. Infinitely variable feed from .8 to 32 IPM with rapid button, on/off switch, and adjustable travel stops. This heavy duty power feed has 150 inch pounds of torque, with max to 650. Power table feed comes installed on machine, ready to use.
Toolbox and tools, manuals, electrical drawing, test certificate all included.

PART# VS-606V7: Upgraded to 5HP Schneider electronic vari-speed spindle drive
PART# AL500SP: Heavy duty power table feed on X axis
PART# FCKIT: Flood coolant pump, hose, nozzle
PART# CPKIT: Chip pan
PART# MLKIT: Machine light
PART# FRWCKIT: Front and Rear way covers
PART# SINO3AX: Three axis digital readout

Working surface: 10” x 54”
Longitudinal travel: 34.4” with powerfeed (37.4” without powerfeed)(Powerfeed stops prevent overtravel.)
Cross travel: 16.5" (15.5” with readout installed)
Vertical travel: 16.5"
Ram travel: 18.5" with scale
Head tilt, left to right: 90 degrees left, 90 degrees right with degree ring scale
Head Tilt, front to back: 45 degrees front, 45 degrees back with degree ring scale
Ram circular movement: 360 Degree with degree ring scale
T-slots: 3 @2-1/2" centers, 5/8" Ea.
Spindle drive: Yaskawa 4.0Kw (5 Horsepower) Variable frequency inverter
Spindle range (Electronic Variable): 60-3750 RPM with frequency changer
Spindle type: R-8
Quill Travel & Diameter: 5" travel and 3-3/8" diameter
Power quill feed range, inches per rev: 0.0018”, 0.003”, 0.006”
Weight of work piece, max: 660 lbs.
Spindle motor: 5 HP, 208-240 volt, induction drive spindle motor, motor- standard
Electrics: 208-240 volts, 3 phase – standard (For 440/460/480 Volt operation order transformer from option list.)
Machine, Net Weight:3,400 lbs.

3PHTRANS-K: Transformer for 440/460/480 Volt operation, mounted and wired
PDB-PB001: Air Power Drawbar, pneumatic, installed
Y150-3V: Bestline Power Feed for Y-axis (cross feed)
Z150-3V: Bestline Power Feed for Z-axis (knee feed)
R8ER32KIT-K: Mill QC collet set, 1 holder R-8 to ER32, 1 spanner for collet nut, 11 ER32 collets from 1/8" to 3/4", all in form fitted case
CK-K: Clamp kit, 58 piece, bolts, nuts, step blocks, fingers, for fixturing
P100-K: Precision Parallet set, several matched parallels in form case
6"VISE-K: Milling Vise, 6" lock type
R8-SET: R-8 Collet Set, 11 pieces

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida
Contact the Seller
Sierra Victor Industries
  610-B Oak Place
Port Orange
FL 32127
United States
Request Call from Seller Email seller
View sellers full listings/Website

Email Seller

Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
* Report advert as sold or incorrect details