SAET (AJAX TOCCO) VERTICAL INDUCTION HARDEN, QUENCH AND TEMPER SYSTEM FOR HEAT TREATING BEARING RACES, SLEWING RINGS AND GEARS
MANUFACTURED IN 2009
ELECTRICS: 460 VOLTS, 3 PHASE
FLOOR SPACE: 48’WIDE X 33’ FRONT TO BACK
MINIMUM INNER DIAMETER:47.2"(1200mm)UP TO MAXIMUM OUTER DIAMETER:314"(8000mm)
PART HEIGHT: 3.9-19.7" (100-500mm)
PART WEIGHT: 10-15 METRIC TONS (22,000 TO 33,000 LBS.)
AREA TO BE TREATED: SINGLE BALL RACES, DUAL BALL RACES, RECTANGULAR RACES, TRIANGULAR RACES,RING GEARS TEETH
HARDENING CASE DEPTH: BETWEEN 1,6 - 8mm (Reference 48HRc min.)
EQUIPMENT SCAN SPEED: UP TO 200mm/sec FOR PART POSITIONING SCAN SPEED BETWEEN 100 AND 1500mm/min. ACCORDING TO RACE DIMENSION AND
HARDENING DEPTH
PART POSITIONING: INCLINED (18")WITH PART EITHER "SUPPORTED" OR "HANGED" BY ROLLERS
INDUCTION HEATER: 200 KW @ 2/30 KHz
INCLUDES OUTSIDE WATER COOLING TOWER (FOR INDUCTION HEATER), POLYMER QUENCH COOLING/CLEANING AND MANY INDUCTION COILS.
*** MUST SEE CONDITION ***
PHOENIX CNC VERTICAL BORING MILL WITH LIVE MILLING USED WITH THIS QUOTED UPON REQUEST
FOR MORE INFORMATION: Call Mike at 973-497-7540