Machine Tools > Millers & Milling Machines > Bed Type Millers    < Back

B3VS Bed Type Mill - $RFQ

Item Number: #00035147
B3VS Bed Type Mill
 
 
 


B3VS Bed Type Mill
 
Price: $RFQ
Subcategory: 

Bed Type Millers

Model:  B3VS
Condition: New
 
• Table size: 12" x 60"
• Travel: X = 41", Y = 20", Z = 23"
• Table Load Capacity: 2200 pounds
• Spindle Taper: NT-40 or CAT-40
• Spindle Speeds: 130 - 5160 RPM
• Centroid M400 CNC
• Heavy-duty meehanite castings
• Hardened & ground square ways
• Turcite-coated surfaces
• Hardwheels for all axis
• Manual or automatic quill
• Easy to use control with Mastercam
• Auto lubrication
• Power draw bar
• Halogen work light
• Coolant system
• Table top enclosure
• Base chip coolant drop pan

CENTROID M400 CNC Control:
• Three Axis Simultaneous
• 15" Color LCD Screen With Graphics
• Pentium Processor
• Ethernet Card
• USB Port
• RS-232 Communication
• Hard Drive
• Expandable to 4th Axis*
• Teach Mode
• 2 & 3D Graphics
• Math Help
• Canned Cycles
• Fast Setup Parts
• 32 Bit PC Based DSP Technology
• Coolant Controls**
• Output For Auto Lube
• Programmable Spindle
• Easy switch over to Spanish / Espanol

Powerful control with user-friendly operation.
Cut parts the first day with CENTROID's straight-forward operation. Machine parts not possible with other controls. Get more work through a machine with faster setups. Produce parts with a better surface finish. Spend less time programming and more time making chips. Bring in more work and bid on higher paying jobs.

Useful Tools for quicker job turn around.
Stop and restart the job at any point. Stop, make any adjustments, and restart right where you left off. Toolpath Graphics show you the cutter path before & while running the job. On-the-fly override control of feeds and speeds. Useful Help Screens guide you through Setup and Programming. Large Color LCD display is easy to read. Run large part programs with no limitations. High Speed processing provides smooth machining, no gouging. Fast, smooth continuous tool motion, no hesitation or dwell.

Dedicated control panel for Milling functions.
Clearly labeled controls for each axis and direction. Dedicated buttons for spindle and coolant controls. Spindle speed override and Feedrate override. Tool Check, Feed Hold, Cycle Start, Rapid override, Incremental and Continuous Jog, Single Block. Customize with Tool index +/-, Clamp/Unclamp, Vac on/off, & more. Extra auxiliary buttons are programmable for special applications. Fully sealed, coolant proof, long-lasting in shop environment. Tactile feedback, raised buttons with distinct action. Indicator lights show the selection made.

Conversational Programming is fast and easy.
Program parts right at the control or offline with your desktop PC Convert geometry from DXF files to Centroid's Intercon operations. Supports contouring, pocketing, framing, drilling, boring, tapping, & threading. Centroid's Intercon generates the G codes for you. Help screens for all the common milling cycles, just fill in the dimensions. Even lines and arcs are canned cycles. A graph of the part shows your work as you go. Graph at any point. Automatic pocket cleanout, Intercon auto creates the roughing and finish passes automatically. Fill in the blank: Threadmilling, Drilling, (3 types of cycles), Tapping (Rigid, Rigid peck tapping, Floating), Pocketing, Facing, Auto connect radius, Lines, Arcs, Math Help, Teach in and much more!

ACCU Mill with Centroid M400 CNC Control:
• CNC Controller is made in the USA
• One Day of On-site training usually included
• Power backup (30minutes)
• Easy cosole switch from CNC to manual DRO
• High precision ballscrews for accurate positioning
• Heavy gusy servo motors capable of machining parts at rated capacity of machine
• 23"/LB DC servo motors
• CNC control runs on 110V AC power
• Mitutoyo linear glass scales for closed loop feedback
• 15" LCD color LCD monitor, real-time graphics display, user-friendly touchpad
• Pentium processor, Windows® operating system
• RS232 Port
• USB Port
• Direct G-Code


Scoll down for photo of Centroid Control Panel

USB drive for quick and easy file transfer.
All CENTROID CNC controls are equipped with a USB port and floppy drive. Having a standard PC compatible USB port makes file transfers fast and easy. Program parts on your desktop PC and transfer to control Bring in part programs from offline CAD/CAM systems Back up programs to floppy disk or USB flash drive. Transfer programs from one control to another.

Large color LCD display for easy operation and programming. No other control has such a large easy-to-read display. With a special no-glare coating, the CENTROID LCD display is sealed from liquids and greasy fingers. With the 15" display, Programming, Editing, and viewing tool paths is now a joy. Large bright letters. Color tool path graphics shows cutter comp moves. Easy to view from any angle. No flicker, no ghosting, long life, runs cool. Perfectly flat for accruate graphics. Sealed from shop coolant and oils. Special no-glare coating.

Dedicated CNC control panel is str
 
This machine is listed for sale by American Machine Tools Company located in Chicago, Illinois
 
Contact the Seller
 
American Machine Tools Company
  5864 N Northwest Hwy
Chicago
IL 60631
United States
 
Request Call from Seller Email seller
View sellers full listings/Website
     

Email Seller

Name*:
Email*:
Phone*:
Address*:
Company*:
Comment*:
Type the code shown*:
Security Code
Send Email
* Mandatory field
Note: For security all enquiries may be monitored

Print Advert Tell a Friend
Add to Watch List Report Advert
 
* Report advert as sold or incorrect details