buy & sell, new & used machinery, machine tools & equipment

<Prev | 711 | 712 | 713 | 714 | 715 | 716 | 717 | 718 | 719 | 720 | Next>
Refine: Viewing 14301 - 14320 of 19753 matches
Sort by:
Items Per Page:  20  |  50 |  100
WAFIOS MODEL #BT25 HIGH SPEED TACK MACHINE
$RFQ
WAFIOS MODEL #BT25 HIGH SPEED TACK MACHINE
MAXIMUM WIRE DIAMETER ............... .12" WIRE LENGTH ......................... .70" - 1.96" PIECES PER MINUTE ................... 175 O.A. DIM. ........................... 90" L X 48" W X 47
WAFIOS MODEL #BT20 HIGH SPEED TACK MAKER
$RFQ
WAFIOS MODEL #BT20 HIGH SPEED TACK MAKER
MAXIMUM WIRE DIAMETER ............... .078" WIRE LENGTH ......................... 55" TO 90" PIECES PER MINUTE ................... 230 O.A. DIM. ........................... 83" L X 40" W X 4
WAFIOS MODEL #BT15 HIGH SPEED TACK MAKER
$RFQ
WAFIOS MODEL #BT15 HIGH SPEED TACK MAKER
MAXIMUM WIRE DIAMETER ............... .060" WIRE LENGTH ......................... .39" TO .70" PIECES PER MINUTE ................... 275 O.A. DIM. ........................... 65" L X 32" W X 4
GLADER #00 NAIL MAKER
$RFQ
GLADER #00 NAIL MAKER
Glader "00" Nail Header .025"-.060" Wire Diameter 1/4"-1 1/4" Nail Length 550 Pieces per Minute AC Motor and Controls Weight - 1500Lbs. Overall Dimensions: 39 x 49
GLADER #00 NAIL MAKER
$RFQ
GLADER #00 NAIL MAKER
Glader "00" Nail Header .025"-.060" Wire Diameter 1/4"-1 1/4" Nail Length 550 Pieces per Minute AC Motor and Controls Weight - 1500Lbs. Overall Dimensions: 39 x 49
10" X 36" U.S. MACHINE MODEL #V, KNEE VERTICAL MILL
$RFQ
10" X 36" U.S. MACHINE MODEL #V, KNEE VERTICAL MILL
SPECIFICATIONS: TABLE: 10" x 36" (6) SPINDLE SPEEDS: 250, 475, 1200 1800, 2850 RPM EQUIPPED WITH: POWER DOWN FEED ON QUILL POWER LONG FEED 1/4 HP, 220/440/3/60 (10) COLLETS PUSH BUTTON MOTOR START
13.2 Ton, GLAMA-DEMAG GSM 120/250 RAIL MOUNTED MANIPULATORS W/ INGOT CARS (2
$RFQ
13.2 Ton, GLAMA-DEMAG GSM 120/250 RAIL MOUNTED MANIPULATORS W/ INGOT CARS (2
Manufacturer - Glama Demag SMS Year - 1991 Status - Installed and under power Specifications Carrying Capacity: 13.2 US tons (120kN) Clamping Moment: 90 ft tons (250 kNm) Load Moment (Related to Center of Front
200mm KZ TENSION LEVELING LINE w/SLITTER, WIDE 5-1/2"
$RFQ
200mm KZ TENSION LEVELING LINE w/SLITTER, WIDE 5-1/2"
SPECIFICATIONS: CAPACITY WIDE ................ 5-1/2" ARBOR SIZE ................... 1-3/8" DIA x 5-1/2" LONG UNCOILER ..................... 14" ID 27" OD 5-1/2" FACE 2 ARM TURNSTY
1300MM (51.18") CLECIM SIEMENS VAI COMBINED TEMPERING AND TENSION LEVELING LINE
$RFQ
1300MM (51.18") CLECIM SIEMENS VAI COMBINED TEMPERING AND TENSION LEVELING LINE
Material: cold rolled strip, annealed cold rolled strip and hot deep galvanized strip Manufacturer: Siemens VAI Clecim Year: 1989 Strip/Material: Strip width: 600 - 1300 mm (23.62" - 51.18") Strip t
7-1/4" KOHLER #18-1000-2, PRECISION LEVELER AND UNCOILER, ROLL 3/4" DIA x 7-1/4&
$RFQ
7-1/4" KOHLER #18-1000-2, PRECISION LEVELER AND UNCOILER, ROLL 3/4" DIA x 7-1/4&
SPECIFICAITONS: NO. OF ROLLS - 19 (9 OVER 10) ROLL SIZE - 3/4" DIA x 7-1/4" WIDE (APPROX) LATERAL ROLL BANK ADJUSTMENT AIR OPERATED PINCH FEED MOTORIZED SCREWDOWNS ENTRY GUIDE ROLLS CONTROL PANEL
60" X .090" HERR VOSS INVERTED PRECISION LEVELER
$RFQ
60" X .090" HERR VOSS INVERTED PRECISION LEVELER
Year 1977 Serial Number S12897 / 4078 Model 72/1.687/19/7 RH Thickness Range: .024" - .090" Width Range: 60" Max - 12" Min Length Range: 144" Max - 24" Min Pack Height: 17" + 4&
7" (178mm) x 7/8" (22mm) BRUDERER 19 ROLL BACKED UP LEVELER
$RFQ
7" (178mm) x 7/8" (22mm) BRUDERER 19 ROLL BACKED UP LEVELER
SPECIFICATIONS: MANUFACTURER: BRUDERER A.S. (SWITZERLAND) TYPE: 19 ROLL BACKED UP LEVELER MODEL No.: 24180B SERIAL No.: 5
LEIFELD 0.125" X 52" MDL# ATM400 HYD. AUTO. TEMPLATED CONTROLLED SPINNING LATHE
$RFQ
LEIFELD 0.125" X 52" MDL# ATM400 HYD. AUTO. TEMPLATED CONTROLLED SPINNING LATHE
CENTER HEIGHT: 26" SWING OVER BED: 52" (10" RISER INSTALLED) TURNING LENGTH: 41" FORMING SLIDE CROSS TRAVEL: 10-3/4" HYD. TAILSTOCK STROKE: 25-1/2" SPINDLE SPEEDS (8): 108 TO 1084RPM
MORANDO #PA-25 LATHE
$RFQ
MORANDO #PA-25 LATHE
CHUCK TO CENTER .............. 62.5" 62" swing 22" center to ways O.A. DIM. .................... 130" X 44" X 67.5" WEIGHT ....................... 5,525 LBS. EQUIPPED WITH:
SOUTHBEND LATHE
$RFQ
SOUTHBEND LATHE
65" total bed length 34" Center to center 5" 3 Jaw chuck 12" swing over bed quick change gearbox for feed changes 208 Volt 3 phase 4.7 amp O.A. DIM. - 66" X 24" X 54" WE
20" X 84" WAFUM MODEL #TUD40/60, ENGINE LATHE
$RFQ
20" X 84" WAFUM MODEL #TUD40/60, ENGINE LATHE
SPECIFICATIONS: SWING OVER WAYS .............. 20" SWING OVER CROSS SLIDE ....... 12-1/8" DISTANCE BETWEEN CENTERS ..... 80" SPINDLE SPEEDS ............... (36) 18 TO 1800 FEEDS ....................
30" X 120" MONARCH HEAVY DUTY ENGINE LATHE
$RFQ
30" X 120" MONARCH HEAVY DUTY ENGINE LATHE
(1) Used 30" x 120" MONARCH Heavy-Duty Engine Lathe, Model 20" CM, S/N 41601 Specifications: Swing Over Bed:30" Swing Over Cross Slide:20" Distance Center to Center:120" Spindle Sp
33" X 84" MASINEXPORT (ROMANIA) ENGINE LATHE
$RFQ
33" X 84" MASINEXPORT (ROMANIA) ENGINE LATHE
(1) Used 33" x 84" MASINEXPORT (Romania) Engine Lathe, New 1975 (est) Specifications: Actual Swing Over Bed:33-1/2" Swing Over Cross Slide:20" Distance Center to Center:84" Spindle Spee
BRITAN LATHE
$RFQ
BRITAN LATHE
O.A. DIM. - 38" X 23" X 54" WEIGHT - 640 LBS, SE
22"/31" X 157" TARNOW GAP BED ENGINE LATHE
$RFQ
22"/31" X 157" TARNOW GAP BED ENGINE LATHE
(1) Used 22"/31" x 157" TARNOW Gap-Bed Engine Lathe, Model TUJ50M, S/N 3436, New 1993 Specifications: Swing Over Bed:22" Swing Over 11-1/4" Removable Gap:31-1/2" Swing Over Cross Sl
Categories:
Condition:
Manufacturer:
Location:
Price:
  •  to 
<Prev | 711 | 712 | 713 | 714 | 715 | 716 | 717 | 718 | 719 | 720 | Next>