buy & sell, new & used machinery, machine tools & equipment

<Prev | 451 | 452 | 453 | 454 | 455 | 456 | 457 | 458 | 459 | 460 | Next>
Refine: Viewing 9141 - 9160 of 19720 matches
Sort by:
Items Per Page:  20  |  50 |  100
Norton
$RFQ
Norton
EXPERT MACHINE REPAIR AND SALES Financing And Leasing Available from Capital Financing Norton 10 x 36 O.D. Grinder - #12998 SN# 24847 Specifications: Nominal Swing: 10" Nominal Length: 36"
Cincinnati
$RFQ
Cincinnati
618 Cincinnati O.D. Grinder
Landis O.D. Grinder
$RFQ
Landis O.D. Grinder
1R Landis 10 x 20 O.D. Grinder
2017 CATERPILLAR 308E2CR EXCAVATOR
$94,500
2017 CATERPILLAR 308E2CR EXCAVATOR
4 CYL CAT ENGINE, 18 IN PADS, GP BUCKET (24 IN WIDE), BLADE (7 FT 8 IN WIDE), MANUAL THUMB, PLUMBING ON STICK, ENCLOSED CAB W/ A/C & HEAT
1985 USED DO-ALL MODEL 2013V VERTICAL BANDSAW, 20"
$RFQ
1985 USED DO-ALL MODEL 2013V VERTICAL BANDSAW, 20"
SPECIFICATIONS THROAT BAND TO COLUMN: 20" MAXIMUM WORK HEIGHT: 13" BAND WIDTH CAPACITY: 1/16" TO 1" SAW BAND LENGTH: 12' 10" OR 154" FILE BAND LENGTH: 153" VAR
  • Throat capacity: 20"
  • Height capacity: 13"
    1984 HARDINGE MODEL HLV-H TOOLROOM LATHE, 11" x 18"
    $RFQ
    1984 HARDINGE MODEL HLV-H TOOLROOM LATHE, 11" x 18"
    SPECIFICATIONS SWING OVER BED: 11" SWING OVER CARRIAGE: 9" SWING OVER CROSS SLIDE: 6" DISTANCE BETWEEN CENTERS: 18" SPINDLE NOSE: 5C HARDINGE TAPER NOSE VARIABLE SPINDLE SPEEDS: 125 TO 3000 RP
    • Swing: 11"
    • Centers: 18"
      2002 IMCAR (CAREL)SIHR-12/5 HYD DBL PINCH PLATE BENDING ROLL, 10' x .5&
      $RFQ
      2002 IMCAR (CAREL)SIHR-12/5 HYD DBL PINCH PLATE BENDING ROLL, 10' x .5&
      SPECIFICATIONS OVERALL LENGTH OF ROLLS: 10’ ROLLING MAX: 1/2” PRE-BENDING: 3 X ROLL DIAMETER, TOP: 11” ROLL DIAMETER, LATERAL: 10.24” POWER: 15 HP WEIGHT: 20,240 LBS EQUIPPED WITH EXTENDED ROLL SHAF
      • Roll length: 120"
      • Thickness: 0.5"
        2007 IMCAR CPHV-120 DOUBLE INTL PINCH HYD ANGLE BENDING ROLL, 5" x 5&q
        $RFQ
        2007 IMCAR CPHV-120 DOUBLE INTL PINCH HYD ANGLE BENDING ROLL, 5" x 5&q
        SPECIFICATIONS FLATS, HARD: 5” X 7/8” Ø 60” FLATS, EASY: 8” X 2” Ø 48” SQUARE BAR: 3” Ø 36” ANGLE, LEG-OUT: 5” X 1/2” Ø 65” ANGLE, LEG-IN: 4” X 1/2” Ø 48” TEE, LEG-OUT: 4-1/2” X 1/2” 
        • Length: 5"
        • Width: 5"
          Parker Majestic 2Z
          $RFQ
          Parker Majestic 2Z
          EXPERT MACHINE REPAIR AND SALES Leasing And Financing Available from Capital Financing Re-manufactured Complete Parker Majestic 618 W/Power Elevation 230 /460 Volt, 1HP, 3 Phase Dismantled saddle and tabl
          MAZAK (YAMAZAKI) MODEL 18 GAP BED ENGINE LATHE, 18” X 80”
          $RFQ
          MAZAK (YAMAZAKI) MODEL 18 GAP BED ENGINE LATHE, 18” X 80”
          WORKING CAPACITY SWING OVER BED: 18” SWING IN GAP: 25-1/8” CENTER DISTANCE: 80-7/8” SPINDLE SPINDLE BORE: 3-1/8” SPINDLE SPEEDS (12): 25 – 1,500 RPM CARRIAGE RANGE OF LONGITUDINAL FEEDS (80): .0023 - .05
          • Swing: 18"
          • Centers: 80"
            2010 ELUMATEC MODEL SBZ-151 5-AXIS PROFILE MACHINING CENTER, 39.5’ X 45.27”
            $RFQ
            2010 ELUMATEC MODEL SBZ-151 5-AXIS PROFILE MACHINING CENTER, 39.5’ X 45.27”
            SPECIFICATIONS X-AXIS: 12 METERS/ 39.5’ Y-AXIS: 45.27” Z-AXIS: 28” PIVOTING ANGLES (A-AXIS): +/- 110° (WITH 400MM SAW BLADE) PIVOTING ANGLES (C-AXIS): +/- 180° SPINDLE SPEED: 24,000 RPM TOOL CHANGER (
            • X axis: 473"
            • Y axis: 45"
              Heald 273A Grinder
              $RFQ
              Heald 273A Grinder
              EXPERT MACHINE REPAIR & SALES #13102 Leasing And Financing Available from Capital Financing Heald 273A Universal Internal Grinder Model 273A, SN# 471526 Red Head Spindle SN# 86264 Equipped with: Wo
              Heald 273A with extended bridge
              $RFQ
              Heald 273A with extended bridge
              Heald 273A Universal Internal Grinder Model 273A, SN# G2924 Equipped with: Extended Table Facing attachment, work head positioning stop with indicator, manual positioning work head slide, rough and finish cycles
              SOUTH BEND 16 STRAIGHT BED ENGINE LATHE, 16" X 36"
              $RFQ
              SOUTH BEND 16 STRAIGHT BED ENGINE LATHE, 16" X 36"
              SPECIFICATIONS SWING OVER BED: 16-1/4" DISTANCE BETWEEN CENTERS: 36" BED LENGTH: 60" SPINDLE BORE: 1-3/8" SIZE OF CENTER, MORSE TAPER: NO. 3 NUMBER OF THREADS AND FEEDS:
              • Swing: 16"
              • Centers: 36"
                SOUTH BEND 16 STRAIGHT BED ENGINE LATHE, 16" X 36"
                $RFQ
                SOUTH BEND 16 STRAIGHT BED ENGINE LATHE, 16" X 36"
                SPECIFICATIONS SWING OVER BED: 16-1/4" DISTANCE BETWEEN CENTERS: 36" BED LENGTH: 60" SPINDLE BORE: 1-3/8" SIZE OF CENTER, MORSE TAPER: NO. 3 NUMBER OF THREADS AND FEEDS:
                • Swing: 16"
                • Centers: 36"
                  SOUTH BEND 16 STRAIGHT BED ENGINE LATHE, 16" X 36"
                  $RFQ
                  SOUTH BEND 16 STRAIGHT BED ENGINE LATHE, 16" X 36"
                  SPECIFICATIONS SWING OVER BED: 16-1/4" DISTANCE BETWEEN CENTERS: 36" BED LENGTH: 60" SPINDLE BORE: 1-3/8" SIZE OF CENTER, MORSE TAPER: NO. 3 NUMBER OF THREADS AND FEEDS:
                  • Swing: 16"
                  • Centers: 36"
                    SOUTH BEND 16 STRAIGHT BED ENGINE LATHE, 16" X 36"
                    $RFQ
                    SOUTH BEND 16 STRAIGHT BED ENGINE LATHE, 16" X 36"
                    SPECIFICATIONS SWING OVER BED: 16-1/4" DISTANCE BETWEEN CENTERS: 36" BED LENGTH: 60" SPINDLE BORE: 1-3/8" SIZE OF CENTER, MORSE TAPER: NO. 3 NUMBER OF THREADS AND FEEDS:
                    • Swing: 16"
                    • Centers: 36"
                      1978 HEY #3 DOUBLE ENDED FACING & CENTERING MACHINE, 27”
                      $RFQ
                      1978 HEY #3 DOUBLE ENDED FACING & CENTERING MACHINE, 27”
                      SPECIFICATIONS DIAMETER OF WORK: .25” - 6.25” LENGTH OF WORKPIECE: 3” – 27” SWING OVER BED: 21” SPINDLE SPEEDS (15 STEPS): 65 – 1,430 RPM FEED RATE IN THOUSANDTHS IPR OF SPINDLE: (4) STEPS .023 TO .10 MMPR LENGTH
                      • Maximum workpiece diameter: 6.25"
                      • Maximum workpiece length: 27"
                        1986 DO-ALL MODEL C-916 HORIZONTAL BANDSAW, 9" X 16"
                        $RFQ
                        1986 DO-ALL MODEL C-916 HORIZONTAL BANDSAW, 9" X 16"
                        SPECIFICATIONS CAPACITY, RECTANGULAR AT 90 DEGREES: 9" X 16" CAPACITY, ROUND AT 90 DEGREES: 9" CAPACITY, RECTANGULAR AT 45 DEGREES: 8-3/4" X 9" CAPACITY, ROUND AT 40 DEGREES: 9&q
                        • Width capacity: 16"
                        • Height capacity: 9"
                          FALLS MODEL 131 DEBURRING MACHINE, 24 GAUGE X 1/4”
                          $RFQ
                          FALLS MODEL 131 DEBURRING MACHINE, 24 GAUGE X 1/4”
                          DEBURRS TOP AND BOTTOM EDGES AND SMOOTHS THE SHEARED SIDE IN ONE PASS SPECIFICATIONS CAPACITY, THICKNESS: 24 GA X 1/4” CAPACITY, WIDTH: 1/2” TO 4’ OR MORE CAPACITY, LENGTH: 4” TO 10’ OR MORE MATERIAL: STEEL, ST
                          • Maximum sheet width: 48"
                            Categories:
                            Condition:
                            Manufacturer:
                            Location:
                            Price:
                            •  to 
                            <Prev | 451 | 452 | 453 | 454 | 455 | 456 | 457 | 458 | 459 | 460 | Next>