buy & sell, new & used machinery, machine tools & equipment

<Prev | 261 | 262 | 263 | 264 | 265 | 266 | 267 | 268 | 269 | 270 | Next>
Refine: Viewing 5241 - 5260 of 19721 matches
Sort by:
Items Per Page:  20  |  50 |  100
BAILEIGH VMD-15 1.5" Drill Capacity Mill Drill w/R-8 Taper
$RFQ
BAILEIGH VMD-15 1.5" Drill Capacity Mill Drill w/R-8 Taper
CALL 386-304-3720 FOR AVAILABILITY FEATURES: The Baileigh VMD-15 Vertical Mill Drill is the perfect option when operators need to do some light-duty milling that doesn't require a full-size milling machine bu
BAILEIGH VMD-18 1.5" Drill Capacity Mill Drill w/R-8 Taper
$RFQ
BAILEIGH VMD-18 1.5" Drill Capacity Mill Drill w/R-8 Taper
CALL 386-304-3720 FOR AVAILABILITY FEATURES: The Baileigh VMD-18 Mill Drill is the perfect option when operators need to do some light-duty milling that doesn't require a full-size milling machine but still a
2003 SODICK AQ325L CNC WIRE EDM
$28,500
2003 SODICK AQ325L CNC WIRE EDM
LINEAR WAYS, AUTOTHREADING, SUBMERGED, LQ1W CNC CONTROL
  • X axis travel: 13.7"
  • Y axis travel: 9.8"
    Router FxdBs Trim Rckwl
    $149
    Router FxdBs Trim Rckwl
    Router FxdBs Trim Rckwl Model: 2082 Type 1 [Rockwell] S/N: N/A Fixed Base Trim Router 4Amp; 1Ph; 115Volt
    Planer 2-1/2" PortaPlane
    $200
    Planer 2-1/2" PortaPlane
    Planer 2-1/2" PortaPlane Model: 126 [Rockwell] S/N: A116295 7.0 Amp; 1Ph; 120Volt
    Miter Saw 12"-Ridgid
    $199
    Miter Saw 12"-Ridgid
    Miter Saw 12"-Ridgid Model: 40J7 [Ridgid] S/N: E85575A 15Amp; 1Ph; 120Volt
    Wide Blt Sndr 1632 5/1-PM
    $4,299
    Wide Blt Sndr 1632 5/1-PM
    Wide Blt Sndr 1632 5/1-PM Model: 1791250 1632-1 [Powermatic] S/N: 02011632169 Wide Belt Sander w/Mobile Base; 8 Extra Sanding Belts 5Hp; 1Ph; 230Volt
    2008 Haas SL30T with Live Milling
    $RFQ
    2008 Haas SL30T with Live Milling
    2008 Haas SL30T with Live Milling Bar Capacity: 3" Chuck Size: 10" Spindle Speed: 3,400 RPM Spindle Motor: 30 HP X Axis Travel: 9.4" Z Axis Travel: 32.5" Rapid Rate Z Axis: 945 IPM Turret To
    1999 - 22 Ton Strippit 1250H/20 CNC Turret Punch
    $RFQ
    1999 - 22 Ton Strippit 1250H/20 CNC Turret Punch
    Capacity 22 Tons Travels 39" x 50" Max Sheet Size 120" x 50" Max Hole Diameter 3.5 Weight 25,000 lbs Equipped with: Fanuc OP Control 20 Stations w/ 3 A/I 2 Work Clamps Brush Table
    • Tonnage: 22T
      BURN OFF OVEN, POLLUTION CONTROL 36"W 21"L 33"H
      $RFQ
      BURN OFF OVEN, POLLUTION CONTROL 36"W 21"L 33"H
      SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND PRESSURE RELIEF ROOF PANEL. INSIDE WALLS, ROOF AND DOOR ARE LINED WITH LIGHT WEIGHT REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. TWO PACKAGE BURNERS (300,000 BTU/HR
      40 HP AIR COMPRESSOR, INGERSOLL RAND
      $RFQ
      40 HP AIR COMPRESSOR, INGERSOLL RAND
      40 HP WITH DRYER AND TANK, LATE MODEL. SHIP FROM SYRACUSE,NY
      • Motor: 40HP
        BURN OFF OVEN, TOP LOAD, POLLUTION CONTROL, 3'W 3'L 3'H
        $RFQ
        BURN OFF OVEN, TOP LOAD, POLLUTION CONTROL, 3'W 3'L 3'H
        TOP LOAD DESIGN WITH HAND OPERATED COVER. LIGHT WEIGHT REFRACTORY LINING ON WALLS AND DOOR. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR MAIN HEAT AND AFTERBURNER ARE SUPPLIED BY PACKAGE BURNERS (
        INERT ATMOSPHERE OVEN, DESPATCH 25"W 25"L 25"H, 1000 F
        $RFQ
        INERT ATMOSPHERE OVEN, DESPATCH 25"W 25"L 25"H, 1000 F
        INERT ATMOSPHERE OVEN HAS SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING. HEATING AIR IS CIRCULATED HORIZONTALLY. INTERIOR HAS PROVISIONS FOR (8) SHELVES, (4) SHELVES ARE INCLUDED. ORIGINALLY DESIGNED FOR STRESS RELIEVIN
        • Chamber width: 25"
        • Chamber length: 25"
          QUINCY 50 HP ROTARY SCREW AIR COMPRESSOR
          $RFQ
          QUINCY 50 HP ROTARY SCREW AIR COMPRESSOR
          50 HP FIXED SPEED ROTARY SCREW COMPRESSOR RATED 226 ACFM. @ 100 PSI. PURCHASE NEW 2016 NEVER USED.
          • Motor: 50HP
            ROLLER CONVEYOR OVEN, FB SERIES, 4'W 8'L 56"H, 500 F GAS
            $RFQ
            ROLLER CONVEYOR OVEN, FB SERIES, 4'W 8'L 56"H, 500 F GAS
            DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. INTERIOR HAS A GRAVITY ROLLER CONVEYOR. HEAT IS SUPPLIED BY A GAS BURNER FIRING INTO A PROTECTED CHAMBER ABOVE WORK AREA AND CIRCULATED BY (2) ROOF M
            • Chamber width: 48"
            • Chamber length: 96"
              VACUUM FURNACE, SURFACE COMBUSTION 36"W 48"L 24"H, 1350 F
              $RFQ
              VACUUM FURNACE, SURFACE COMBUSTION 36"W 48"L 24"H, 1350 F
              HORIZONTAL DOUBLE WALLED WATER COOLED CHAMBER WITH SINGLE SIDE SWING BOLT DOWN FRONT DOOR. WHEN PROCESS BEGINS VACUUM PUMPS EVACUATE THE VESSEL. WHEN COMPLETE VESSEL IS BACK FILLED WITH NITROGEN. HEAT IS
              • Chamber width: 36"
              • Chamber length: 48"
                CAR BOTTOM FURNACE, BEAVERMATIC, 1500 F GAS 7'W 10'L 7'H
                $RFQ
                CAR BOTTOM FURNACE, BEAVERMATIC, 1500 F GAS 7'W 10'L 7'H
                HEAT (4,100,000 BTU/HR MAX TOTAL 5-7 PSI) IS SUPPLIED BY (9) NOZZLE MIX BURNERS WITH SPARK IGNITION AND FLAME SAFETY FIRING FROM ABOVE AND BELOW WORK AREA.. INTERIOR IS LINED WITH LIGHT WEIGHT REFRACTORY. CAR IS ELECTR
                • Chamber width: 84"
                • Chamber length: 120"
                  VACUUM FURNACE, SECO WARWICK BOTTOM LOAD 48"DIA 48"H 2200 F
                  $RFQ
                  VACUUM FURNACE, SECO WARWICK BOTTOM LOAD 48"DIA 48"H 2200 F
                  BOTTOM LOAD VERTICAL VACUUM FURNACE WITH METALLIC HOT ZONE AND HEATING ELEMENTS HAVING CAPACITY OF: 1000 LBS @ 1000C. HEATING ELEMENTS ARE MOUNTED IN FLOOR BELOW HEARTH,ON ROOF & SIDE WALL. POWER TO HEATING ELEM
                  • Chamber width: 48"
                  • Chamber length: 48"
                    USED PIRANHA 140 TON HYDRAULIC SINGLE END PUNCH MODEL SEPP-140, Stock# 11037, Year: 1996
                    $RFQ
                    USED PIRANHA 140 TON HYDRAULIC SINGLE END PUNCH MODEL SEPP-140, Stock# 11037, Year: 1996
                    Brand: PiranhaModel: SEPP-140Specifications:&nbsp;Tonnage: 140 tonsThroat depth: 20.5"Platen size: 36" x 16"Open height: 14"Closed height: 7-3/4"Stroke length: 7"Strokes per minute: 24 @ 1"Main motor: 20 H.P.Voltage:
                    USED PIRANHA 120 TON HYDRAULIC IRONWORKER MODEL P-120, Stock# 11036, Year: 2004
                    $RFQ
                    USED PIRANHA 120 TON HYDRAULIC IRONWORKER MODEL P-120, Stock# 11036, Year: 2004
                    Brand: PiranhaModel: P-120Specifications: Tonnage: 120 tonsThroat depth: 12"Round bar: 1/2" - 2"Square bar: 1/2" - 1-3/8" (blades not included)&nbsp;Plate shear: 20" x 1/2", 18" x 3/4", 12" x 1"Angle shear: 6" x 6" x
                    Categories:
                    Condition:
                    Manufacturer:
                    Location:
                    Price:
                    •  to 
                    <Prev | 261 | 262 | 263 | 264 | 265 | 266 | 267 | 268 | 269 | 270 | Next>