buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > New Jersey

Used Machine Tools in New Jersey

2219 used machine tools items for sale in New Jersey
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 701 - 800 of 2219 matches
Sort by:
Items Per Page:  20 |  50 |  100
SHUSTER Mdl# 1A WIRE STRAIGHTENER
$RFQ
SHUSTER Mdl# 1A WIRE STRAIGHTENER
3/16" SHUSTER 1A STRAIGHTEN AND CUT MACHINE Manufacturer: SHUSTER Model: 1A Condition: GOOD Specifications: WIRE DIAMETER RANGE 062"- 187" MAX LENGTH 7'8" SPEED 120 FPM MOTOR HP 10 EL
SLEEPER & HARTLEY Mdl# 669 WIRE SPRING COILER
$RFQ
SLEEPER & HARTLEY Mdl# 669 WIRE SPRING COILER
WIRE DIAMETER .................... .062" - .207" WIRE FEED ......................... 72" INSIDE DIAMETER ................... 1/4" - 2-3/4" 30 - 90 SPRINGS PER MINUTE FULLMDRIVEN CLUTCH
NILSON Mdl# S0 WIRE FORMER WITH REEL
$RFQ
NILSON Mdl# S0 WIRE FORMER WITH REEL
WIRE DIAMETER 1/16" MAX. FEED 6" EQUIPPED WITH; STOCK REEL ATTACHED CABINETS 1.5 HP 220/440 VOLTSD VARIABLE SPEED 1140 RPM WITH MOTOR AND CONTROLS
NILSON Mdl# S3 WIRE FORMER WITH REEL
$RFQ
NILSON Mdl# S3 WIRE FORMER WITH REEL
WIRE DIAMETER 3/16" MAX.FEED 12" EQUIPPED WITH: STOCK REEL ATTACHED CONT5OLS 5 HP 220440 VOLTS VARIABLE SPEED 1725 RPM
NILSON Mdl# S3 WIRE FORMER WITH REEL
$RFQ
NILSON Mdl# S3 WIRE FORMER WITH REEL
WIRE DIAMETER 3/16" MAX. FEED LWNGTH 12" FLOOR SPACE 61" X 78" WEIGHT 2375 LBS. EQUIPPED WITH: STOCK REEL ATTACHED CONTROLS
NILSON Mdl# S-1 4 SLIDE, WIRE FORMING MACHINE
$RFQ
NILSON Mdl# S-1 4 SLIDE, WIRE FORMING MACHINE
WIRE DIAMETER ................ 3/32" MAX FEED ..................... 8" SOLID CAMS 2 PLANE STRAIGHTENER MOUNTED CONTROLS WITH VARIDRIVE MOTOR AAND CONTROLS 5 HP 1725 1725 220/440 VOLT 3 PHASE 60 CYCLE
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
$RFQ
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1996 MODEL - JUPITER C NUMBER OF BLOCKS - 7 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
$RFQ
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1996 MODEL - JUPITER C NUMBER OF BLOCKS - 7 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
$RFQ
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1999 MODEL - JUPITER C NUMBER OF BLOCKS - 10 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
$RFQ
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1999 MODEL - JUPITER C NUMBER OF BLOCKS - 10 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
WIRE LAB Mdl# 310 THREE SHEAVE MECHANICAL DESCALER W/ AIR JET CLEANER
$RFQ
WIRE LAB Mdl# 310 THREE SHEAVE MECHANICAL DESCALER W/ AIR JET CLEANER
WIRE LAB COMPANY Mdl# 310 THREE SHEAVE MECHANICAL DESCALER W/ AIR JET CLEANER
3,000 Lb. HYDRAULIC UNCOILER
$RFQ
3,000 Lb. HYDRAULIC UNCOILER
3,000 Lb. Uncoiler: Maximum Coil O.D.: 48" Maximum Coil Width: 36" Coil I.D. Range: 16" - 20" SWIVEL BASE EQUIPPED WITH: 4 KEEPERS ELECTRIC DRAG BRAKE
8" YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL
$RFQ
8" YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL
8" (203mm) YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL THIS IS A 8" (203MM) API TUBE MILL ALONG WITH ROLLER CONVEYOR & PIPE TRANSFER TABLES TO STRAIGHTEN, END BEVEL, HYDROSTATIC TEST, NDT/ULTRASONIC
127mm (5") x 4mm Neirotti Tube Mill with Thermatool Welder OTO Cut Off
$RFQ
127mm (5") x 4mm Neirotti Tube Mill with Thermatool Welder OTO Cut Off
Manufacturer: Neirotti Italy / Thermatool USA / OTO Mills/ MAIR Research Tube Diameter Range: 42mm to 127mm Wall Thickness Range: 1.2mm to 4mm Line Direction: Right to Left Speed: 100mpm Complete Mill with the Fo
63.5mm x 4mm MTM Rafted Tube Mill Line with MAIR Packaging Line
$RFQ
63.5mm x 4mm MTM Rafted Tube Mill Line with MAIR Packaging Line
Manufacturer: MTM Italy Year: 1992 Diameter Range: 12.7mm to 63.5mm Wall thickness Range: 1.5mm to 4mm Mill Speed: 150mpm Direction: Right to Left Complete Tube Mill with the Following Components: Double End U
60.3mm (2.3") x 3mm OTO Mills Tube Mill Line with MAIR Packaging Line
$RFQ
60.3mm (2.3") x 3mm OTO Mills Tube Mill Line with MAIR Packaging Line
Manufacturer: Oto Mills Installation: 1991 Update: 2007 Tube Diameter Range: 16mm to 60.3mm Thickness Range: 0.8mm to 3mm Tube Length: 4 to 8meter Mill Speed: 130 meter/minute Direction: Left to Rigth Complete
57mm x 3.5mm MTM Rafted Tube Mill Line with MAIR Packaging Line
$RFQ
57mm x 3.5mm MTM Rafted Tube Mill Line with MAIR Packaging Line
Manufacturer: MTM Italy Year: 1990 Diameter Range: 35mm to 57mm Wall thickness Range: 1.5mm to 3.5mm Mill Speed: 150mpm Direction: Right to Left Complete Tube Mill with the Following Components: Double End Unc
1.25" x .080" Somenor Welded Tube Reducing Mill
$RFQ
1.25" x .080" Somenor Welded Tube Reducing Mill
Manufacturer: Somenor -Mill Capacity Wall Thickness Range: 0.6mm (0.023) - 2mm (0.078). Line Speed: 35 to 100 m/min. Tube O.D: 8mm (.315") - 32mm (1.25") Tube: 8 meter Shaft Diameter: 40mm (1.6")
1/2" NUTAP MAS 14 NUT TAPPER
$RFQ
1/2" NUTAP MAS 14 NUT TAPPER
1/2" Nutap Model MAS-14 Twin Spindle Nut Tapper 1/4"-1/2" Product Range ( Tap Size) 7500-15,000 PPH Hopper AC Motor and Controls
500 TON ESCO HYDRAULIC SWAGING PRESS
$RFQ
500 TON ESCO HYDRAULIC SWAGING PRESS
Machine Details: CAPACITY ........................... 500 TON OPEN ............................... 8" JAW TRAVEL ......................... 3" CLOSED ............................. 5" CENTER OF PIN TO C
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER
$RFQ
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER MANUFACTURER - SUTTON S/N - 1164 PRODUCT CAPABILITY - SEAMLESS TUBING AND CASING TUBE RANGE - 3.5"-7.5" OD (88mm-190mm) STATUS - INSTALLED IN
70" KAMPF PRECISION ALUMINUM SLITTING LINE (2001)
$RFQ
70" KAMPF PRECISION ALUMINUM SLITTING LINE (2001)
Description Year 2001 Aluminum Alloys: 1145, 1100,3003, 7072, 811 Temper: 0 - H19 Entry Strip Width: 25" - 69" (635mm - 1753mm) Line Speed: 2600 FPM (800 Met/Min) Thickness: .002" - .015" (.05mm
60" x .250" HERR VOSS TRIPLE INJECTOR HEAD SLITTING LINE W/6HI STRAND EXTENSIONE
$RFQ
60" x .250" HERR VOSS TRIPLE INJECTOR HEAD SLITTING LINE W/6HI STRAND EXTENSIONE
Thickness: .015 - .250" Yield Strength: 50,000 PSI Max Shear Strength: 50,000 PSI Max Coil Size: Width: 12 - 60" I.D.: 20- 24" O.D.: 72" Max Weight: 40,000+ Pounds Max Slitter Capacity: 2
1550mm x 6mm x 33 Ton Fagor Loop Injector Slitting Line
$RFQ
1550mm x 6mm x 33 Ton Fagor Loop Injector Slitting Line
Manufacturer: Fagor Year: 1991 Material: Hot and Cold Rolled Steel Strip width: 500 to 1550mm Thickness Range: 0.9 to 6mm Line Speed: 75 to 150m/min Total AC Power Installed: 65HP Total DC Power Installed: 460HP
RAS MODEL 79.26 MULTIBEND CENTER, YEAR 2000
$RFQ
RAS MODEL 79.26 MULTIBEND CENTER, YEAR 2000
RAS MODEL 79.26 MULTIBEND CENTER NEW 2000 WORKING LENGTH MAX. 2560mm (100") SHEET THICKNESS MAX. 2.0mm (14 Ga) MILD STEEL 1.5mm (16 Ga) STAINLESS STEEL 3.0mm (0.025") ALUMINUM FINISHED PART LENGT
KRB DUAL ARBOR REBAR STRAIGHT & CUT MACHINE
$RFQ
KRB DUAL ARBOR REBAR STRAIGHT & CUT MACHINE
MANUFACTURER - KRB YEAR - 2007 FPM - 360 ARBOR - DUAL BAR CAPACITY - 10MM-16MM (#3-#5 REBAR) SHEAR - HYDRAULIC FLYING RUNOUT - 40'
1 1/4" x 12', PACIFIC 1000R HYDRAULIC SHEAR
$RFQ
1 1/4" x 12', PACIFIC 1000R HYDRAULIC SHEAR
SPECIFICATIONS: NOMINAL CAPACITY (MILD STEEL) 1" X 12' MAX CAPACITY MILD STEEL 1-1/4" X 12' RAKE ANGLE 5/8"/FT DISTANCE BETWEEN HOUSINGS 12'3" KNIFE SIZE 1-3/4" X 6-1/2" POWERED BAC
6" - 16" HERTWICH ENGINEERING (SMS GROUP) BILLET SAWING SYSTEM, INSTALLED 2008
$RFQ
6" - 16" HERTWICH ENGINEERING (SMS GROUP) BILLET SAWING SYSTEM, INSTALLED 2008
6" - 16" HERTWICH ENGINEERING (SMS GROUP) BILLET SAWING SYSTEM, INSTALLED 2008 Line Technical Data Diameter of logs: minimum: 6 inches maximum: 16 inches (12" largest tested) maximum entry log le
12" x 16" DOALLL C-70 BAND SAW
$RFQ
12" x 16" DOALLL C-70 BAND SAW
Catalog Specs: Tube and or Flats: 12" x 16" Rated Capacity Rounds: 12-3/4" Rated Capacity Variable Blade Speeds: 60 to 350 FPM Blade Size:
8.5" X 2.5" X 9.5" RUESCH 4HI REVERSING MILL
$RFQ
8.5" X 2.5" X 9.5" RUESCH 4HI REVERSING MILL
Manufacturer - Ruesch Type - 4hi reversing Work roll - 2.5" x 8.5" Back up rOLL - 9.5" X 8.5" Current product - stainless steel ID/OD - 16" id/44" od
5" (127mm) x 16" (406mm) x 16" (406mm), BLISS, 4-HI REVERSING MILL
$RFQ
5" (127mm) x 16" (406mm) x 16" (406mm), BLISS, 4-HI REVERSING MILL
SPECIFICATIONS: MANUFACTURER: E.W. BLISS CO. (U.S.A.) TYPE: 4-HI COLD REVERSING MILL W/AGC WORK ROLL SIZE: 5" (127MM) DIA. 15 1/2" (394MM) FACE WORK ROLL BEARINGS: TIMKEN ROLLER BACKUP ROLL SIZE: 16�
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014)
$RFQ
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014)
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014) Mill Type 2 Hi - Single Direction (Right to Left) Roll Diameter
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL W/HYDRAULIC SCREWDOWNS, NEW 2002
$RFQ
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL W/HYDRAULIC SCREWDOWNS, NEW 2002
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL WITH HYDRAULIC SCREWDOWNS, NEW 2002 MANUFACTURER - INTEGRATED INDUSTRIAL SYSTEMS (I2S) YEAR - 2002 SPEED - 550 FPM ROLL FACE - 19" ROLL DIAMETER -
SUMITOMO PLATE MILL
$RFQ
SUMITOMO PLATE MILL
Located in a Building- 250 Meters X 120Meters 500,000 Tons per year Installed 2006. Shutdown 2012 Material 1800mm x 12 - 20mm finished thickness Slabs - 250mm x 1500mm x 1500mm, 4.5 ton Equipment original 1980, Rei
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL
$RFQ
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL Line Components: Melting Furnace Holding Furnace Inline Degassing Unit Tundish Casting Wheel - Properzir Model 7C Casting Wheel Sensor Arm Shear Pinch Roll
PRATT & WHITNEY THICKNESS GAUGES & SPARE PARTS - Mdl D, D-10 AND 10A
$RFQ
PRATT & WHITNEY THICKNESS GAUGES & SPARE PARTS - Mdl D, D-10 AND 10A
Pratt & Whitney Thickness Gauges & Spare Parts - Mdl D, D-10 and 10-A Large assortment of Pratt and Whitney thickness gauges and spare parts. Models include Model D, Model D-10, and Model 10-A. Parts include gauge
WEBB #RL3P INITIAL PLATE PINCH ROLLS
$RFQ
WEBB #RL3P INITIAL PLATE PINCH ROLLS
CAPACITY ........................ 8' X 1/4" ROLL DIAMETER .................... 8" WEIGHT ........................... 8000# O.A. DIMENSIONS ...(LRXFBXHI)..... 16' X 3'6"X4'4" EQUIPPED:
BOLDERINI Mdl# BSA-16M BAR STOCK ROLL FEED
$RFQ
BOLDERINI Mdl# BSA-16M BAR STOCK ROLL FEED
MANUFACTURER: BOLDERINI MODEL #: BSA-16M TYPE: VERTICAL 3"x3"x30" WITH TOOLING, MOTOR AND CONTROLS SKID OF DIES AND STANDS
COMPLETE SCHULER / CLEARING AUTOMATED TANDEM LINE
$RFQ
COMPLETE SCHULER / CLEARING AUTOMATED TANDEM LINE
1100 + 800 Ton Clearing Double Action Mechanical Press Pressure: 1100 + 800 Tons Daylight: 1200mm Stroke: 787mm Interior / 660mm Exterior Upper Bed Area: 2370 x 1350mm Interior / 1310-1617mm Exterior Low
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
$RFQ
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
MANUFACTURER: DANLY TONNAGE: 800 STROKE: 24" CUSHION STROKE: 12" SHUT HEIGHT: 38" ADJUSTMENT: 12" BED AREA 60" X 54" EAM AREA 60&
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
$RFQ
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
MANUFACTURER: DANLY TONNAGE: 800 STROKE: 24" CUSHION STROKE: 12" SHUT HEIGHT: 38" ADJUSTMENT: 12" BED AREA 60" X 54" RAM ATEA 60&
BLISS Mdl# C35 OBI SINGLE CRANK FLYWHEEL PRESS
$RFQ
BLISS Mdl# C35 OBI SINGLE CRANK FLYWHEEL PRESS
BLISS CUT-OFF PRESS CAPACITY: 35 TON STROKE: 3" BED AREA: 24" L-R, 17" F-B SHUT HEIGHT: 11" MOTOR 5HP, 550V
100 Ton WARCO Mdl# SC1-100-20-20H STRAIGHT SIDE SINGLE CRANK PRESS
$RFQ
100 Ton WARCO Mdl# SC1-100-20-20H STRAIGHT SIDE SINGLE CRANK PRESS
RATED CAPACITY .................. 100 TONS STROKE OF SLIDE ................. 1-1/2" STROKES PER MINUTE .............. 100 TO 300 ADJUSTMENT ...................... 3" SHUTHEIGHT S.D.A.U. ............. 12
100 TON WILKINS & MITCHELL HOT FORGING PRESS
$RFQ
100 TON WILKINS & MITCHELL HOT FORGING PRESS
REBUILT AND RETROFIT 2017 TO HOT FORGE BOLT Tonnage us ton 125 Capacity m42 dia Length 800 Stroke 8" Spm 45 Shut height 24" Bed area 30( front to back) 40" ( left to right) SEE YOUTUBE VI
WAFIOS Mdl# N4 HIGH SPEED NAIL MAKING MACHINE
$RFQ
WAFIOS Mdl# N4 HIGH SPEED NAIL MAKING MACHINE
One Used Wafios Model N4 High Speed Nail Header Serial Number E2407761 .070"-.122" Wire Diameter Range .511"-2.952" Nail Length Range 550 Pieces per Minute 2 Plane Straightener AC Motor an
60" x 60" x 144" ROCKFORD PLANER MILL
$RFQ
60" x 60" x 144" ROCKFORD PLANER MILL
SPECIFICATIONS HEIGHT UNDER RAIL .................... 60" DISTANCE BETWEEN COLUMNS ............. 60" TABLE STROKE ......................... 144" TABLE DIMENSION ...................... 48" X 140�
TOKO 5 DIE PROGRESSIVE HEADER, REBUILT 2001
$RFQ
TOKO 5 DIE PROGRESSIVE HEADER, REBUILT 2001
One Used 5 Die TOKO Model TPF-105F Progressive Cold Header, Serial No 001818 Built New 1990 Rebuilt 2001 10mm Cutoff Diameter 60mm Die Kickout Max. 70mm Cutoff Length 180 Pieces per Minute Equipped with: IFO
3/16" NATIONAL 4 DIE BOLT MAKING MACHINE
$RFQ
3/16" NATIONAL 4 DIE BOLT MAKING MACHINE
One Used 3/16" 4 Die National Progressive Cold Header 3/16" Maximum Cutoff Diameter 1 1/2" Maximum Shank Length 2 1/4" Maximum Cutoff Length No Trimming, Pointing or Threading 110 Pieces
3/16" NATIONAL 4 DIE BOLT PROGRESSIVE HEADER
$RFQ
3/16" NATIONAL 4 DIE BOLT PROGRESSIVE HEADER
One Used 3/16" 4 Die National Progressive Header Serial No 23686 Built new 1956 3/16" Maximum Cutoff Diameter 1 1/2" Maximum Shank Length 2 1/4" Maximum Cutoff Length 110 Pieces per Minute
3/16" NATIONAL 4 DIE PROGRESSIVE HEADER
$RFQ
3/16" NATIONAL 4 DIE PROGRESSIVE HEADER
One Used 3/16" 4 Die National Progressive Header Serial No 27072 Built New 1964 3/16" Maximum Cutoff Diameter 1 1/2" Maximum Shank Length 2 1/4" Maximum Cutoff Length 110 Pieces per Minute
NATIONAL FORMAX Mdl# FX54M PROGRESSIVE DIE HEADER
$RFQ
NATIONAL FORMAX Mdl# FX54M PROGRESSIVE DIE HEADER
One Used National Formax Model FX54M 4 Die High Speed Cold Former, Serial No 20907 Built New 1991 17.7mm Cutoff Diameter @ 85,000PSI 12-108mm Min/Max Kickout Stroke 15-148 Min/Max Cutoff Length 190 Pieces per
NATIONAL M# M12LS LONG STROKE DSSD COLD HEADER
$RFQ
NATIONAL M# M12LS LONG STROKE DSSD COLD HEADER
NATIONAL Mdl# M12 LONG STROKE, DSSD COLD HEADER 12mm CUT OFF CAPACITY @ 85,000 PSI 100mm MAX CAPACITY UNDER HEAD 130mm MAX BLANK 20mm MIN BLANK 125 PPM O.A. DIMENSIONS: 1.68M X 4.3M W x L APPROX. WEIGHT: 12,
16" (406mm) COIL TO COIL HORIZONTAL BRIGHT ANNEAL FOR STAINLESS STRIP
$RFQ
16" (406mm) COIL TO COIL HORIZONTAL BRIGHT ANNEAL FOR STAINLESS STRIP
SPECIFICATIONS: PURPOSE: COIL TO COIL HORIZONTAL FURNACE TO BRIGHT ANNEAL STAINLESS STEEL STRIP IN A CONTROLLED HYDROGEN/NITROGEN ATMOSPHERE USING A WEB LOOP TENSION CONTROL SYSTEM TO PREVENT STRETCHING AND SHAP
57"W., 16"H., 57"L., RIPOCHE, ROLLER HEARTH ANNEALING FURNACE, 3 ZONE
$RFQ
57"W., 16"H., 57"L., RIPOCHE, ROLLER HEARTH ANNEALING FURNACE, 3 ZONE
Manufacturer: ...................... Ripoche; France Year of Manufacture: ............... 1995 Fuel: .............................. Natural Gas Type of atmosphere: ................ H2N2 Number of Zones: .............
72" x 0.500" x 60,000# Delta Cut To Length Line
$RFQ
72" x 0.500" x 60,000# Delta Cut To Length Line
MATERIALS: HR STEEL MAX. SHEAR: 65,000 PSI MAX. YIELD: 65,000 PSI THICKNESS RANGE: 0.125" - 0.550" MAX. COIL WEIGHT: 60,000# COIL WIDTH RANGE: 36"
80mm Adige Re Cut Machine 2003
$RFQ
80mm Adige Re Cut Machine 2003
Manufacturer: Adige Italy Year: 2003 Round Min. Diameter: 12mm Round Max. Diameter: 80mm Square Range: 10mm x 10mm / 70mm x 70mm Rectangular: 15mm x 10mm / 80mm x 70mm Min Solid Bars: 12mm Max Solid Bars: 30mm
40,000# WINKLE INDUSTRIES COIL ID GRAB
$RFQ
40,000# WINKLE INDUSTRIES COIL ID GRAB
40,000# WINKLE INDUSTRIES COIL ID GRAB MFG - WINKLE INDUSTRIES YEAR - 2011 S/N - MD140 CAPACITY - 40 TON WEIGHT - 7,250 LBS
72" x 10,000# BRANER COIL BANDING LINE W/ TURRET STACKER
$RFQ
72" x 10,000# BRANER COIL BANDING LINE W/ TURRET STACKER
Max Coil OD: 72" Max Coil Weight: 10,000# Complete Line With: 50,000# Entry Turnstile 4 Arms Hydraulic Push-Off Power Rotation Horn Type Downlayer End Discharge 72" Roll Face 79" Table Wi
60 TON CHICAGO -DREIS & KRUMP- MECHANICAL PRESS BRAKE
$RFQ
60 TON CHICAGO -DREIS & KRUMP- MECHANICAL PRESS BRAKE
CHICAGO -DREIS & KRUMP- PRE PUNCH MECHANICAL PRESS BRAKE INLINE SLIDING ROLLER BED CAPACITY: 60 TON FLANGE SIZE: 12" X 76" BETWEEN HOUSINGS: 76" BED AREA: 9" L-R, 12"
12' x 100 TON NIAGARA Mdl# HD100-8-10 HYDRAULIC BRAKE
$RFQ
12' x 100 TON NIAGARA Mdl# HD100-8-10 HYDRAULIC BRAKE
HD100-8-10 NIAGARA 12' (with 2' Horn) X 100 Ton Hyd Brake S/N 51101 W/Hurco AutoBend 5C 2-Axis CNC Back Gauge with Manual Vert Adj, 7" Stroke, 7" Closed Height, 14" Open Height, 102" BH, 8
3/6" X 9' PACIFIC Mdl# J110-10 PRESS BRAKE
$RFQ
3/6" X 9' PACIFIC Mdl# J110-10 PRESS BRAKE
MODEL ....... J110-10 MAX CAP...... 3/16" X 9' PUNCHING .... 73 MAX RAM ..... .50 TONS
LUBOW Mdl# 10 BAR BENDER FOR ROUND, SQUARE AND RECTANGLE
$RFQ
LUBOW Mdl# 10 BAR BENDER FOR ROUND, SQUARE AND RECTANGLE
MANUFACTURER....... LUBOW MODEL ............. M10 FOR RROUND, SQUARE AND RECTANGLE STOCK. WITH BENDING DIES PNEUMATIC FOOT PEDAL CONTROLS
SCHUMAG No. KZRP-0B COMBINED DRAWING MACHINE SCHUMAG
$RFQ
SCHUMAG No. KZRP-0B COMBINED DRAWING MACHINE SCHUMAG
Manufacturer: SCHUMAG Ag, AACHEN, GERMANY Year of manufacture: 1974 - Overhauled on 2015 Model: KZRP-0B Range: -Rounds: Dia. 2- 10mm. Drawing Force: 2 Tons. Bars Length: 2 -4 mt. Speed: 20 -40 -60 mt./min.
SCHUMAG No. KZ-RP 0B COMBINED DRAWING MACHINE
$RFQ
SCHUMAG No. KZ-RP 0B COMBINED DRAWING MACHINE
Type: KZ - RP 0B Manufacturer: Schumag Range: Round Dia. 2 mm - O8 mm Tube Dia. 2 mm - O16 mm Square 7 mm max. Hexagon 8 mm max. Pull Force: 2 ton Speed : 100 m/1' Line composed of: Horizontal and Vertica
3/8" SHUSTER 2ABV STRAIGHTENER AND CUT OFF MACHINE
$RFQ
3/8" SHUSTER 2ABV STRAIGHTENER AND CUT OFF MACHINE
3/8" Shuster 2ABV Straight and Cut Machine MFG - SHUSTER MODEL - 2ABV S/N -562-89 SPECIFICAIONS - .157"-.375" MAXIMUM CUTOFF LENGTH - 12' MOTOR - 20 HP INCLUDES - 4 ENTRY & 4
6' BERGANDI MODEL WWVR0511 FLAT TOP WELDED SELVAGE CHAIN LINK WEAVING MACHINE
$RFQ
6' BERGANDI MODEL WWVR0511 FLAT TOP WELDED SELVAGE CHAIN LINK WEAVING MACHINE
S/N 1846YA06436 NEW 2005/REFURBISHED BY BERGANDI IN 2011 (PHOTOS SHOW MACHINE WHEN IN FACTORY) CAPABILITIES FABRIC HEIGHT SELECTIONS RANGING FROM 3' TO 8' PRODUCES STANDARD 2", 2-1/4" OR 2-3/8
NILSON Mdl# 700-L FOUR SLIDE MACHINE
$RFQ
NILSON Mdl# 700-L FOUR SLIDE MACHINE
MANUFACTURER - NILSON MODEL - 700-L YEAR - 1981 WIRE DIAMETER - 1/32" MAX STRIP WIDTH - 3/4" STRAIGHTENER FEED LENGTH - 4" STROKE OF FRONT SLIDE - 7/16" STROKE OF SIDE SLIDES - 11/16" STR
8 BLOCK KOCH Mdl# KGT1000/8 WIRE DRAWER, New 1995
$RFQ
8 BLOCK KOCH Mdl# KGT1000/8 WIRE DRAWER, New 1995
8 Block Koch KGT1000/8 Wire Drawer, New 1995 8 Block Koch KGT1000/8 Manufacturer - Koch Model - KGT1000/8 Year - 1995 Blocks - 7 Capstan Diameter - 550mm (21.6") Speed - 25m/Sec Max Inlet Wire Diameter - 5
RMG Mdl# 910-3082-73 IN LINE WIRE DRAWER
$RFQ
RMG Mdl# 910-3082-73 IN LINE WIRE DRAWER
RMG Model 910-3082-73 In Line Wire Drawer, Serial No 90072512 built 1990 .562" (14.2mm) Maximum Wire Diameter (alloy) .630" (16.0mm) Maximum Wire Diameter ( mild steel) 36" Capstan Diameter 82 FPM
RMG Mdl# 910-2554-73 IN LINE WIRE DRAWER
$RFQ
RMG Mdl# 910-2554-73 IN LINE WIRE DRAWER
RMG Model 910-2554-73 In Line Wire Drawer, Serial No. 90082548 built 1990 Specifications: 36" Capstan Diameter .562" (14.2mm) Maximum Wire Diameter (alloy) .630" (16.0mm) Maximum Wire Diameter ( mil
RMG Mdl# 910-2554-73 IN LINE WIRE DRAWER
$RFQ
RMG Mdl# 910-2554-73 IN LINE WIRE DRAWER
RMG Model 910-2554-73 In Line Wire Drawer, Serial No. 90082547 built 1990 Specifications: 36" Capstan Diameter .562" (14.2mm) Maximum Wire Diameter (alloy) .630" (16.0mm) Maximum Wire Diameter ( mil
VAUGHN #15 DOUBLE DECK WIRE DRAWER
$RFQ
VAUGHN #15 DOUBLE DECK WIRE DRAWER
9/16" (14MM) VAUGHN #15 DOUBLE DECK MOTOBLOC BULLBLOCK MANUFACTURER - VAUGHN MODEL NUMBER - 15 TYPE - MOTOBLOC DOUBLE DECK SERIAL NUMBER - 13510 CAPACITY - 9/16" (14MM) UPPER BLOCK - 26" LOWER
RMG Mdl# 1214-5098-73 AUTODRAW IN LINE WIRE DRAWER
$RFQ
RMG Mdl# 1214-5098-73 AUTODRAW IN LINE WIRE DRAWER
RMG Model 1214-5098-73 Autodraw In Line Wire Drawer, Serial No. 90032447 built 1990 Specifications: 22mm Mild Steel 20mm Alloy Wire Diameter Up to 98 FPM 50 HP Motor 44" Capstan Diameter Pendant Control
RMG Mdl# 1011-50133-73 IN LINE WIRE DRAWER
$RFQ
RMG Mdl# 1011-50133-73 IN LINE WIRE DRAWER
RMG Model 1011-50133-73 In Line Wire Drawer, Serial No. 90072492 built 1990 Specifications: 5/8" Nominal Maximum Wire Diameter 133 FPM Maximum Speed 44" Capstan 50 HP, 415 Volts, 3 Phase, 50 Cycle A
RMG Mdl# 1011-3065-73 IN LINE WIRE DRAWER
$RFQ
RMG Mdl# 1011-3065-73 IN LINE WIRE DRAWER
RMG Model 1011-3065-73 In Line Wire Drawer, Serial No. 90072507 built 1990 Specifications: 5/8" Nominal Maximum Wire Diameter 65 FPM Maximum Speed 44" Capstan 30 HP, 415 Volts, 3 Phase, 50 Cycle AC
RMG Mdl# 1011-2078-70 IN LINE WIRE DRAWER
$RFQ
RMG Mdl# 1011-2078-70 IN LINE WIRE DRAWER
RMG Model 1011-2078-70 In Line Wire Drawer, Serial No 96023825 built 1996 Specifications: 5/8" Nominal Wire Diameter 44" Casptan 78 FPM 20 HP 415 Volt 3 Phase 50 Cycle AC Motor and Controls Loc
LUBOW Mdl# ML10 WIRE BENDER
$RFQ
LUBOW Mdl# ML10 WIRE BENDER
LUBOW Mdl# ML-10 ONE STOP ROTARY TABLE BENDER TABLE.............. 24" X 72" PRESELECTABLE ANGLES...... 2 ROTATING DISC ............ 10" DEGREE ROTATION .......... 400 ADJ. BENDING POSITION .... IN
LUBOW Mdl# ML10 WIRE BENDER
$RFQ
LUBOW Mdl# ML10 WIRE BENDER
LUBOW Mdl# ML-10 TWO STOP ROTARY TABLE BENDER TABLE.............. 24" X 72" PRESELECTABLE ANGLES...... 2 ROTATING DISC ............ 10" DEGREE ROTATION .......... 400 ADJ. BENDING POSITION .... IN
BETTER ENGINEERING CYBERJET C-24-S5/S3/DH LONG SPRAY RECIRCULATED WASH SYSTEM
$RFQ
BETTER ENGINEERING CYBERJET C-24-S5/S3/DH LONG SPRAY RECIRCULATED WASH SYSTEM
Better Engineering Cyberjet C-24-S5/S3/DH Long Spray Recirculated Wash System Manufacturer - Better Engineering Model - C-24-S5/S3/DH Infeed Opening 24"w x 18"h Washing Section: Tank: 430 gal. Welded 1
5" NATIONAL UPSETTER
$RFQ
5" NATIONAL UPSETTER
5" National Upsetter Manufacturer - National SPM - 30 Stroke - 15" Grip Opening - 7" Gather - 8 1/8" Hold - 2 " Equipped with Air Clutch
2-1/2" ACME UPSETTER
$RFQ
2-1/2" ACME UPSETTER
2-1/2" ACME UPSETTER S/N M-5830 (CATALOG SPECIFICATIONS) STROKE ............ 11" STOCK GATHER ...... 7" DIE OPENING ....... 4" DIE DEPTH ......... 18" DIE WIDTH ......... 12" D
2,500 DOUBLE END COILER
$RFQ
2,500 DOUBLE END COILER
2,500 Lbs DOUBLE END COILER CAPACITY .......... 2,500 Lbs PER ARM EXPANDING MANDRELS
4,000# AMERICAN STEEL LINE DOUBLE END UNCOILER
$RFQ
4,000# AMERICAN STEEL LINE DOUBLE END UNCOILER
4,000 Lbs AMERICAN STEEL LINE DOUBLE END UNCOILER CAPACITY ............. 4,000 Lbs PER ARM
72" X 80,000# PRO ECO DOUBLE CONE UNCOILER AND ENTRY LINE
$RFQ
72" X 80,000# PRO ECO DOUBLE CONE UNCOILER AND ENTRY LINE
Serial No. 6621-06-00 Model TCU-80-80-24-96-72 80,000# Coil Capacity 20" - 36" Coil ID Range 80" Coil OD Range Complete With: 4 Station Coil Storage Coil End Stop Coil Car Pro Eco Double Cone
10,000# SAMCO MDL. SU-10000-DE DOUBLE END UNCOILER
$RFQ
10,000# SAMCO MDL. SU-10000-DE DOUBLE END UNCOILER
Manufacturer - Samco Model -SU-10,000 DE S/N - 87-1227 Capacity - 10,000 ID Range - 18" - 20" OD Max. - 60" Hydraulic Pressure 1000 PSI Swivel Base O.A. Dim. 76" X 104" X 72"
SINGLE ARM TURNSTILE STAND UP MACHINE
$RFQ
SINGLE ARM TURNSTILE STAND UP MACHINE
SINGLE ARM TURNSTILE STAND UP MACHINE
60" x 40,000# AVON 4-ARM TURNSTILE
$RFQ
60" x 40,000# AVON 4-ARM TURNSTILE
MANUFACTURER ............... AVON NUMBER OF ARMS ............. 4 CAPACITY PER ARM ........... 40,000# MAX WIDTH .................. 60"
3/16" NATIONAL 0-500 HI-SPEED THREAD ROLLER
$RFQ
3/16" NATIONAL 0-500 HI-SPEED THREAD ROLLER
One Used 3/16" National 0-500 Hi-Speed Thread Roller, Serial No.33-349-22 built 1974 .086-.190 Screw Diameter 2 1/2" Thread Length Maximum 3" Maximum Shank Length 250-500 Pieces Per Minute Equ
WATERBURY Mdl# 20 HORIZONTAL HEAVY FRAME THREAD ROLLER
$RFQ
WATERBURY Mdl# 20 HORIZONTAL HEAVY FRAME THREAD ROLLER
One Used 3/8" Waterbury Farrel Model #20 Heavy Frame Hand Feed Flat Die Thread Roller 3/8" Maximum Thread Diameter 3" Maximum Thread Length Maximum Speed 60 SPM Equipped with: 5 HP 2250 RPM 3
WATERBURY Mdl# 10 HORIZONTAL HEAVY FRAME HAND FEED THREAD ROLLER
$RFQ
WATERBURY Mdl# 10 HORIZONTAL HEAVY FRAME HAND FEED THREAD ROLLER
One Used 1/4" Waterbury Farrel Model #10 Heavy Frame Hand Feed Thread Roller Specifications: 1/4" maximum Thread Diameter 2" Die Pocket/Dies 5" x 1" x 2" 60 SPM "V" Ram
REED Mdl# A22 THREE DIE CYLINDRICAL DIE THREAD ROLLER
$RFQ
REED Mdl# A22 THREE DIE CYLINDRICAL DIE THREAD ROLLER
One Used Reed Model A22 3 Die Cylindrical Thread Roller, Serial No 410 5/32"- 3 3/4" Diameter 2 3/8" Thread Length In Feed 1/4"-1" Thread Length Thru Feed 108-270 Die RPM 6-33 PPM 20C DI
BRONX Mdl# M-4667 TUBE STRAIGHTENER
$RFQ
BRONX Mdl# M-4667 TUBE STRAIGHTENER
2 Rolls 6" Start - Stop button Electrical cabinet mounted Parts counter 2- 3 HP motors 1760 RPM, 230/460 3 Phase
72" X 1/2" PRO ECO 5 ROLL FLATTENER
$RFQ
72" X 1/2" PRO ECO 5 ROLL FLATTENER
Serial No. 6621-09-00 Model FSG-5-9-72 1/2" Capacity 9" Diameter Work Rolls 12" Diameter Pinch Rolls 5 Roll Flattener 2/3 Roll Work Rolls Hydraulic Roll Adjustment Hydraulic Roll Pressure Hydra
48" x 6.50" x 30,000# Stamco Slitting Line
$RFQ
48" x 6.50" x 30,000# Stamco Slitting Line
Coil Width: 48" Coil Weight: 30,000 Lbs. Coil I.D.: In: 20" - 24" Out: 20" Coil O.D.: 72" Line Direction: Right to Left Consist
48" x 7.00" x 25,000# Lee Wilson Slitting Line
$RFQ
48" x 7.00" x 25,000# Lee Wilson Slitting Line
48" x 7.00" x 25,000# Lee Wilson Slitting Line Materials: HRS, CRS, P & O Maximum Coil Width: 48" (50" untrimmed) Thickness Range: 0.040" - 0.250" Maximum Coil Weight: 25,000# Maxi
48" x .160" x 30,000 Lbs ALCOS LOOP SLITTING LINE
$RFQ
48" x .160" x 30,000 Lbs ALCOS LOOP SLITTING LINE
Weight Capacity: 30,000Lb Material Thickness: .010" - .160" Coil Width: 12" - 48" Coil ID: 20" Coil OD: 72" Direction: Right to Left Entry L-Type Coil Car Powered Lift & Traverse
72" x 60,000 LBS STAMCO INJECTOR HEAD SLITTING LINE
$RFQ
72" x 60,000 LBS STAMCO INJECTOR HEAD SLITTING LINE
GENERAL LINE SPECIFICATIONS MANUFACTURER -STAMCO COIL WEIGHT - 60,000 LBS COIL OD - 30" MIN - 80" MAX TO 40" MIN - 80" MAX COIL ID - 20"-24" ENTRY/EXIT COIL WIDTH - 12"-74" EN
2" SIKO JEWELERS SLITTER (METAL SPLITTER)
$RFQ
2" SIKO JEWELERS SLITTER (METAL SPLITTER)
WITH MOTOR AND FOOT PEDAL
3/8" x 10' PACIFIC MODEL 375R10 HYDRAULIC SQUARING SHEAR
$RFQ
3/8" x 10' PACIFIC MODEL 375R10 HYDRAULIC SQUARING SHEAR
3/8" x 10' PACIFIC MODEL 375R10 HYDRAULIC SHEAR MANUFACTURER - PACIFIC MODEL -375R10 CAPACITY - 3/8" LENGTH - 10' MOTOR - 25 HP, 60 HZ, 230/460 V, 3 PHASE DIMENSIONS - 143" X 87" X 118"
72" CROP SHEAR
$RFQ
72" CROP SHEAR
72" CROP SHEAR
Categories:
Condition:
  • X Used (2219)
Manufacturer:
Location:
  • X New Jersey (2219)
Price:
  •  to 
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>