buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
Refine: Viewing 1 - 20 of 174 matches
Sort by:
Items Per Page:  20  |  50 |  100
Cincinnati No. 5 Horizontal Milling Machine
Cincinnati No. 5 Horizontal Milling Machine, 94" x 20" T-Slotted Table, 50" Longitudinal Table Travel, 16" Cross Table Travel, 20" Vertical Knee Travel, 20" Max Between Spindle Center and Ta
  • Table width: 20"
  • Table length: 94"
    Nider Type NI70 Geared Head Drill Press
    Nider Type NI70 Geared Head Drill Press, 20-1/4" x 16-3/4" T-Slotted Table, 13" throat, #4 MT Spindle, 50-900 rpm Spindle Speeds, Spindle Counter Balance System, Work Light, 1.8 hp, 220 volt, 3-phase, s/n:
    Lieber Gap Bed Engine Lathe 38/54" x 160"
    Lieber Gap Bed Engine Lathe, 54" Swing over Gap, 38" Swing over Bed, 24" Swing over Cross Slide, Approx. 160" Max Between Centers, 48" 4-Jaw Chuck, 17-1/2" Gap Length, Inch and Metric Thread
    • Swing: 54"
    • Centers: 160"
      Lincoln R3S-600 Ideal Arc CV DC Welding Power Source
      Lincoln Model R3S-600 Ideal Arc CV DC Welding Power Source, 600 amps, 44 volts @ 80% Duty Cycle, 61 Max OCV, Ground Clamp, 230/460 volt, 3-phase, s/n: AC455693
      • Power: 600AMP
        Toyota Model 2FG20 LP Powered Lift Truck
        Toyota Model 2FG20 LP Powered Lift Truck, Manual Transmission, 3000mm Lift Height, 3570 kg Max Capacity, Pneumatic Tires, 42" x 5" Forks, 102" Closed Mast Height
        • Lifting capacity: 3.75T
        • Lift height: 9.84'
          Harrison Model M500 Gap Bed Engine Lathe
          Harrison Model M500 Gap Bed Engine Lathe, 21" Swing over Bed, 14-1/2" Swing over Cross Slide, 80" Max Distance Between Centers, 3-1/8" Hole Thru Spindle, (18) Speeds from 31 - 1600 rpm, Inch/Metric Th
          • Swing: 21"
          • Centers: 80"
            Ooya Model RE-1225H Radial Arm Drill
            Ooya Machinery Works Model RE-1225H Radial Arm Drill. 12" Column Diameter, 48" Arm Length, (12) Spindle Speeds from 38-1985 rpm, (6) Feeds from .003 to .039 IPR, #5 MT Spindle, 2-3/8" Spindle Diameter, 11-
            • Arm length: 4'
            • Column diameter: 12"
              Cincinnati Type No. 4 Vertical Milling Machine
              Cincinnati Type No. 4 Vertical Milling Machine, 80" x 17" T-Slotted Table, 50 Taper Spindle, .0010 - .0155" Feeds, 3-Phase, 100" x 88" x 100" Overall. (Note: Needs new Clutches)
              • Table width: 17"
              • Table length: 80"
                Hyd-Mech Model S-20P Horizontal Bandsaw
                Hyd-Mech Model S-20P Horizontal Bandsaw, 12" x 16" Capacity, 90 - 370 fpm Blade Speeds, Hydraulic Clamping, Cycle Counter, Work Light, 10' x 14" Roller Table, 3 hp, 200/230/460 volt, 3-phase, s/n: 406
                • Width capacity: 12"
                • Height capacity: 16"
                  Gates Model Omni Crimp 21 Hydraulic Hose Crimper
                  Gates Model Omni Crimp 21 Hydraulic Hose and Fitting Crimping Machine. 3/16" to 2" Capacity, s/n: 412-5, Approx. 26"x 40" x 70" Overall.
                  Acme Machine Tool No. 2 Turret Lathe
                  Acme Machine Tool No. 2 Turret Lathe, 22" Swing over Bed, 12" Swing over Cross Slide, 42" max Between Centers, 12" 3-Jaw Chuck, 6-Position Turret, 4-Way Tool Post, 3-3/4" Hole Thru Spindle, Taper
                  • Chuck: 12"
                    Ingersoll Rand Model 242-5C-3 Type 30 5HP Reciprocating Type Compressor
                    Ingersoll Rand Model 242-5C-3 Type 30 5HP Reciprocating Type Compressor, 230/460 3 Phase, Approx. 22" Dia. X 48" Length Tank.
                    • Motor: 5HP
                      Wells Index Model 747 Vertical Milling Machine
                      Wells Index Model 747 Vertical Milling Machine, 9" x 46" T-Slotted Table, 34" Longitudinal Travel, 14" Cross Travel, 16" Vertical Knee Adjustment, 5" Quill Travel, 18" Spindle to Table,
                      • Table width: 9"
                      • Table length: 46"
                        Komatsu Model FGZSTLP-12 LP Fork Truck
                        Komatsu Model FGZSTLP-12 LP Fork Truck, 4,000 LB Capacity, 188" Max. Height, 3-Stage Mast, Tilt, Side Shift, Powered Fork Positioners, 4" x 48" Forks, 16" Carriage, Truck Weight 8,550 LBS, 15,075 Hour
                        • Lifting capacity: 2T
                        • Lift height: 15.6'
                          Mitsubishi ZSFGC Forklift, 5,000 LB Capacity
                          Mitsubishi ZSFGC Forklift, 5,000 LB Capacity, LP, Cushion Tires, Tilt, Side Shift, GSE 355 Scale, 25,573 Hours, 3-Stage, Serial No. FGCAF828-16485, 8,800 LBS, Max. Height 130"
                          • Lifting capacity: 2.5T
                            Wroclaw Model TUR 63 Engine Lathe
                            Wroclaw Model TUR 63 Engine Lathe, 24" x 120" Rated Capacity, 17" Swing Over Cross Slide, 124" Maximum Between Centers, 18 Spindle Speeds: 18 to 1,800 RPM, 3 1/4" Hole Thru Spindle, 16" 4-Ja
                            • Swing: 24"
                            • Centers: 120"
                              Gisholt Model 3L Saddle Type Turret Lathe
                              Gisholt Model 3L Saddle Type Turret Lathe, 21.75" Swing Over Cross Slide, 28.5" Swing Over Bed, 51" Longitudinal Travel, 5" Through Hole, Pre-Select Head w/ 12 to 800-RPM Maximum, 20" 3-Jaw Chuck
                              • Chuck: 20"
                                Quincy Model QSVB-20 20 hp Rotary Screw Type Air Compressor
                                Quincy Model QSVB-20 20 hp Rotary Screw Type Air Compressor, Full Enclosure, 460 volt, 3-Phase, s/n: UN085449 (2007), Approx. 66" x 34" x 46" Overall.
                                • Motor: 20HP
                                  U.S. Clearing (Torq-Pac) OBI Punch Press. Eccentric Type, 60-Ton Capacity
                                  U.S. Clearing (Torq-Pac) OBI Punch Press. Eccentric Type, 60-Ton Capacity, 7" Stroke, 14 1/4" Shut Height to Bed, 3" Ram Adjustment, 30"x18 1/4' Bed Area, 13"x10 3/4" Ram Area, 2 1/4&quo
                                  • Tonnage: 60T
                                  • Stroke: 7"
                                    Chevalier FSG-1228AD Automatic Surface Grinder
                                    Chevalier FSG-1228AD Automatic Surface Grinder, 27-1/2" x 12" Electromagnetic Chuck, 28" Max Grinding Length, 12" Max Grinding Width, 14-3/4" Max Table to Spindle Center, Coolant Tank, Hydraulic
                                    • Table width: 12"
                                    • Table length: 28"
                                      Location:
                                      • X Minnesota (174)
                                      Price:
                                      •  to 
                                      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9