buy & sell, new & used machinery, machine tools & equipment

<Prev | 231 | 232 | 233 | 234 | 235 | 236 | 237 | 238 | 239 | 240 | Next>
Refine: Viewing 11701 - 11750 of 19776 matches
Sort by:
Items Per Page:  20 |  50  |  100
1999 Superior, 6-5-5000, 1000 HP, 150 psi
Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
1999 Superior, 6-5-5000, 1000 HP, 150 psi
Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
1972 Cleaver-Brooks, CB-200-250, 250 HP, 30 psi
Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
1972 Cleaver-Brooks, CB-200-250, 150 HP, 30 psi
Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
1/2" AOT 2 Die 2 Blow Cold Header
No description providedMaximum Cutoff Diameter12mm (1/2") Maximum Cutoff Length120mm PKO Stroke24mm Maximum Production160 PPM Approx. Floor Size14'L x 6-1/2'W Approx. Weight35,000 lbs Heading Tonnage120 Ton (Metric) 132
MATTISON 36X8FT
COMING SOON
MATTISON 24X8FT
COMING SOON
KALAMAZOO 1220D
KALAMAZOO 1220D
Ingersoll Rand 2545
T-30 Ingersoll Rand 2545 series is a heavy duty air compressor mounted on a large ASME horizontal air tank complete with drain valve and safety valve factory mounted. The cast iron pump is rated for 35 CFM and a factory
Curtis Teledo Air compressor
6 1/4 & 3 3/8 BORE TWO STAGE COMPRESSOR MINIMUM SPEED - 400 RPM
MORI SEIKI NHX5000 CNC HORIZONTAL MACHINING CENTER (2012)
MORI SEIKI NHX5000 CNC HORIZONTAL MACHINING CENTER (2012)
  • X axis: 28.7"
  • X axis: 28.7"
  • Y axis: 28.7"
    BROTHER TC-32B QT, 5-AXIS CNC TAPPING CENTER
    X-AXIS TRAVEL........................... 21.7" Y-AXIS TRAVEL........................... 15.7" Z-AXIS TRAVEL........................... 16.3" DISTANCE BETWEEN TABLE TOP AND SPINDLE END NOSE.. 25.4" PALLET WORK AREA SI
    700 TON USI CLEARING HYDRAULIC PRESS Model HO-700-96-60
    Housing type Single action with 150 ton bed cushion Distance between positive slide stops: 97" L-R Area of bed (nominal): 97" L-R x 60" F-B Bed bolster: 96" L-R x 60" F-B x 10"
    • Tonnage: 700T
    • Tonnage: 700T
    • Stroke: 700"
      TOYODA MODEL FA630 CNC HORIZONTAL MACHINING CENTER
      Catalogue Specifications Pallet Size: 24.8" x 24.8" Indexing: 1 Degree Number of Pallets: 2 X-Axis Travel: 39.37" Y-Axis Travel: 33.46" Z-Axis Travel: 29.52" Spindle Speed: 6,000 RPM
      • X axis: 39.37"
      • X axis: 39.37"
      • X axis: 39.37"
        C.R. ONSRUD 122C18 SUPER DUTY CNC ROUTER
        “Super Duty Series” CNC Router 5 x 10 (Twin 5 x 5 foot tables), OSAI PC Front Series 10/510i controller; Automatic Lubrication; 12 position tool changer, Aggregate 13th position tool holder, Nine Spindle Drill
        SNK HPS 120B/5 Profiler CNC Horizontal Machining Center
        Spindle: • Spindle Speed: 15,000 RPM • Spindle Taper: 50 Taper • Spindle Motor: 50 HP Spindle Head Tilt: • A-Axis: 45 Degrees • C-Axis: 270 Degrees Feedrate: • X,Y,Z axes: 1 to 393 IPM • A,C axes: 0 to 1800 DPM
        • X axis: 124"
        • X axis: 124"
        • X axis: 124"
          MAZAK CNC MULTIPLEX 6200Y WITH GANTRY LOADER
          SPECIFICATIONS Max Swing Diameter..................................12.50 In Standard Cutting Diameter.........................10.24 In Max Cutting Diameter for Bar Work............2 In Distance Between Spindles at Ho
          EmcoTurn 420 Multi Axis CNC Turning Center
          Specification Description # Axis: 4 Bar Capacity: 1.02 " Power: 12 hp Turning Dia: 6.1 " Swing: 13.38 " Control: Siemens 840D Dimensions: 86.7" x 59" x 86.7" Weight: 5,720 Lbs Equipped With: Full
          • Swing: 13.38"
          • Swing: 13.38"
          • Centers: 13.38"
            CR Onsrud 5' x 12' 3 Axis CNC Router (2006)
            Description: 5' x 12' vacuum table 16 HP spindle 3 Vacuum zones 12-position tool changer (3) Becker vacuum pumps on a stand Extra Collets and Chucks Voltage: 440V, 60Hz, 3Ph
            MORI SEIKI, NH5000DCG/40
            SPECIFICATIONS: PALLET SIZE: 19.7" X 19.7" MACHINE WEIGHT: 28,380 LBS. TRAVELS: --X: 28.70" --Y: 28.70" --Z: 33.50" DISTANCE FROM SPINDLE CENTER TO TOP OF PALLET: 3.90" - 32.70" DISTANCE FROM SPINDLE NOSE
            • X axis: 28.7"
            • X axis: 28.7"
            • X axis: 28.7"
              12" Delta Radial Arm Saw
              See photos for details. Saw is located in Newtown, CT
              13 stand Bar mill, SCR drives, H/V stands, cooling bed, complete
              Billet/bloom reversing breakdown mill, with 12 horizontal / vertical rolling mill stands, shears, cooling bed, complete with all SCR type controls, spare rolls, spare parts, ready to run!
              40 HP, Zenar, AC, crane duty, fr. 365US, 1200 rpm, 230/460/3/60
              40 HP, 1200 rpm, AC 230/460/3/60, 60 minute cont. duty, crane duty, frame 365US, mfg. Zenar, will sell EOK or rebuilt & gauranteed
              • Motor: 40HP
                2500 ton Open Die, Forging Press, Birdsboro, 30" stroke, down acting
                2500 ton open die, hot forging press, mfg. Birdsboro, 30" stroke, down acting, water hydraulic, can be converted to oil hydraulic
                • Tonnage: 2500T
                • Stroke: 30"
                  20,000# x 48" wide, Loopco "L" type coil car
                  20,000# x 48" wide, Loopco coil car, "L" type design, self contained powered raise/lower and travel, good running condition
                  48" x 20,000# Loopco uncoiler, hyd. expansion, slide base, air brake
                  48" wide x 20,000# capacity, mandrel type uncoiler, mfg. Loopco, 20" to 24" hydraulic expanding mandrel, slide base, Wichita air brake, good running condition! (no snubber arm)
                  • Maximum weight capacity: 20000Lb
                  • Maximum coil width: 48"
                    MAZAK e500HS series II INTEGREX MULTI-TASKING TURNING CENTER
                    Specifications Maximum swing over bed: 32.28" Maximum swing over carriage: 32.28" Maximum machining diameter: 32.28" Maximum distance between centers: 1
                    • Swing: 32.28"
                    • Centers: 120"
                      NTC TLM-610 (2014)
                      The TLM Series of 5-axis laser cutting systems simplifies the processing of 3-dimensional workpieces to perform any number of cutting tasks. Run programs from G code or an NTC-developed simplified coding process. A simpl
                      • Wattage: 3300W
                      • X axis travel: 10'
                        Sunstrand/Arter Grinder
                        Sunstrand Rotary Surface Grinder 9" Height Under Wheel Convex & Concave Tilt of work table
                        BRIDGEPORT 3 AXIS SERIES I CNC VERTICAL MILL (1984)
                        TABLE SIZE ----- ( OVERALL ) -------------- 16-1/8" X 42" TABLE SIZE ----- ( WORKING SURFACE ) ------ 12-1/2" X 34" TABLE POSIITONING SPEED ------------------- 250 IPM TABLE TRAVEL --- ( X-AXIS ) ------------
                        • Table width: 12.5"
                        • Table length: 34"
                          MacAir HX100A Refrigerated Air Dryer
                          MacAir HX100A Refrigerated Air Dryer 100 scfm air capacity 115-230/60/3 voltage, ½ Hp Ref. Comp. 1-1/2” NPT air inlet & outlet R134a Freon With Pre Air filter
                          KURAKI KBT-13A CNC (1998)
                          SPECIFICATIONS: SPINDLE BAR 5.12" SPINDLE TAPER ISO 50 SPINDLE MOTOR HP APPROX. 30 HP TRAVELS: X AXIS 118" Y AXIS 78.74" Z AXIS 51" W AXIS TRAVEL 27.56" TABLE SIZE 65" X 72" T-SLOTTED 60 POSITION AUTOMATIC TOOL
                          Famco Model 6H520 hydraulic power squaring shear 16GA mild steel
                          Used Famco model 6H520 hydraulic power squaring shear 16 GA mild steel. 52" cut Used to cut laminate. Serial # HS-06885186. was $15,500 new.
                          • Maximum thickness: 16Ga
                          • Cutting length: 52"
                            OKUMA MA-400HA HMC (2009)
                            Pallet Size 15.75" (2) Travel: X-Axis 22.05" Y-Axis 24.01" Z-Axis 24.61" Pallet Index .001 Degrees Spindle Speed 50 - 15,000 RPM Spindle Taper Cat 40 Spindle Motor 20 / 15 HP Spindle Center to
                            • X axis: 22.05"
                            • Y axis: 24.01"
                              Blanchard 22K 42
                              Chuck Size 42" Diameter Range 48" Chuck Pole Spacing 5/8" Chuck Center Hole 2" Grinding Wheel 22"
                              Blanchard 18-36
                              Table Chuck Diameter - 36" Max Swing Inside Guard - 40" Segmented Wheel Diameter - 18" Max Work Height Under Wheel - 11"
                              • Chuck: 36"
                                Blanchard 42-84
                                Range: 85" Diameter x 24" High Wheel: 42" Segmented Swing Inside Guards: 86" Maximum Height Under Wheel w/New Segments: 24"
                                Boyar Schultz H618
                                Table longitudinal travel: 19-7/8" Table cross feed: 6-13/16" Maximum work height under wheel: 12-1/8" over table Maximum work height under wheel: 9-1/2" over chuck Work surface: 5-5/8" x 18"
                                • Table width: 5.63"
                                • Table length: 18"
                                  Devlieg 3H-72
                                  Spindle Size 3" Spindle Taper #40 Taper Spindle Speed 25-1,200 RPM Spindle Motor 10 HP Table Size 35" x 72" X-Axis Travel 72" Y-Axis Travel 36" Z-Axis Travel 16" W-Axis Travel 16" Machine Weight 32,900 lbs F
                                  • Spindle diameter: 3"
                                    Devlieg 4K-60
                                    Spindle Diameter: 4" Spindle Nose Taper: #50 (with Power Draw Bar) Spindle Travel: 48" - Vertical (Y-Axis) 20" - Horizontal (19) Spindle Speeds: 14 - 1450 RPM (16) Spindle Feeds: .0013 IPR - .167 IPR Table Size: 40
                                    • Spindle diameter: 4"
                                    • Vertical travel: 48"
                                      DoAll C-1213NC
                                      SPECIFICATIONS WIDTH 1 1/4" THICKNESS .042" LENGTH 12'
                                      DoAll TF-14H
                                      Horizontal Capacity 14' Vertical Capacity 21" Blade Dimensions (LxWxT) 171" X 1" X .035" Wheel Diameter 14" Table Height 38" Working Surface 36" x 27" Max. Vise Opening 14-1/2" Vise Height (Standard) 10" Main Dri
                                      Cordax RS-115 DCC
                                      Machine Specifications Maximum Height 20" Maximum Length 76" Maximum Width 47"
                                      Brown & Sharpe Global Performance 5 7 5
                                      Brown & Sharpe Global Performance 5 7 5
                                      Hurricane Systems/Midbrook 5018B - Wash-B/O Conveyor Washer
                                      Category: Continuous Type: Conveyor Washer Heated: Natural Gas Voltage: 480/3/60 Work Area: 18'W x 12"H - Work Opening External Dimensions: 7'W x 7'H x 15'L - Approx. Controls: Mounted and wired in an enclosure att
                                      Automated Finishing, Inc. PDW-49 4 Stage Conveyor Washer
                                      Category: Continuous Type: 4 Stage Conveyor Washer Heated: Electric Max. Temperature: N/A Voltage: 460/3/60/145 FLA Work Area: 21 -1/2"w x 15"h External Dimensions: 65"w x 96"h x 21'l Controls: Mounted and wired i
                                      250 TON MINSTER HEVI-STAMPER STRAIGHT SIDE PRESS (1980) MODEL: #E2-250-84-5
                                      SPECIFICATIONS: Capacity: 250 Tons Stroke: 12” Shut Height: 40” Slide adjustment: 6” Bed & Ram Area: 84” L-R x 50” F-B Speeds: 30 - 60 SPM Windows: Yes Equipped With: Minster Air Clutch & Brake Ai
                                      • Tonnage: 250T
                                      • Tonnage: 250T
                                      • Tonnage: 250T
                                        OKUMA & HOWA CNC Millac 630H (2005)
                                        EQUIPPED WITH: Fanuc 16IM CNC Control, Rigid Tapping, Helical Interpolation, Multiple Part Program Storage, 24.8" x 24.8" Pallets, Full 4th Axis Pallet Rotation, 80 Position Automatic Tool Changer, RS-232 Port, Full C
                                        • X axis: 40"
                                        • X axis: 40"
                                        • X axis: 40"
                                          250 TON VERSON SSDC PRESS MODEL: S2-250-96-48
                                          BED AREA: 96" x 48" SLIDE AREA: 96" x 48" STROKE: 12" SHUT HEIGHT: 30.5" ADJUSTMENT: 8" WINDOWS: 28" WIDE SPM: 25 OVERALL DIMEMSIONS: 19'8" H EQUIPPED WITH: 6" BOLSTER 52" FROM FLOOR TO TOP OF BOLSTER T-SLOTTE
                                          • Tonnage: 250T
                                          • Tonnage: 250T
                                          • Tonnage: 250T
                                            TSUGAMI BS-32C MARK III CNC SWISS TYPE LATHE (2006)
                                            GENERAL SPECIFICATIONS Control: Fanuc 18iTB Maximum Bar Diameter: 1 1/4" Z1-Axis Travel (synchronous to "Z2"): 9.75" Main Spindle: Spindl
                                            Price:
                                            •  to 
                                            <Prev | 231 | 232 | 233 | 234 | 235 | 236 | 237 | 238 | 239 | 240 | Next>