buy & sell, new & used machinery, machine tools & equipment

<Prev | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | Next>
Refine: Viewing 5301 - 5350 of 19764 matches
Sort by:
Items Per Page:  20 |  50  |  100
QUINCY 50 HP ROTARY SCREW AIR COMPRESSOR
$RFQ
QUINCY 50 HP ROTARY SCREW AIR COMPRESSOR
50 HP FIXED SPEED ROTARY SCREW COMPRESSOR RATED 226 ACFM. @ 100 PSI. PURCHASE NEW 2016 NEVER USED.
  • Motor: 50HP
    ROLLER CONVEYOR OVEN, FB SERIES, 4'W 8'L 56"H, 500 F GAS
    $RFQ
    ROLLER CONVEYOR OVEN, FB SERIES, 4'W 8'L 56"H, 500 F GAS
    DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. INTERIOR HAS A GRAVITY ROLLER CONVEYOR. HEAT IS SUPPLIED BY A GAS BURNER FIRING INTO A PROTECTED CHAMBER ABOVE WORK AREA AND CIRCULATED BY (2) ROOF M
    • Chamber width: 48"
    • Chamber length: 96"
      VACUUM FURNACE, SURFACE COMBUSTION 36"W 48"L 24"H, 1350 F
      $RFQ
      VACUUM FURNACE, SURFACE COMBUSTION 36"W 48"L 24"H, 1350 F
      HORIZONTAL DOUBLE WALLED WATER COOLED CHAMBER WITH SINGLE SIDE SWING BOLT DOWN FRONT DOOR. WHEN PROCESS BEGINS VACUUM PUMPS EVACUATE THE VESSEL. WHEN COMPLETE VESSEL IS BACK FILLED WITH NITROGEN. HEAT IS
      • Chamber width: 36"
      • Chamber length: 48"
        CAR BOTTOM FURNACE, BEAVERMATIC, 1500 F GAS 7'W 10'L 7'H
        $RFQ
        CAR BOTTOM FURNACE, BEAVERMATIC, 1500 F GAS 7'W 10'L 7'H
        HEAT (4,100,000 BTU/HR MAX TOTAL 5-7 PSI) IS SUPPLIED BY (9) NOZZLE MIX BURNERS WITH SPARK IGNITION AND FLAME SAFETY FIRING FROM ABOVE AND BELOW WORK AREA.. INTERIOR IS LINED WITH LIGHT WEIGHT REFRACTORY. CAR IS ELECTR
        • Chamber width: 84"
        • Chamber length: 120"
          VACUUM FURNACE, SECO WARWICK BOTTOM LOAD 48"DIA 48"H 2200 F
          $RFQ
          VACUUM FURNACE, SECO WARWICK BOTTOM LOAD 48"DIA 48"H 2200 F
          BOTTOM LOAD VERTICAL VACUUM FURNACE WITH METALLIC HOT ZONE AND HEATING ELEMENTS HAVING CAPACITY OF: 1000 LBS @ 1000C. HEATING ELEMENTS ARE MOUNTED IN FLOOR BELOW HEARTH,ON ROOF & SIDE WALL. POWER TO HEATING ELEM
          • Chamber width: 48"
          • Chamber length: 48"
            USED PIRANHA 140 TON HYDRAULIC SINGLE END PUNCH MODEL SEPP-140, Stock# 11037, Year: 1996
            $RFQ
            USED PIRANHA 140 TON HYDRAULIC SINGLE END PUNCH MODEL SEPP-140, Stock# 11037, Year: 1996
            Brand: PiranhaModel: SEPP-140Specifications:&nbsp;Tonnage: 140 tonsThroat depth: 20.5"Platen size: 36" x 16"Open height: 14"Closed height: 7-3/4"Stroke length: 7"Strokes per minute: 24 @ 1"Main motor: 20 H.P.Voltage:
            USED PIRANHA 120 TON HYDRAULIC IRONWORKER MODEL P-120, Stock# 11036, Year: 2004
            $RFQ
            USED PIRANHA 120 TON HYDRAULIC IRONWORKER MODEL P-120, Stock# 11036, Year: 2004
            Brand: PiranhaModel: P-120Specifications: Tonnage: 120 tonsThroat depth: 12"Round bar: 1/2" - 2"Square bar: 1/2" - 1-3/8" (blades not included)&nbsp;Plate shear: 20" x 1/2", 18" x 3/4", 12" x 1"Angle shear: 6" x 6" x
            ShopSabre sidekick 10
            $20,000
            ShopSabre sidekick 10
            pretty much brand new shop sabre only ran about 4 sheets on the moving shops and need to down size. see listing for more details https://www.facebook.com/marketplace/item/275329715073839/
            H Lioho LH-1 1/2 Arlington Milling Machine
            $4,800
            H Lioho LH-1 1/2 Arlington Milling Machine
            Type: Vertical Table: 9" x 42" Spindle: R8 Automatic feed: X Axis HP: 1.5 Dimensions: 56" x 58" x 82"
            Oster 716
            $8,900
            Oster 716
            Swing over bed: 20" Spindle bore: 7-1/2" Between centers: 18" HP: 5 Voltage / Phase: 440 / 3 Weight: 3,550 lbs Dimensions: 28"x 79" x 57" Capacity: Tube: 1" to 6", Screw: 1&
            Pines Engineering Co. 11015-64033 Tube Bender
            $6,500
            Pines Engineering Co. 11015-64033 Tube Bender
            Type: Hydraulic Bending radius: 180° Dies: Square 3/4" HP: 5 Voltage / Phase: 220 | 3 Dimensions: 39" x 148" x 40" Capacity: 1-1/2"
            Pullmax E 23D Shear
            $22,500
            Pullmax E 23D Shear
            Type: Hydraulic Backgauge: Motorized HP: 15 :: Phase: 3 Year: 1985 Dimensions: 90" x 138" x 83" Capacity: 10' x 1/4"
            Okamoto PSG-64 Grinder
            $10,500
            Okamoto PSG-64 Grinder
            Type: Hydraulic Grinding wheel size: 9-1/2" Table: 16" x 31" Year: 1981 Voltage / Phase: 220 | 3 Dimensions: 93" x 71" x 76"
            • Maximum gear diameter: 9.5"
              BLANCHARD ROTARY SURFACE GRINDER
              $3,950
              BLANCHARD ROTARY SURFACE GRINDER
              18" WHEEL
              • Chuck: 32"
                GMC GMM-949VPKG 9 x 49 in. Vertical Metal Mill w/2-Axis DRO
                $RFQ
                GMC GMM-949VPKG 9 x 49 in. Vertical Metal Mill w/2-Axis DRO
                CALL 386-304-3720 FOR AVAILABILITY FEATURES: Our 9" x 49" metal milling machine aka vertical milling machines come fully equipped with a SINO digital readout and power feed. Our mill machines are rigid, mad
                USED COPPER / NICKEL / CHROME MANUAL DIP PLATING LINE, Stock# 11038
                $RFQ
                USED COPPER / NICKEL / CHROME MANUAL DIP PLATING LINE, Stock# 11038
                Used copper / nickel, chrome manual dip plating lineMachine sold As-Is Where-IsAvailable as a turn-key operation including the industrial building located in the metropolitan Detroit area.&nbsp;&nbsp;
                Baileigh CNC Press Brake BP-3305CNC
                $13,500
                Baileigh CNC Press Brake BP-3305CNC
                Used-Like New Shipping not included Need high production in a limited space? This CNC press brake offers programmable controls, top-quality components, and heavy steel construction for an unbeatable price. Deliver
                • Tonnage: 33T
                  METALPRO 50 Ton Ironworker MP5000FS
                  $RFQ
                  METALPRO 50 Ton Ironworker MP5000FS
                  CALL 386-304-3720 FOR AVAILABILITY FEATURES: The machine is ready with die holder, stripper, and punch retaining nut. The punch station can be used with a range of notchers, custom shape punching, and forming ope
                  METALPRO 45 Ton Ironworker MP4500FS
                  $RFQ
                  METALPRO 45 Ton Ironworker MP4500FS
                  CALL 386-304-3720 FOR AVAILABILITY FEATURES: The machine is ready with die holder, stripper, and punch retaining nut. The punch station can be used with a range of notchers, custom shape punching, and forming ope
                  METALPRO 40 Ton Ironworker MP4000FS
                  $RFQ
                  METALPRO 40 Ton Ironworker MP4000FS
                  CALL 386-304-3720 FOR AVAILABILITY FEATURES: The machine is ready with die holder, stripper, and punch retaining nut. The punch station can be used with a range of notchers, custom shape punching, and forming operati
                  USED HYD-MECH 18" X 29" AUTOMATIC VERTICAL TILT FRAME BANDSAW MODEL V-18APC, Sto
                  $RFQ
                  USED HYD-MECH 18" X 29" AUTOMATIC VERTICAL TILT FRAME BANDSAW MODEL V-18APC, Sto
                  Brand: Hyd-MechModel: V-18APCSpecifications:&nbsp;Capacity @ 90 degrees: 18"w X 29"tCapacity @ 45 degrees: 18"w X 21"tMitering capability: 45 degrees left and rightBlade dimensions: 1-1/4" x .050" x 16'11"Blade drive
                  USED FABRILINE 4" X 4" X 3/8" HYDRAULIC ANGLE SHEAR MODEL FAS 44, Stock# 10
                  $RFQ
                  USED FABRILINE 4" X 4" X 3/8" HYDRAULIC ANGLE SHEAR MODEL FAS 44, Stock# 10
                  Brand: FabrilineModel: FAS 44Specifications:&nbsp;Tonnage: 35 tonsMaximum stroke: 2-1/8"Cycle time: 6 seconds&nbsp;Angle capacity: 4" x 4" x 3/8"Voltage: 220 / 440 volt 3 phaseWeight: 400 lbs.Equipped with:&n
                  Amada LCG-3015 3500 Watt CNC Laser
                  $RFQ
                  Amada LCG-3015 3500 Watt CNC Laser
                  Power Output 3500 Watts Resonator Position Accuracy
                  Kira VTC30E CNC Drilling and Tapping Center
                  $RFQ
                  Kira VTC30E CNC Drilling and Tapping Center
                  X-Axis Travel 300mm / 11.8” Y-Axis Travel (Tangential)
                  ¾” x 30” ElDorado/Mega Model M-75-1041 Precision Deep Hole Gun Drill
                  $RFQ
                  ¾” x 30” ElDorado/Mega Model M-75-1041 Precision Deep Hole Gun Drill
                  Maximum Drilling Diameter 0.75 inches Minimum Drilling Diameter
                  Fadal VMC-4020HT CNC Vertical Machining Center 2005
                  $RFQ
                  Fadal VMC-4020HT CNC Vertical Machining Center 2005
                  Fadal VMC-4020HT CNC Vertical Machining Center 2005 SN/ 032005108265 Table Size: 47.94” x 20” Rapid Traverse Rate (X/Y): 700 in/min Rapid Traverse Rate (Z
                  FADAL 3016HT VERTICAL MACHINING CENTER
                  $RFQ
                  FADAL 3016HT VERTICAL MACHINING CENTER
                  FADAL 3016HT VERTICAL MACHINING CENTER Year: 1994 S/N 9406486 TABLE SIZE 39" x 16" TABLE CAPACITY 2,730 LBS. RAPID FEEDS 750 IPM X-AXIS TRAVEL 30" Y-AXIS
                  MORI SEIKI MV-65/50
                  $8,950
                  MORI SEIKI MV-65/50
                  FANUC 11M CONTROL, 50 TAPER, 30 ATC, 6000 RPM
                  • X axis: 50"
                  • Y axis: 26"
                    CNC 5-AXIS MACHINING CENTRE HERMLE C30 U 2007
                    $RFQ
                    CNC 5-AXIS MACHINING CENTRE HERMLE C30 U 2007
                    CNC 5-AXIS MACHINING CENTRE HERMLE C30 U 2007 Specifications Axis X 650 mm Axis Y 600 mm Axis Z 500 mm Type Vertical CNC Siemens 840 D mit ShopMill Type of axis Universal head Table length 6
                    OKK Model PCV-55 CNC Vertical Machining Center, 2000
                    $RFQ
                    OKK Model PCV-55 CNC Vertical Machining Center, 2000
                    OKK Model PCV-55 CNC Vertical Machining Center, 2000 s/n 387, Mitsubishi Meldas 500 CNC Control, 50 Taper, 20 ATC, 30 HP, 8,000 RPM, 48” X 22” Table, 40” X 22” X 20” Travels
                    Miter Saw 12" Cmpd Sld DB DW
                    $374
                    Miter Saw 12" Cmpd Sld DB DW
                    Miter Saw 12" Cmpd Sld DB DW Model: DW718 [DeWalt] S/N: 282634 Dual Compound Sliding Miter Saw 15Amp; 1Ph; 120Volt
                    USED KEINS 1-3/4" 3-AXIS CNC DUAL STACK TUBE BENDER MODEL KB-45ND, Stock# 11035, Year
                    $RFQ
                    USED KEINS 1-3/4" 3-AXIS CNC DUAL STACK TUBE BENDER MODEL KB-45ND, Stock# 11035, Year
                    Brand: KeinsModel: KB-45NDSpecifications:&nbsp;Thin wall metal capacity: 1.77" x .07" wall (45mm x 2mm)Thick wall metal capacity: 1.68" x .1" wall (42.7mm x 2.6mm)Aluminum capacity: 2" x .07" wall (50.8mm x 2mm)Stain
                    2006 MAKINO U32J WIRE EDM
                    $19,500
                    2006 MAKINO U32J WIRE EDM
                    VERY LOW HOURS, UNDER POWER, NOT BEING USED
                    • X axis travel: 14.5"
                    • Y axis travel: 10.6"
                      1999 Femco Horizontal Boring Mill Model BMC-110 R1 - Fanuc 18-M
                      $35,000
                      1999 Femco Horizontal Boring Mill Model BMC-110 R1 - Fanuc 18-M
                      1999 Femco Horizontal Boring Mill Model BMC-110 R1 Specifications: Table Size 44″ x 49″ (8,819 lbs. cap.) Table Longitudinal Travel (X Axis) 55″ Vertical Travel (Y Axis) 47.25" Travel (W Axis) 43.30"
                      • Spindle diameter: 8.86"
                      • X axis travel: 55"
                        1998 - 28 Ton Finn Power F5-25FB CNC Turret Punch
                        $RFQ
                        1998 - 28 Ton Finn Power F5-25FB CNC Turret Punch
                        Capacity 28 Tons Material Thickness .31" Maximum Sheet Size w/o reposition 4' x 8' Max Sheet Weight 441 lbs. Max Hole Diameter 3.5" Travels X Axis 102" Travels Y Axis 52" Axis Speed 295
                        • Tonnage: 28T
                          USED RAMCO 37" WIDE BELT WET SANDER MODEL 37T, Stock# 11033, Year: 2005
                          $RFQ
                          USED RAMCO 37" WIDE BELT WET SANDER MODEL 37T, Stock# 11033, Year: 2005
                          Brand: RamcoModel: 37TSpecifications:&nbsp;Belt size: 37"w X 60" aroundMax material thickness: 6"Main motor: 20 H.P.Belt speed: 0 - 80 FPM (frequency drive)Belt tension: Pneumatic&nbsp;Voltage: 480 volt 3 phaseEq
                          USED AKER WADE TWINMAX 30 DUAL FAST BATTERY CHARGER, Stock# 11020, Year: 2012
                          $RFQ
                          USED AKER WADE TWINMAX 30 DUAL FAST BATTERY CHARGER, Stock# 11020, Year: 2012
                          Brand: Aker WadeModel: Twinmax 30Specifications:&nbsp;Maximum power output: 60 KWMaximum power output per station: 30 KWMaximum output current per station:@ 24V: 500 amps@ 36V: 500 amps@ 48V: 500 amps@ 80V: 300 ampsA
                          USED AKER WADE TWINMAX 30 DUAL FAST BATTERY CHARGER, Stock# 11019, Year: 2012
                          $RFQ
                          USED AKER WADE TWINMAX 30 DUAL FAST BATTERY CHARGER, Stock# 11019, Year: 2012
                          Brand: Aker WadeModel: Twinmax 30Specifications:&nbsp;Maximum power output: 60 KWMaximum power output per station: 30 KWMaximum output current per station:@ 24V: 500 amps@ 36V: 500 amps@ 48V: 500 amps@ 80V: 300 ampsA
                          ACRA 1440B 14x40 in. Precision Engine Lathe
                          $RFQ
                          ACRA 1440B 14x40 in. Precision Engine Lathe
                          CALL 386-304-3720 FOR AVAILABILITY FEATURES: *Hardened and ground bed ways *16 speeds all geared headstock *3 HP (2.4kW) three phase motor *Foot brake giving rapid braking *Emergency stop button equipped on the f
                          • Swing: 14"
                          • Centers: 40"
                            AUTOMATIC EDGEBANDER MACHINE
                            $2,500
                            AUTOMATIC EDGEBANDER MACHINE
                            Holzher GENESIS 1435 SE Edge Banding Machine. 230v 3phase. We downsize our warehouse and in need of space. All offers will be considered. Needs to be picked up. Never gave any problems until relocating into a single ph
                            USED CINCINNATI 1/4" X 10' HYDRAULIC SHEAR WITH CNC FRONT AND REAR GAUGING MODEL 250H
                            $RFQ
                            USED CINCINNATI 1/4" X 10' HYDRAULIC SHEAR WITH CNC FRONT AND REAR GAUGING MODEL 250H
                            Brand: CincinnatiModel: 250HS 10Specifications:&nbsp;Capacity: 26 gauge - 1/4"Cutting length: 10'2"Max rake: 3/8" per footHold down force: 8.5 tonsNumber of hold downs: 12Height under guard: 1/2"Back gauge range: 48"
                            USED CINCINNATI 350 TON X 12', "PROFORM" SERIES 5-AXIS CNC HYDRAULIC PRESS BRAKE
                            $RFQ
                            USED CINCINNATI 350 TON X 12', "PROFORM" SERIES 5-AXIS CNC HYDRAULIC PRESS BRAKE
                            Brand: CincinnatiModel: 350PF10Specifications:&nbsp;Tonnage: 350 TonsLength of bed: 12'Distance between housings: 10'6"Stroke length: 16"Throat depth: 10"&nbsp;Open height: 24"Shut height: 8"Distance from floor t
                            USED PIRANHA P-3 50 TON HYDRAULIC IRONWORKER, Stock# 11027, Year: 1990
                            $RFQ
                            USED PIRANHA P-3 50 TON HYDRAULIC IRONWORKER, Stock# 11027, Year: 1990
                            Brand: PiranhaModel: P-3Specifications:Angle Shear at 90 deg: 5" x 5" x 3/8"&nbsp;Number of Built-In Work Stations: 5Punching: 1" thru 1/2" thick materialPunch Tonnage: 50 tonsPlaten Size: 10" x 17"&nbsp;Throat D
                            USED DONALDSON TORIT 4,000 CFM DUST COLLECTOR MODEL DFT2-8, Stock# 11021, Year: 1996
                            $RFQ
                            USED DONALDSON TORIT 4,000 CFM DUST COLLECTOR MODEL DFT2-8, Stock# 11021, Year: 1996
                            Brand: Donaldson ToritModel: DFT2-8Specifications:Number of filters: 8Filter area: 2,032 sq. ft.&nbsp;Number of valves: 4Seismic rating: Zone 4Wind load: 100 MPHCompressed air: 90 - 100 PSICFM: 4,000 @ 10" static pre
                            New ELGi Skid Mounted Air Compressor
                            $25,500
                            New ELGi Skid Mounted Air Compressor
                            New, never used ELGi DS185T4F 185cfm, 49hp Stored indoors 0 Hours Delivery Available
                            • Motor: 49HP
                              Cincinnati 3 Spindle 5 Axis High Speed Gantry Profiler
                              $RFQ
                              Cincinnati 3 Spindle 5 Axis High Speed Gantry Profiler
                              Cincinnati 3 Spindle 5 Axis High Speed Gantry Profiler Stock #: 20204-IS Serial No.: 4320-C0197-0010 Year: 1999 Specifications: X Axis Travel 1,330" Y Axis Travel 104" Z Axis Travel
                              • X axis: 1330"
                              • Y axis: 104"
                                BIRMINGHAM H-6010 5 ft x 10 ga. Deluxe Hydraulic Shear
                                $RFQ
                                BIRMINGHAM H-6010 5 ft x 10 ga. Deluxe Hydraulic Shear
                                CALL 386-304-3720 FOR AVAILABILITY FEATURES: Spring hold downs Two 24" front support arms 24" manual back gauge with wheel Safety full length finger guard High grade, high carbon / c
                                • Maximum thickness: 10Ga
                                • Cutting length: 61"
                                  USED CLARK 6,000 LB ELECTRIC FORKLIFT MODEL ECX 30, Stock# 11017, Year: 2014
                                  $RFQ
                                  USED CLARK 6,000 LB ELECTRIC FORKLIFT MODEL ECX 30, Stock# 11017, Year: 2014
                                  Brand: ClarkModel: ECX 30Specifications:&nbsp;Load capacity: 6,000 Lbs.&nbsp;Power unit: 36 VoltTire type: Cushion non markingMaximum lift height: 189"Fork length: 60"Service weight: 8,743 Lbs.&nbsp;Equipped
                                  Studer Favorit CNC Grinder, 2017
                                  $RFQ
                                  Studer Favorit CNC Grinder, 2017
                                  Used Studer Favorit Cylindrical Grinder Year 2017 Max Swing 14" Center Height 6.9" Center Distance 39.4" Max Weight 330 lbs B-Axis Manual 0/15/30 X Axis Travel 114.6" Z Axis Travel 45.3&quo
                                  • Swing: 14"
                                  • Centers: 39.4"
                                    USED WHITNEY HYDRAULIC CNC 40 TON PUNCH 130 AMP PLASMA MODEL 657, Stock# 11028, Year: 2012
                                    $RFQ
                                    USED WHITNEY HYDRAULIC CNC 40 TON PUNCH 130 AMP PLASMA MODEL 657, Stock# 11028, Year: 2012
                                    Brand: WhitneyModel: 657Specification:&nbsp;Punching force: 40 tonsX-axis travel: 81.77"Y-axis travel: 50.59"Nominal distance between punch and torch: 15"Rapid speed: 1,000 IPMStroke rate: 80 SPM @ 1" centersPunch cy
                                    Categories:
                                    Condition:
                                    Manufacturer:
                                    Location:
                                    Price:
                                    •  to 
                                    <Prev | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | Next>