Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

$RFQ

STOCK NO. 903379002, SN MC240015U, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#71 • ELECTRONICS CABINET FOR FiFi SYSTEM

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#63 • MILLER DIMENSION 652 DC WELDER

$RFQ

SN MC240018U, STOCK NO. 903379002, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778 NOTE: Lots 63-70 are all Miller 652 DC Dimension Welders

Livingston, LA
View Listing

#47 • 2 TON SHIP CRANE

$RFQ

APPROX 258” BOOM LENGTH, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#48 • RESCUE BOAT

$RFQ

v

Livingston, LA
View Listing

#28 • CAT C18 MARINE GENSET

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#37 • WELIN LAMBIE FRC LAUNCHING DAVIT CRANE

$RFQ

TYPE SARB10A, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#27 • CAT C18 MARINE GENSET

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

CAT 3516 MARINE DIESEL ENGINE

$RFQ

ABS CERTIFIED. LESS THAN 20K HOURS. LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#20 • LOT OF 2 SIEMENS MASTER DRIVES

$RFQ

690V 1810A WATER COOLED VFD ABS CLASSED, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#25 • CAT 3516 MARINE DIESEL ENGINE

$RFQ

ABS CERTIFIED, LESS THAN 20K HOURS. LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

AGIETRON HYPERSPARK 2 EX HS, Agievision Cont. MFG. 2006

$RFQ

WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. TABLE AREA: 17.72” x 23.62” TRAVELS: X-13.78” Y-9.84” Z-13.78” MAX WORKPIECE LENGTH: 25.59 MAX WORKPIECE WIDTH:

Hamel, MN
View Listing

HARDINGE MODEL HSL-59 SPEED LATHE

$RFQ

WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. SPECIFICATIONS: Swing Over Bed: 9” Length of Bed from Face of Spindle: 10” Spindle Capacity: Round 5C collets: 1-1

Swing: 9"
Centers: 10"

Hamel, MN
View Listing

SCOTCHMAN SG3 3 in. Belt Grinder

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: *Industrial Parts Grinder with Built-In Dust Collection System for Efficient, Heavy-Duty Grinding. *The Scotchman SG3 is a 3" wide industrial belt grinder capable of

Belt width: 3"

Port Orange, FL
View Listing

12ga x 10' CNC Folding Machine

$75,000

STANDART SPECIFICATIONS AND ACCESSORIES • AC motorized drive of folding (Y, Z axis) • Servo motorized back gauge (X axe) • Eccentric Arm system with AC motor drive on clamping axe and direct AC drive on folding axe

Maximum thickness capacity: 12Ga
Bending length: 126"

Port Orange, FL
View Listing

3" Capacity CNC Tube/Pipe Bending Machine

$195,000

Technical Specifications: • Max. Tube Capacity: o Steel: 38mm x 2mm o Stainless Steel: 38mm x 1.5mm • Min. Tube Diameter: 8mm • Max. Steel Profile Capacity: 35mm x 35mm x 2mm • Max. Bending Angle: 190° • Bend

Maximum diameter: 3"

Port Orange, FL
View Listing

8x8x3/4 Gator Angle Shearing Punching Line

$325,000

SPECIFICATIONS Standard Min. Angle Size 2.20 x 2.20 x .157 in Max. Angle Size 8” x 8” x ¾” in Max. length of Finished Angle 40’ Punches per Side 3 Max. Punch 1” Max. Punch Tonnage 160 Max. Shear Tonnage (3

Port Orange, FL
View Listing

#16 - 2" G-Bar Rebar Bender

$9,900

Strength of Steel Piece BS 36 BS 45 BS 50 BS 60 45 kg/mm2 1 Ø 36mm Ø 45mm Ø 50mm Ø 60mm 2 Ø 20mm Ø 30mm Ø 32mm Ø 38mm 65 kg/mm2 1 Ø 32mm Ø 40mm Ø 45mm Ø 50m

Port Orange, FL
View Listing

3-in-1 Laser Welding Machine 3kw

$24,900

Fiber Laser Welding Machine Model LCW1500/2000/3000 Power(optional) 1500W, 2000W, 3000W Type Fiber Laser Welding & Cleaning & Cutting 3 in 1 Machine Machine Model LCW Series Laser Welding & Cleaning Cut

Power: 3KVA

Port Orange, FL
View Listing

CNC Variable Rake Hydraulic Guillotine Shear, 10' x 1/4", new

$65,000

STANDARD EQUIPMENT AND FEATURES Elgo P40T Touch Screen Colour Control Unit Automatically adjusted blade gap by CNC Automatically adjusted cutting length by CNC Automatically adjusted rake angle by CNC Back

Port Orange, FL
View Listing

13"x18" Semi Automatic Pivot Type Bandsaw 5hp

$22,000

CUTTING CAPACITY 0°: 6” +45°: 11” Main Drive Motor: 2.0 HP Hydraulic Motor: 5 HP Coolant Pump: 2 HP Cutting Speeds: 6 - 393.7 ft/min Band Dimensions: 1 x 1.1 x 0.035 in Working Height: 2” Weight: 1,4

Port Orange, FL
View Listing

Gator Combo 10'x40' Plate Processing Machine XPR300

$395,000

• Net Cutting Area: 10ft x 40ft • CNC Controller: ESA (Italy) • Power Source: Hypertherm XPR 300 with Core Gas Console (USA) • Nesting Software: Hypertherm ProNest (USA) including TrueHole™ technology • Drilling Modu

Port Orange, FL
View Listing

3" x 3" Angle Roll with Hydraulic Guide Rolls and NC Controller

$32,000

NEW 3-roll double pinch hydraulic angle roll, 3 x 3 capacity incl. NC controller, Hydraulic Guide Rolls, 3-YEAR WARRANTY, FOB Customer NC Controller + Hydraulic Guide Rolls • 7” Multi-Functional Touch Screen: Easy

Port Orange, FL
View Listing

10' x 1/2" 4-roll Hydraulic Plate Roll w NC Control

$96,000

NEW 4-roll double pinch hydraulic plate roll, 10' x 1/2" capacity incl. NC controller, 3-YEAR WARRANTY, FOB Customer NC-controller + - 10" Multi-Functional Touch Screen: Intuitive interface for easy o

Roll length: 122"
Thickness: 0.5"

Port Orange, FL
View Listing

12' x 250 TON Hydraulic CNC Press Brake

$119,000

STANDARD EQUIPMENT AND FEATURES 4-Axis: Y1, Y2, X, R Control Unit: Delem DA-58T Controller Back Gauge: X Axis with AC Motor Bottom Narrow Table Support Arm: Includes scale, T-Slot, and tilting stop. Top Tool Clampi

Tonnage: 250T

Port Orange, FL
View Listing

6kw, 5x10 Enclosed, Shuttle Laser Table - NEW

$195,000

NEW 5x10 6kw laser table Delivery, installation and training included! 2 years full warranty (parts and on-site service) Technical Parameters Max Working Area 5ft x 10ft X-axis Stroke 5ft Y-axis Strok

Wattage: 6000W

Port Orange, FL
View Listing

2004 STAR SB-16 SWISS TYPE SCREW MACHINE

$24,500

FANUC 18iTB, 10,000 RPM, 3 HP, C-AXIS, LNS HYDROBAR EXPRESS 220 BAR FEED, TRI-MIST MIST COLLECTOR,

Thousand Oaks, CA
View Listing

#121 • JET JVM-942 VERTICAL MILL

$RFQ

SN 8005299, LOCATED AT 1140 PETERS RD. HARVEY, LA 70058. CONTACT GUY JONES FOR MORE INFO AT 985-789-4389.

Livingston, LA
View Listing

2008 - 4000 Watt Amada LC3015F1NT CNC CO2 Laser

$RFQ

Wattage 4000 Watts Max Sheet Size 5' x 10' Max Material Weight 2000 lbs. Max Material Thickness Carbon Steel: 1.25", SS: 0.750", Aluminum: 0.500" X Axis Travel 121" Y Axis Travel 61"

Wattage: 4000W
X axis travel: 5'

SANTA ANA, CA
View Listing

12" x 14" Cosen C-300NC Automatic Horizontal Bandsaw, Taian PLC,

$RFQ

12" x 14" COSEN AUTOMATIC SCISSOR TYPE HORIZONTAL BAND SAW Model C-300NC, S/N C9913748, New 2010 Stock # Q11938 EQUIPPED WITH: Taian PLC Control, Fully Automatic Band Saw with Hydraulically Controlled Vis

Width capacity: 14"
Height capacity: 12"

Cincinnati, OH
View Listing

15" x 54" Leblond Makino Regal Servo-Shift Engine Lathe, Model 14

$RFQ

15" x 54" LEBLOND REGAL SERVO-SHIFT ENGINE LATHE Model 14C, S/N 14C 1007, New 1984 Stock # Q11994 EQUIPPED WITH: Hard and Ground Steel Bed Ways, Inch/Metric Threading, Thread Chasing Dial, 10" 3-Jaw

Swing: 15.5"
Centers: 54"

Cincinnati, OH
View Listing

Hardinge Bridgeport VMC1000p3 CNC Vert Machining Cntr, 44" x20" t

$RFQ

HARDINGE BRIDGEPORT VMC1000P3 CNC VERTICAL MACHINING CENTER Model VMC1000p3, S/N NVCA6G0090, New 2006 Stock # Q11951 EQUIPPED WITH: Fanuc Series 0i-MC CNC Control, RS-232 Port, 8000 RPM Spindle, Through Spindle Coo

X axis: 40.2"
Y axis: 20"

Cincinnati, OH
View Listing

2007 Fadal 6030 CNC Machining Center with Fanuc 18i Control, Thru Spindle C

$RFQ

2007 Fadal 6030 CNC Machining Center with Fanuc 18i Control, Thru Spindle Coolant and Chip Conveyor. Fadal 6030HT Vertical Machining Center Control: Fanuc 18i-MB5 62.5" x 30" Table Size 60" X - Tra

Livonia, MI
View Listing

Sonoruka 4,400 Lb. Servo Feed Line

$RFQ

Sonoruka 4,400 Lb. Servo Feed Line S/N: 3748, Mfg: 1991, Stock No: 18357 Model: UCW 1225 Uncoiler DLFW 3225 Servo Feed W/Leveler Capacity: 4,400 Lbs. x 9.84" (Per Side) Coil Width: 1.18" - 9.84&

Nashville, TN
View Listing

BINKS 500 F GAS WALK IN OVEN 500 F 48"W 72"L 72"H

$RFQ

GAS FIRED 500 F WALK IN OVEN. ID 4'WIDE 6'LONG 6'HIGH

Chamber width: 48"
Chamber length: 72"

Tolland, CT
View Listing

Geka Hydracrop 110 SD (2017) + Semipaxy 4000x500

$14,000

This is a 2017 LIKE NEW GEKA Hydracrop 110 SD punching and shearing machine. This unit also includes Semipaxy, which is CNC automation and positioning technology to punching of steel. This unit is equipped with programma

Milwaukee, WI
View Listing

2021 4000 Watt IPG SYS-4X4 LaserCube

$RFQ

Resonator Wattage 4,000 Max Sheet Size 4 ' x 4' X Axis Travel 48.25" Y Axis Travel 48.25" Vertical Stroke 2.9" Max. Speed 39"/Second Weight (approx.) 7,700# Dimensions 103"x87"

Wattage: 4000W
X axis travel: 4'

SANTA ANA, CA
View Listing

Yuasa ID Grinder and Jig Grinder with Monoset Attachment

$RFQ

New Yuasa G80 ID Grinder and Jig Grinder Mounted to Cincinnati Monoset Attachment We take trade ins of Monoset MT's only and stock most of the parts for these machines. We also Buy, Rebuild and Sell Pratt & Whi

Canton, OH
View Listing

2000 - 88 Ton Amada FBD-8025NT CNC Press Brake

$RFQ

Capacity 88 US Tons Overall Bending Length 98" Distance Between End Frames 86" Length of Stroke 5.91" Open Height 16.5" Throat Depth 15.7" No. of Axis 8 Fast Approach Speed 165 IPM Slow B

Tonnage: 88T

SANTA ANA, CA
View Listing

2001 - 33 Ton Amada Vipros 367 Queen CNC Turret Punch

$RFQ

Capacity 33 Tons Max Sheet Size 60 x 144' (w/repo) TravelsX Axis 72" TravelsY Axis 60" Max Table Speed (X/Y Combined) 2559/1968/3228 IPM Throat Depth 60" Max Sheet Thickness 1/4" Stroke 1.5

Tonnage: 33T

SANTA ANA, CA
View Listing

EDWARDS 55 Ton Ironworker w/Coper and Utimate Pro Package 230v, 3-ph

$16,995

CALL 386-304-3720 FOR AVAILABILITY Special Deal: $16,995 - Only 1 Available at This Price! IN STOCK NOW. FEATURES: *The Edwards 55 Ton Ironworker is well suited to fit the needs of any fab shop, large or small. Stan

Port Orange, FL
View Listing

2001 Fadal VMC-4020 Vertical Machining Center

$12,500

2001 Fadal Model VMC-4020 Vertical Machining Center Specifications: Table Size 48" x 20" (1,500 lbs. max.) X Axis Travel 40″ Y Axis Travel

X axis: 40"
Y axis: 20"

Hubbard, TX
View Listing

FEMCO BMC 110R2 CNC Horizontal Boring Milling & Drilling Machine New in

$RFQ

MODEL: BMC-110-R2 NEW: 1999 SPECIFICATIONS: TABLE SIZE.......................... 56.69" X 62.99" TABLE LOAD CAPACITY................. 13,900 LBS SPINDLE QUILL DIAMETER.............. 4.33" X-AXIS TR

Spindle diameter: 4.33"
X axis travel: 78.74"

Bedford, OH
View Listing

Est. 2019 Arrow-Slitter 1500 By Arrow Systems RTR#4082483-01

$250

Equipment located in Salem, OR. Est. 2019 Arrow-Slitter 1500 By Arrow Systems Inc. 15" Wide Table-Top Label Slitter All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspect

Salem, OR
View Listing

Accurpress 100 Ton x 12' Hydraulic Press Brake

$RFQ

Accurpress 100 Ton x 12' Hydraulic Press Brake S/N: 1614, Mfg: 1990, Stock No: 18354 Model: 710012 Capacity: 100 Tons Overall Bed Length: 144" Distance Between Housings: 126" Stroke: 8" Open He

Tonnage: 100T

Nashville, TN
View Listing

HM MACHINERY HM 1300 2n1 4 ft x 20 ga. Combo Brake

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery 1300 2n1 Combo Brake is the perfect way to get maximum versatility in a manual brake. This combo package includes 2 different interchangeable tooling sec

Port Orange, FL
View Listing

HM MACHINERY HM HS-3S-3SH 4 ft x 12 ga. Universal Manual Brake

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HS-3S-3SH Universal Manual Brake is a 50 inch, 12 gauge universal brake with segmented top and bottom bending surfaces. The HS-3S-3SH brake allows bending in inverse

Port Orange, FL
View Listing

HM MACHINERY HM MRM 1550-130 60 in. x 3 ga. Power Roll

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery MRM 1550-130 Power Roll is a heavy duty motorized bending roll, with 3 rolls mounted on solid steel gable-ends, for heavy gauge, large scale fabrication.

Roll length: 60"

Port Orange, FL
View Listing

HM MACHINERY HM CS125 1452 4 ft x 14 ga. Air Shear

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery CS125 1452 Air Shear (14 ga x 52 in.) is an extremely accurate pneumatically operated machine, ideal for cutting both metal and plastics. *Its ergonomic

Port Orange, FL
View Listing

HM MACHINERY HM TTE 1848 48 in. x 18 ga. Power Slip Roll

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery TTE 1848 Power Slip Roll (18ga x 48 in.) has asymmetric rolls and adjustable roller speed, making pre-bending easy and accurate. *The rolls are crowned

Roll length: 50"

Port Orange, FL
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: