buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Rolling Mills & Ring Formers > 2 - Hi Rolling Mills

2 High Rolling Mills For Sale

43 new & used 2 high rolling mill items for sale
1
Refine: Viewing 1 - 43 of 43 matches
Sort by:
Items Per Page:  20 |  50 |  100
23" (585mm) x 31" (800mm) SCHMITZ, 2-HI SKIN PASS REV, 350 HP, PAYOFF (13680)
MACHINE# 13680 SPECIFICATIONS: MANUFACTURER: SCHMITZ CONFIGURATION: 2-HI TYPE: SKIN PASS REVERSING COIL WIDTH: 31" (800mm) THICKNESS RANGE: .007" (.2mm) - 0.090" (2.3mm) ROLL DIAMETER & LENGTH: 23.6" (600mm) D x 35.5" (9
6 1/2"(165mm) x 8" (203mm) FENN POWERED SCREWDOWNS 5 HP (13684)
MACHINE 13684 Fenn 2 HI Rolling Mill Line Consisting of: Durant Double-End Uncoiler: Model DDSC-1, SN:11122 10" wide stock width max 6" to 24" Coil I.D. Range Manual expansion 600 LB. Coil Weight Mechanical drag brake Ke
FAWCUS, 75 HP AC, 2 HIGH ROLLING MILL HAND LEVER SCREWDOWNS, (13648)
MACHINE # 13648 Roll Size: 18" (457mm) Dia.x 20" (508mm) Face Screwdowns: Individual Hand Lever Drive Motor: 75 HP, General Electric AC, 550 Volts, 3 Ph, 73 Amps, 710 Rp
12" (305mm) x 12" (305mm) RUESCH 2 HI, 150 HP, (13647)
MACHINE # 13647 Manufacturer: Ruesch Machinery Company Type Mill: 2 High Rolling Mill Roll Size: 12" (305mm) Diameter x 12" (305mm) Width Screwdowns: Po
14" (355mm) x 16" (406mm), RWF, HYD SCREWDOWN, NON REV, (11904)
MACHINE # 11904 MANUFACTURER: RWF (GERMANY) UPGRADED BY: I2S ROLL SIZE: 14" (350mm) DIAMETER X 16" (400mm) WIDTH MILL STAND CROSS SECTION: 8" (203.2mm) X 13.5"
34" x 54" Bliss 2-Hi temper mill, roller bearings, updated reels
34" x 54" Bliss 2-Hi temper mill, 250 hp, drive, newer uncoiler and recoiler, roller bearings,
32" (812mm) x 60" (1524mm), BLAW-KNOX, 2-HI HOT ROLLING, ALUMINUM (13604)
MACHINE# 13604 SPECIFICATIONS: CHARACTERISTICS: Thickness [mm]: 6,5 mm (0.25") Min. - 9,0 mm (0.35") Max. Thickness by edge [mm]: 6,5 mm (0.25") Min. - 7,0 mm (0.275") Max. Al-band thickness o
12 1/2" (317mm) x 16" (406mm), WATERBURY FARREL, 2-HI, EDGE CONDITIONING (13546)
MACHINE #13546 Manufacturer: Waterbury Farrel Company Roll Size: 12 1/2" (317mm) x 16" (406mm) Waterbury 13 Inch, Two High Reducing Gauge / Thickness Correcting Shape Correcting & Edge Co
12" (305mm) x 26" (660mm), MEMCO, EMBOSSING MILL (13515)
MACHINE 13515 MANUFACTURER ......... MEMCO TONNAGE .............. 30 TON 35 TON (APPLIED LOAD) ROLL FACE ............ 26" ROLL DIAMETER ........ 12" APPLICATION .......... PATTERN EMBOSSING ALUMINUM MAX WIDTH ...........
12" (305mm) x 26" (660mm), MEMCO, EMBOSSING MILL (13514)
MACHINE 13514 MODEL ................ 30 MANUFACTURER ......... MEMCO TONNAGE .............. 30 TON, 35 TON (APPLIED LOAD) ROLL FACE ............ 26" ROLL DIAMETER ........ 12" APPLICATION .......... PATTERN EMBOSSING ALU
8" (204mm) x 10" (254mm), RUESCH, 2 HIGH ROLLING MILL 25 HP (13516)
MACHINE 13516 MANUFACTURER: H J RUESCH COMPANY, U.S.A. TYPE MILL: 2 HIGH REVERSING ROLLING MILL ROLL BEARINGS: ROLLER WITH FORCED GREASE LUBRICATION ROLL SIZE:
20"(500mm) x 34" (860mm), WATERBURY FARREL, 75/195 MPM (13510),
MACHINE 13510 2-Hi Temper Rolling Mill Waterbury Farrel Manuafcturer: Waterbury Farrel Type: 2HI, temper rolling mill - WWD Rolling mill line feedstock: Cu and brass band Ro
16" (400mm) x 39" (1000mm), KRUPP, 130kw, (13511)
MACHINE 13511 KRUPP rolling mill Roll width about 1,0 Meter (40"), Roll diameter about 0,4 Meter (16") Dimensions 1,95 wide, 2,40 deep, 2,95 high, weight about 13to Gearbox, made by Westdeutsche Getriebewerke N=270, n/n1
16" (400mm) x 24" (600mm) GRISET 2-HI COLD BREAKDOWN MILL, 220 HP (13402)
MACHINE# 13402 Specifications: Manufacturer: Griset S.A.S. (France) Type: 2-HI Cold Breakdown Mill Maximum Strip Width: 500mm (20") Maximum Entry Thickness: 18mm (0.70") - Copper/Brass Roll Size: - Diameter: 400mm (15.75
5" (127mm) x 7/8" (22.2mm) MGZ EQUIPPED WITH SHELL ROLL WIRE FLATTENING (13459)
MACHINE 13459 MANUFACTURER: MGZ, ITALY TYPE MILL: 2 HIGH (WIRE FLATTENING MILL) SCREWDOWN: HANDWHEEL ROLL SIZE: 5" (127mm) DIAMETER X 7/8" (22.2mm) WID
4" (101mm) x 6" (152mm), IRM, 2 HIGH REVERSING ROLLING MILL (13437)
MACHINE 13437 IRM 2 HIGH 4" X 6" MODEL. . . . . . . . . . . . 2 HIGH SERIAL. . . . . . . . . . . .RI 02860 NEW . . . . . . . . . . . . .10-11-00 SCREWDOWNS...................DUAL HAND WHEEL UNCOILER ON FEED-IN SIDE . . 6
3" (80mm) x 2" (50mm) MARIO DI MAIO MODEL LSP 80X50 ROLLING MILL (13460)
MACHINE 13460 MANUFACTURER: MARIO DI MAIO ITALY TYPE MILL: 2 HIGH ROLLING MILL MODEL: LSP 80X50 ROLL SIZE: 3.149" (80mm) DIAMETER X 2" (50mm) WIDE MILL
8" (204mm) x 8" (204mm) FENN, 20 HP DC, 500 VOLTS (13364)
MACHINE 13364 MANUFACTURER: FENN MANUFACTURING CO TYPE MILL: 2 HIGH MODEL: 081 ROLL SIZE: 8" (204mm) X 8 (204mm) WINDOW OPENING:
22" (558mm) x 33" (838mm), 2-HI TEMPER PASS MILL (13353)
MACHINE# 13353 1. TECHNICAL SPECIFICATIONS: NEW PLC SYSTEM NEW THYRISTOR POWER CONTROL UNIT FOR PAY OFF REEL DC MOTOR NEW THYRISTOR POWER CONTROL UNIT FOR MILL DC MOTOR MATERIAL: MILD STEEL STRIP UP TO 1/4 HARD (ROCKWELL
12" (305mm) x 12" (305mm) CANADIAN IRON, HAND WHEEL ADJUSMENT, 50 HP AC (13225)
MACHINE # 13225 MANUFACTURER: CIF CANADIAN IRON FOUNDRIES, CANADA TYPE MILL: 2-HI COLD ROLLING MILL ROLL SIZE: 12" (304.8mm) DIA. x 12" (304.8mm) FACE WIDTH DRIVE MOTOR:
10" (254mm) x 10" (254mm), FENN, MODEL 101, 2-HI ROLLING MILL (13356)
MACHINE 13356 10" X 10" FENN MODEL 101 2-HIGH ROLLING MILL Manufacturer:.................. FENN MANUFACTURING Machine Details: SERIAL ........................ 28 MODEL ......................... 101 WORK ROLL ............
10" (254mm) x 12" (305mm) WATERBURY FARREL, 30 HP DRIVE (13189)
MACHINE 13189 MANUFACTURER: WATERBURY FARREL COMPANY ROLL SIZE: 10" (254mm) DIAMETER X 12" (304.8mm) WIDE SCREW DOWNS: INDIVIDUAL HAND LEVER SPINDLES AND COUPLINGS: C
22" (558mm) x 40" (1016mm), LEWIS, 2 HI NON REVERSING, 200 HP, 600 FPM (13185)
MACHINE 13185 22" x 40" Non-Reversing Cold Mill Type Mill: 2 High Non Reversing Rolling Mill Coil Weight: 30,000 lbs. Mill Speed: 309 to 618 FPM Post Size: 13"
25"(635mm) x 42"(1066mm) WATERBURY FARREL NON-REV, STAINLESS 37"(939mm)W (1
MACHINE # 13129 MANUFACTURER: WATERBURY FARREL SPECIFICATIONS MILL SECTION: 2 HI MILL TYPE: NON REVERSING MATERIAL: STAINLESS STEEL, CARBON STEEL STRIP WIDTH DATA MAXIMUM: 37IN/939.802MM MINIMUM: 14IN/355.601MM ENTRY GA
18" (457mm) x 65" (1650mm), WEAN UNITED, 2-HI REV, 50 HP, 230 VAC (13104)
MACHINE# 13104 Specifications: Manufacturer: Wean United (U.S.A.) Type: 2-HI Reversing Mill Roll Face: 65" (1650mm) Distance Between Housings: 67" (1700mm) Roll Diameter: 18" (457mm) Shaft Diameter: 8" (203mm) (est.) Pas
Fenn 121 2-Hi Rolling Mill - 12.5" Diameter x 14" Wide
Fenn 121 2-Hi Rolling Mill - 12.5" Diameter x 14" Wide Specifications: Work Roll Face: 9 7/8” Roll DIA: 12 ½” Roll Journal: 9” (2) Extra Sets of Rolls Max Separating Force at 100 FPM: 840,000 Ea
3" (76mm) x 5" (127mm) CAVALLIN, 2-HI ROLLING MILL, 220V AC (12976)
MACHINE# 12976 SPECIFICATIONS: Manufacturer: Cavallin Type: 2-Hi Rolling Mill Roll Size: 3 1/4" (82.5mm) dia. x 5" (127mm) wide Max. Distance Betw
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014)
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014) Mill Type 2 Hi - Single Direction (Right to Left) Roll Diameter
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL W/HYDRAULIC SCREWDOWNS, NEW 2002
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL WITH HYDRAULIC SCREWDOWNS, NEW 2002 MANUFACTURER - INTEGRATED INDUSTRIAL SYSTEMS (I2S) YEAR - 2002 SPEED - 550 FPM ROLL FACE - 19" ROLL DIAMETER -
62" (1600mm) Schloemann Skin Pass Mill
Mill data: Strip width: 500mm - 1600mm Strip thickness: 0,6mm - 6,0mm Coil diameter: 610mm - 2160mm Max. Coil weight: 26t Gear ratio of winder drives: i1 = 8: 1; i2 = 16: 1 Gear ratio of mill drives: i
1320mm KRUPP SKIM PASS MILL
Skin Pass Mill 1320 Mill data: Strip width: 500mm - 1320mm Strip thickness: 0.2mm - 4.0mm Coil dimensions: 610mm - 2160mm Max. coil weight: 26t Gear ratio of winder drives: i1 = 3,99 ; i2 = 2,05 Max. ro
6" (152mm) x 6" (152mm) STANAT, HEATED ROLLS, 20 HP DC, HYD SCREWDOWN (12914)
MACHINE 12914 MANUFACTURER: STANAT PRECISION MACHINE DIV OF BRANER MODEL: 6" x 6" SERIAL NUMBER: 476-482 TYPE: 2 HIGH ROLLING MILL SCREWDOWN:
5" (127mm) x 8" (203mm), FENN 2/4-HI REVERSING MILL w/RECOILERS, 20 HP (12797)
MACHINE # 12797 SPECIFICATIONS -MANUFACTURER: FENN MANUFACTURING -TYPE MILL: 2/4 HIGH ROLLING MILL MILL SET UP AS 2 HI -ROLL SIZE: 5" (127mm) DIA X 8" (203.2mm) WIDE -MILL
5 1/2" (140mm) x 6" (152mm) MARSHALL RICHARDS, 10 HP DC, WINDERS (11983)
MACHINE # 11983 MANUFACTURER: Marshall Richards SERIAL NUMBER: 661846 SPECIFICATIONS: Roll diameter: 5-1/4" (135mm) Roll Width: 6" (150mm) Rolling Speed: 0 to
3" (76mm) x 5" (127mm) STANAT MODEL FX-100 2-HI ROLLING MILL (12702)
MACHINE # 12702 MANUFACTURER: STANAT MACHINE CO MODEL: FX-100 ROLL SIZE: 3" (76.2mm) DIA. x 5" (127mm) FACE APPLICATION: IDEAL FOR LABORATORIES AND PRECIOUS ME
RWF SKIN PASS MILL
Year of Commissioning: 1960 Width: 250-840mm Gauge Range: 0.25 - 4mm Max Coil Weight: 12ton Entry Coiler ID: 500mm Max Entry Coil OD: 1700mm Exit Coiler ID: 500mm Max Exit Coil OD: 1700mm Maximum Line S
26" (660mm) x 53" (1346mm), SACK, SKIN PASS 2-HI ROLLING MILL (12455)
MACHINE #12455 Width Max. 1350 mm Min. 650 mm Max. Reduction : 2mm to 3mm - 2% : 0.45mm to 2mm - 3% Coil Diameter Inner 610 mm Outer 1200 mm Coil Weight Max. 12 MT Min. 8 MT RA Value 1.5 to 2.0 Micron Mill Stand Data- Si
86" x 42" UNITED/I2S TEMPER PASS ROLLING MILL
SPECIFICATIONS: COIL WEIGHT CAPACITY: 40ton GAUGE RANGE: .048 to .500 thick WIDTH: 72" ENTRY COIL ID: 24" to 36" EXIT COIL ID: 24" x 30" COIL OD: 80" SPEED: Max 1200 FPM
18" 2-HI United One-Way Temper Mill
Entry Gauge - .022"-.250" Exit Gauge - .022"- .250" Coil Width - .375"-15.43" Coil Weight - 8500# Entry Coil ID - 16"-24" Entry Coil OD - 68" Exit Coil ID - 16" (20
18" x 28" 2-HI BLISS TEMPER MILL
Recently rebuilt, all new hydraulics and controls Max Strip Thickness - .250" Min Strip Thickness - .015" Max Strip Width - 24" (28" between the housings) Speed - 350 Ft/Min HP - Main mill 15
10" x 15-3/4" SCHMITZ MODEL #EA7-250/400 2-HI ROLLING MILL
Roll size ............... 10" Diameter x 15-3/4" Face Water Cooled Manual Screwdown-Individual Dual Control Handwheels Strip width ............. 13-3/4" (350MM) - as taken from Mfg. tag EQUIPPED WIDT
16" (406mm) x 18" (457mm), STANDARD, 75/100HP, MOTORIZED SCREWDOWN (10675)
MACHINE #10675 SPECIFICATIONS: MANUFACTURER: STANDARD MACHINERY CO. TYPE: 2-HI COLD REVERSING MILL ROLL DIAMETER: 16" (406mm) ROLL WIDTH: 18" (457.2mm)
12"(305mm) x 14"(350mm) CARL WEZEL, PRECISION, AGC, HYD. SCRWDN, VOLLMER (4228)
MACHINE #4228 MANUFACTURER: CARL WEZEL K.G. (KRUPP) MODEL: BW 300/350 ROLL SIZE: 12" DIA. x 14" FACE (300mm Dia. x 350mm Face) SERIAL NUMBER: 740523 YE
Categories:
  • X machine tools (43)
  • X Rolling Mills & Ring Formers (43)
  • X 2 - Hi Rolling Mills (43)
Condition:
Price:
  •  to 
1