buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 100 of 21203 matches
Sort by:
Items Per Page:  20 |  50 |  100
2013 JLG 600S 60' Telescopic Boom Lift(Non-Run) RTR#3023173-01-02
$0
2013 JLG 600S 60' Telescopic Boom Lift(Non-Run) RTR#3023173-01-02
Unit located in Raleigh, NC (2) Units 2013 JLG 600S 60' Telescopic Boom (Non-Running), 1,000lb Capacity, Diesel Engine, 4WD, Hour Meter Reads: 4,659 (Unverified), S/N: 0300169854-- RTR#3023173-01 $14,000 2013
NBT30 ER32 Collet Chuck without Keyway Tool Holder Cone with Pull Stud
$0
NBT30 ER32 Collet Chuck without Keyway Tool Holder Cone with Pull Stud
NBT30 ER32 Collet Chuck without Keyway Tool Holder Cone with Pull Stud and Collet Nut NBT30-ER32-60L Toolholder for BT30 Automatic Tool Changer Spindle This BT Spindle Tooling is BT30 tool holder. Called NBT30 is to
160x115x17mm Vacuum Suction Pad Pod Covers Top Vacuum Plate for CNC Router
$0
160x115x17mm Vacuum Suction Pad Pod Covers Top Vacuum Plate for CNC Router
160x115x17mm Vacuum Suction Pad Pod Covers Top Vacuum Plate for CNC Router Model: 160x115x17mm Same as OEM P/N:4-011-11-0192 These rubber replacement suction plates are working with pod and rail cnc vacuum pods
100mm Schmalz Vacuum Blocks Cups clamping Pods for Weeke Homag CNC router
$0
100mm Schmalz Vacuum Blocks Cups clamping Pods for Weeke Homag CNC router
100mm Tall Schmalz Vacuum Pods for Weeke Homag CNC These vacuum pods are 100mm tall, 100mm pods with consoles two circuit vacuum system, as CNC pods for a Weeke Homag CNC, also widely used with Masterwood, Busellato,
Biesse CNC vacuum pods cups black ball valves and white Locating Ring
$0
Biesse CNC vacuum pods cups black ball valves and white Locating Ring
This spare part is the replacement valve & insert and white nylon locating ring on bottom for Biesse vacuum pods. Biesse suction cups are mainly made of 4 parts, including base body, bottom white locating ring, bl
CNC rubber sealing gasket pads for SCM CNC router Vacuum Suction pods
$0
CNC rubber sealing gasket pads for SCM CNC router Vacuum Suction pods
These rubber vacuum pods seals and gaskets are for the CNC woodworking centers from SCM/Morbidelli and Greda Sirio 3A AT - woodworking CNC machining centres. Its size 143x143x11mm, suitable for 145 x 145mm SCM vacuum cup
Edgebander Rubber Pressure Roller Wheels for Edge Banding Machine
$0
Edgebander Rubber Pressure Roller Wheels for Edge Banding Machine
Rubber Pressure Roller Wheels with Bearing for Edgebanders Edge Banding Machine This rubber roller is one of the Edge banding machine accessories. It is edge conveyor roller, also called pressure roller. The edge ban
Edge Bander Conveyor Chain Track Pads for BIESSE SCM IMA HOMAG Edgebanding
$0
Edge Bander Conveyor Chain Track Pads for BIESSE SCM IMA HOMAG Edgebanding
Conveyor Chain Track Pads for BIESSE SCM IMA HOMAG Edgebanding Edge Bander Edgebander Machine These rubber tracking pads for conveyor chain, widely use on edgebanders, such as BIESSE, SCM, IMA, Homag, Brandt, KDT and
CNC router rubber Pads Cover suction plate for Schmalz Vacuum Cups pods
$0
CNC router rubber Pads Cover suction plate for Schmalz Vacuum Cups pods
CNC router Vacuum rubber Pads Cover suction plate for CNC Vacuum Cups pods CNC Vacuum Pad Cover Vacuum Cups and Pods Rubber Replacement Plates for CNC Routers This rubber vacuum suction cup is the replacement pla
SCM Morbidelli CNC Vacuum Pods suction cups for Point to Point CNC Router
$0
SCM Morbidelli CNC Vacuum Pods suction cups for Point to Point CNC Router
SCM Morbidelli CNC Vacuum Pods suction cups for Point to Point CNC Router These CNC vacuum pods and cups are for SCM / Morbidelli CNC routers and Greda Sirio 3A AT - woodworking NC-machining centres, replacement vacu
BIESSE CNC Vacuum Suction Pods cups for Biesse Rover CNC Routers rail cnc
$0
BIESSE CNC Vacuum Suction Pods cups for Biesse Rover CNC Routers rail cnc
CNC Vacuum Suction replacement Pods for Biesse Rover CNC Routers These vacuum pods and cups are for Biesse CNC routers, replacement pod for using with Biesse Rover, Biesse Point to Point machines. With these cnc vacu
Long Foam Cutting Tools EPS Foam Milling Router Bits Ball noseand Flat End
$0
Long Foam Cutting Tools EPS Foam Milling Router Bits Ball noseand Flat End
Long Foam Cutting Tools EPS Foam Milling Router Bits Ball End and Flat End Model: Ball End and Flat End Long flute foam cutting router bits These long series foam end mill and ball nose router bits are widely used wi
cnc machine CAT50 Tool Changer Grippers CAT50 Tool Holders ATC Tool Forks
$0
cnc machine CAT50 Tool Changer Grippers CAT50 Tool Holders ATC Tool Forks
CAT50 Tool Holder Gripper Plastic Tool Finger Cradle Clips CAT tools were developed by an American company. CAT 50 tool holder is a cat holder widely used in metalworking. And CAT50 tool gripper is the clamping system
CNC Accessories CAT40 tool grippers Plastic tool holder fingers tool fork
$0
CNC Accessories CAT40 tool grippers Plastic tool holder fingers tool fork
CNC Accessories CAT40 tool grippers Plastic tool holder fingers tool fork CAT40 Plastic Tool Holder Clips for Automatic Tool Changer CNC Replacement These plastic replacement tool holder clips are CAT40 tool forks fo
HSK 63F tool holder fork toolholder clip for HOMAG WEEKE VANTAGE CNC Router
$0
HSK 63F tool holder fork toolholder clip for HOMAG WEEKE VANTAGE CNC Router
HSK 63F tool holder fork toolholder clip for HOMAG WEEKE VANTAGE CNC Router HSK63F CNC Gripper Forks for HOMAG WEEKE CNC Router Machining Centre VANTAGE HSK 63F tool forks for WEEKE VANTAGE CNC Router This plastic
Laguna black automatic tool changer bt30 tool holder clips tool gripper
$0
Laguna black automatic tool changer bt30 tool holder clips tool gripper
Laguna black automatic tool changer bt30 tool holder clips tool gripper BT30 CNC Tool Finger Plastic Holding Tools Magazine Holder BT30 Plastic Holding Tool Replacing Finger This plastic holding tool is the BT30
ISO30 CNC tools ATC Tool Holder Forks ISO30 tool fork Plastic Tool Fingers
$0
ISO30 CNC tools ATC Tool Holder Forks ISO30 tool fork Plastic Tool Fingers
ISO30 ATC Tool Holder Forks HSD Tool Fork Plastic Tool Holder Finger ISO30 tool holder finger also called ISO30 tool cradle, ISO30 Tool Holder Fork, ISO30 tool grippers or ISO30 tool clips. These replacement tool hol
Biesse HSK 63F Tool Holder Forks CNC Tool clips grippers
$0
Biesse HSK 63F Tool Holder Forks CNC Tool clips grippers
HSK63F cnc tool finger forks for HSK 63F tool holder clamping HSK toolholder gripper also called HSK toolholder fork, HSK tool clips, HSK cradle, HSK plastic tool holder, HSK tool holder finger, HSK tool forks etc. HSK
3 in 1 Wood Lathe Tools Woodturning Lathe Knives for Wood Lathing
$0
3 in 1 Wood Lathe Tools Woodturning Lathe Knives for Wood Lathing
3 in 1 cnc woodturning lathe knives for wood lathing This wood lathe knife tool is a newest design knife for CNC wood turning lathe machine. We called it 3 in 1 wood lathe knife. It includes chisel tool steel knife bo
New Design Wood Turning cutting Tools for Woodturning CNC and Copy Lathes
$0
New Design Wood Turning cutting Tools for Woodturning CNC and Copy Lathes
New Design Turning Tools for Woodturning CNC and Copy Lathes After more than a year of painstaking R & D and continuous improvement, combined with the actual use feedback from users, a new generation of woodworkin
Carbide Wood Lathe Knife CNC Lathe Cutters for Woodturning Lathe Machine
$0
Carbide Wood Lathe Knife CNC Lathe Cutters for Woodturning Lathe Machine
Carbide CNC Wood Lathe Knifes for Woodturning CNC Lather Machine This CNC wood lathe knife is a new design carbide wood lathe cutter, it is used with CNC wood turning lathe machine, reduces the tool changing times great
Complete Liquidation: AR Commercial Roofing & Contractors
$0
Complete Liquidation: AR Commercial Roofing & Contractors
2-Day Live & Online Auction – 3% Broker’s Participation Fabrication & Metalworking Equipment Rolling Stock ● Building Materials ● Office Assets ● Real Estate http://bidindustrialauctions.com/ Owner Reti
ONLINE ONLY AUCTION
$0
ONLINE ONLY AUCTION
Formerly Tucker Electronics 11448 Pagemill Road, Dallas, TX 75243 Bid Now! Bidding Closes Tuesday, June 12 at 3 PM http://www.united-scs.com/portfolio/online-only-auction/ Inspections: Monday, June 11 • 9 AM –
Magnetic Chucks
$0
Magnetic Chucks
Magnetic Chucks SPECIFICATIONS & EQUIPMENT: We have an assortment of magnetic chucks from 6”x12” to 20”x60” Both permanent and electromatic CONDITION: Good PRICE: F.O.B. Rochester, "as
Rotary Tables
$0
Rotary Tables
Rotary Tables SPECIFICATIONS & EQUIPMENT: We have an assortment of rotary tables from 10” to 22” diameter, manual and powered CONDITION: Good PRICE: F.O.B. Rochester, "as-inspected"
Starret Crystal Pink Granite Surface Plate
$0
Starret Crystal Pink Granite Surface Plate
Starret Crystal Pink Granite Surface Plate
0.25 Cubic Foot C&M Topline #TL25 Vibratory Bowl
$0
0.25 Cubic Foot C&M Topline #TL25 Vibratory Bowl
2" Dump Chute Capacity (with exp plug/bowl drain),1/4 HP, 40Lbs.,19.5"High
Cincinnati Model 135, 10GA x 6' Hydraulic Shear W/ Micro Computer Gauge Control
$0
Cincinnati Model 135, 10GA x 6' Hydraulic Shear W/ Micro Computer Gauge Control
Capacity (Mild Steel) 10 Ga. Cutting length 74-3/4" Maximum rake In/ft 1/4" Hold down force 3.5tons Number of hold downs 8 Distance under hold downs 1/2" Distance under guard 1/4" Speed: maximum (1/2
Carlton 4'9" Radial Arm Drill
$0
Carlton 4'9" Radial Arm Drill
Area of Base: 30" x 53" Spindle Speeds: (9) 100 - 2000 RPM Feeds: (6) .004 - .025 IPR Spindle Travel: 12" Diameter of Spindle: 2-1/2" Taper in Spindle: #4MT Distance Spindle to Base: 24" Min., 53" Max.
Kearney & Trecker Milwaukee Horizontal Milling Machine
$0
Kearney & Trecker Milwaukee Horizontal Milling Machine
15" x 63" Table 7.5 Hp motor
Landis 1R, 10" x 20" O.D. / I.D. Cylindrical Grinder
$0
Landis 1R, 10" x 20" O.D. / I.D. Cylindrical Grinder
10" Swing over bed 20" distance between centers 2 to 240 IPM speeds of work head 12" Grinding diameter 1-1/2" Grinding wheel width Equipped with: Swivel table Swivel work head with 90 degrees each wa
Lake Erie 500 Ton Hydraulic Press
$0
Lake Erie 500 Ton Hydraulic Press
Principal Specifications: PRESSING FORCE-MAIN SLIDE 500 Ton full tonnage pressing 100 Ton low tonnage pressing 55" Ton return capacity @ 3500 P.S.I. 17" Diameter main ram diameter (single acting) 6-
Blanchard #11D-16, 16" Vertical Spindle Rotary Surface Grinder
$0
Blanchard #11D-16, 16" Vertical Spindle Rotary Surface Grinder
Specifications: Spindle Motor: 15HP, 240/480 volt, Range: 20" Diameter x 9" Vertical over Chuck Chuck: 16" Diameter Chuck Speeds: 15, 24, 41, 64 RPM Grinding Wheel: TBD Grinding Wheel Speed: 1200 RPM
Blanchard #11-16, 16" Vertical Spindle Rotary Surface Grinder
$0
Blanchard #11-16, 16" Vertical Spindle Rotary Surface Grinder
Specifications: Spindle Motor: 15HP, 240/480 volt, wired for 480 operation Range: 20" Diameter x 9" Vertical over Chuck Chuck: 16" Diameter Chuck Speeds: 15, 24, 41, 64 RPM Grinding Wheel: None, Customer t
Springfield 62AR/2CS Universal Vertical Spindle Grinder
$0
Springfield 62AR/2CS Universal Vertical Spindle Grinder
62" T-Slotted Face Plate Type Table 70" Maximum Swing 30" Stroke Of Grinding Heads 12" To 60" Clearance Over Face Plate 48" Vertical Rail Travel Dual Grinding Heads Hydraulic Unit Dual Pendants
Minster # 50E-5-48, 93 Ton SSDC Press
$0
Minster # 50E-5-48, 93 Ton SSDC Press
Model 50E-48 93 Tons pressure at Bottom of the stroke 4" Stroke 60-120 Spm 8" Ram Adjustment 14" Shut Height 48" x 31" Bed 16" Windows Air Clutch and Brake Air Counterbalances Floor Standing
Blanchard #11-20, 20" Vertical Spindle Rotary Surface Grinder
$0
Blanchard #11-20, 20" Vertical Spindle Rotary Surface Grinder
Specifications: Spindle Motor: 15HP, 240/480 volt, Range: 20" Diameter x 9" Vertical over Chuck Chuck: 20" Diameter Chuck Speeds: 15, 24, 41, 64 RPM Grinding Wheel: TBD Grinding Wheel Speed: 1200 RPM
3-1/2" Summit Horizontal Table Type Boring Mill
$0
3-1/2" Summit Horizontal Table Type Boring Mill
3.35" Spindle Diameter #5 MT Taper Spindle 51" x 43" Rotary Table Size 45" Vertical Travel 58" Cross Travel 28" Spindle Travel 12.5 - 1250 RPM Spindle Speeds 45" Bed Travel 4.92 Tons Max Table Loa
Springfield #3-1/2 ATR Universal Vertical Spindle Rotary Grinder
$0
Springfield #3-1/2 ATR Universal Vertical Spindle Rotary Grinder
Preliminary specifications to be verified upon arrival 62" T-Slotted Face Plate Type Table 70" Maximum Swing 27-1/2" Stroke Of Grinding Heads 12" To 36" Clearance Over Face Plate 36" Vertical Rail Tr
Mattison 120" Geared Head Vertical Spindle Rotary Surface Grinder
$0
Mattison 120" Geared Head Vertical Spindle Rotary Surface Grinder
144" Swing Inside Water Guards 120" Diameter Magnetic Chuck 66" Diameter Cortland Style Wheel Chuck 48" Height Under New Set Of Segments 300 H.P. Geared Head Main Spindle Equipped With: Quick Tilt Head
Wagner WAS 90R/S Automatic Circular Carbide Saw
$0
Wagner WAS 90R/S Automatic Circular Carbide Saw
Cutting Range: 5/8"(15.8mm) - 2-3/4"(67mm) dia. Round solid stock 5/8"(15.8mm) - 2-3/8"(60mm) dia. Square stock Cut-off length (min/max): 1.5"(38mm) / 40"(1000mm) Blade: 11-1/4"(275mm) diameter x 1.26"(32
New Saylor-Beall 10 Hp VT-755-120
$0
New Saylor-Beall 10 Hp VT-755-120
10 Hp, 3 phase, 460 volt motor With Magnetic Motor Starter Model 707, 2 Stage Cast Iron pump 34.4 cfm air capacity @ 175 psi Mounted on 120 Gallon Vertical Air Receiver tank Low oil level switch Cylinde
Blanchard 42" Magnetic Chuck (only)
$0
Blanchard 42" Magnetic Chuck (only)
42" Diameter Magnetic Chuck " Chuck Life Fully tested with 30 Day return
Dake 250 Ton 4-Post Hydraulic Press
$0
Dake 250 Ton 4-Post Hydraulic Press
4 Post 18" Stroke 22" Daylight 37" LR x 29" FB Bed 37 x 29 ram T slotted 26” LR x 14.5” between the posts 9” diameter main cylinder 3.5” diameter posts 4000 PSI max pressur
Blanchard #22AK-42, 42" Fanuc CNC Vertical Spindle Rotary Surface Grinder
$0
Blanchard #22AK-42, 42" Fanuc CNC Vertical Spindle Rotary Surface Grinder
22" Grinding Wheel Diameter 42" Magnetic Chuck Diameter, Approximately 3/8" Chuck Step 44" Swing Inside Water Guards 24" Vertical Range,Standard 3000 LBS. Maximum Load on Chuck 50 HP Grinding Wheel Horsepo
Springfield VGC 25, CNC Universal Vertical Spindle Grinder
$0
Springfield VGC 25, CNC Universal Vertical Spindle Grinder
Arriving 1-5-2014
Blanchard #11-16, 16" Vertical Spindle Rotary Surface Grinder
$0
Blanchard #11-16, 16" Vertical Spindle Rotary Surface Grinder
Specifications: Spindle Motor: 15 HP, 240/480 volt, Range: 20" Diameter x 9" Vertical Chuck: 16" Diameter, Chuck Speeds: 15, 24, 41, 64 RPM Grinding Wheel:Cylindrical Full Wheel Style Grinding Wheel S
New Saylor-Beall 5 Hp VT-735-80
$0
New Saylor-Beall 5 Hp VT-735-80
5 Hp, 1 phase, 230 volt motor With Magnetic motor starter Model 705, 2 Stage Cast Iron pump 17.3 cfm air capacity @ 175 psi Auto Stop/Start control Mounted on 80 Gallon Vertical Air Receiver tank L34 x
Kent Model KGS-306-AHD Surface Grinder
$0
Kent Model KGS-306-AHD Surface Grinder
Kent Model KGS-306-AHD Surface Grinder
Giddings & Lewis Chipmaster Radial Arm Drill
$0
Giddings & Lewis Chipmaster Radial Arm Drill
Giddings & Lewis Chipmaster Radial Arm Drill
KAO Ming Radial Arm Drill
$0
KAO Ming Radial Arm Drill
KAO Ming Radial Arm Drill
Blanchard #20HK-36, Geared Head Vertical Spindle Rotary Surface Grinder
$0
Blanchard #20HK-36, Geared Head Vertical Spindle Rotary Surface Grinder
Specifications: 20" Grinding Wheel Diameter 36" Magnetic Chuck Diameter 42" Swing Inside Water Guards 24" Vertical Range 100 HP Grinding Wheel Horsepower Geared Head Design Automatic Down Feed 0 -
New Saylor-Beall 5 Hp VT-735-80, 3 phase motor
$0
New Saylor-Beall 5 Hp VT-735-80, 3 phase motor
5 Hp, 3 phase, 460 volt motor With Magnetic motor starter Model 705, 2 Stage Cast Iron pump 17.3 cfm air capacity @ 175 psi Auto Stop/Start control Mounted on 80 Gallon Vertical Air Receiver tank L34 x
Genie Telescopic Reach Fork Lift/Telehandler
$1
Genie Telescopic Reach Fork Lift/Telehandler
2018 Genie Telescopic Reach Fork Lift/Telehandler, M/N- GTH-5519, S/N- GTH55M-9630, 5,500 Lbs. Capacity, Hours: 277 (Sulphur, LA) (Rental Ready)
Genie Electric Scissor Lift
$1
Genie Electric Scissor Lift
2017 Genie 19ft Electric Scissor Lift, M/N- GS-1930, S/N- GS30P-173750, Hours: 76 (La Porte, TX) (Rental Ready)
Auction of Up to 200 Construction Rental Units
$1
Auction of Up to 200 Construction Rental Units
Utility Vehicles, Air Compressors, Light Towers, Forklifts, Welding Trailers and More... Manufacturers Include: John Deere, Kawasaki, Doosan, Terex, IR, Lincoln, Sullair & Toyota
Terex Biogrind 260
$1
Terex Biogrind 260
Horizontal wood grinder, hydraulic folding discharge conveyor, hopper, screens, magnetic pulley and remote control Excellent Condition 500 hours Cummins 8.3L 300HP
Starret Crystal Pink Granite Surface Plate
$1
Starret Crystal Pink Granite Surface Plate
Starret Crystal Pink Granite Surface Plate
Amada Turrent Punch Press PEGA 304050
$1
Amada Turrent Punch Press PEGA 304050
Amada Turret Punch Press and Amada 04P-C Controller. In excellent working condition (please watch the video). Well maintained and serviced directly by Amada since it was new. Operator says that they've never had an
  • Tonnage: 30T
    Utility knife blades. Various manufacturers and styles.
    $1
    Utility knife blades. Various manufacturers and styles.
    Utility knife blades. Various manufacturers and styles.
    Drawer slide
    $1
    Drawer slide
    Undermount drawer slides; various sizes from 10" - 15"
    Drawer Slide 16" Brown
    $1
    Drawer Slide 16" Brown
    16" Epoxy coated Drawer Slide; brown [actual price is $1.50 per set]
    Bandsaw 8"-10" Slide Guides
    $5
    Bandsaw 8"-10" Slide Guides
    Slide Guides for 8" - 10" Band Saw.
    JWS22CS-108
    $9
    JWS22CS-108
    Lock out Bracket for (708320) Jet Shaper
    Pipe 1/2"& 3/4" x 36"- 60"
    $10
    Pipe 1/2"& 3/4" x 36"- 60"
    Pipe 1/2"& 3/4" x 36"- 60" Model: Various 1/2" & 3/4" Pipe Black & Galvanized; 36" - 60" PRICED PER EACH
    Cutter Shaper Finger Pull
    $10
    Cutter Shaper Finger Pull
    Cutter Shaper Finger Pull; Finger Pull for 3/4" Stock; 2-1/4" Diameter, 3/4" bore
    Cuttr Shpr Edge Profile
    $10
    Cuttr Shpr Edge Profile
    Cutter Shaper Edge Profile; 3-1/4" Diameter; 1-1/4" Bore
    New Mining Machines for Sale at CTS Plant Services Ltd
    $10
    New Mining Machines for Sale at CTS Plant Services Ltd
    Caterpillar 972H Front Axle 251-4522 More Caterpillar Used and New Machines and Parts at CTS Ltd. Browse this machine and more at CTS Plant Services Leeds, UK http://www.ctsplantservices.com
    7-1/2" x 24T Carbide tipped saw blade by Irwin
    $10
    7-1/2" x 24T Carbide tipped saw blade by Irwin
    7-1/2" x 24T Carbide tipped saw blade by Irwin. Price per each.
    Electric Stapler/Nailer by Ace Hardware
    $15
    Electric Stapler/Nailer by Ace Hardware
    Electric Stapler/Nailer by Ace Hardware. Model 22087. 10amp, 1phase, 120V.
    Muffler R/O Sander - Jet
    $19
    Muffler R/O Sander - Jet
    Muffler R/O Sander - Jet
    Leather marking/spacing tool by Craftool Co
    $19
    Leather marking/spacing tool by Craftool Co
    Leather marking/spacing tool by Craftool Co. Model 16-7. 5-1/2" long; 5/8" wheel.
    Various Handtools
    $20
    Various Handtools
    Various Handtools Models: A - Stanley Dovetail Saw - 10" B - Disston Dovetail Saw - 10" C - Fine Kerf Dovetail Saw - 6-1/2" D - Woodriver Marking Gauge - 6"
    JWS22CS-102 Spanner Wrench
    $20
    JWS22CS-102 Spanner Wrench
    Spanner Wrench for (708320) Jet Shaper
    METRIC AND IMPERIAL COLLET EXTENSIONS
    $25
    METRIC AND IMPERIAL COLLET EXTENSIONS
    We sell a wide variety of collet extensions priced at $25. All our products are in stock and available for immediate pickup or shipping to your location countrywide. Feel free to contact us for all your tooling needs or
    Shaper Cutter by Rockwell
    $29
    Shaper Cutter by Rockwell
    Shaper Cutter by Rockwell. Drawer Lock profile. Model EC240. 2-5/8" x 3/4" with 3/4" bore.
    Dust Connection for Delta 2000 Contractor's Saw
    $34
    Dust Connection for Delta 2000 Contractor's Saw
    Dust Connection for Delta 2000 Contractor's Saw
    Hand Drill (Egg Beater)
    $35
    Hand Drill (Egg Beater)
    Hand Drill (Egg Beater) Model: Various [Goodell Pratt, Millers Falls & Paxto] Egg Beater Style; 11" - 12-1/2"
    Screw/Drill Push Driver
    $35
    Screw/Drill Push Driver
    Screw/Drill Push Driver Model: Various [Stanley; Miller Falls; Goodell Pratt] 8-1/2" - 17"
    JTAS10-122
    $37
    JTAS10-122
    JTAS10-122 Bracket Motor for Right Tilt
    Cutter Rvrs Hlx 14mm HS
    $38
    Cutter Rvrs Hlx 14mm HS
    Cutter Reverse Helix 14mm HerSaf
    Clamp Bar 24"-84" & KBody
    $39
    Clamp Bar 24"-84" & KBody
    Clamp Bar 24"-84" & KBody Model: Various [Jorgensen & Bessey] 24", 36", 84" PRICED PER EACH
    Fishing Rod Winder Clamp for guide repairs
    $39
    Fishing Rod Winder Clamp for guide repairs
    Fishing Rod Winder Clamp for guide repairs. Model 20 by Herter's.
    Various Handtools
    $45
    Various Handtools
    Models: A - LieNielsen #4 Screw Driver B - LieNielsen #7 Screw Driver C - GlenDrake Chisel Hammer - CH#2 D - ISO9001:2000 6" Digital Caliper E - Veritas Variab
    Clamp I-Beam 48" 60" Jorg
    $45
    Clamp I-Beam 48" 60" Jorg
    Clamp I-Beam 48" 60" Jorgensen Model: Various [Jorgensen] 4' and 5' length Price Per Each
    Hand Drill -Storage in Handle
    $45
    Hand Drill -Storage in Handle
    Hand Drill -Storage in Handle Model: Various [Goodell Pratt, Millers Falls & Viking] Egg Beater Style; 11-1/2 - 13"
    Planer Knives
    $45
    Planer Knives
    Power (Volts, Phase, Polarity, H.P.): 120, Single, AC Set of 3 Planer Knives by Ohio Knife Corp. Measure 18" x 1-1/8" x 3/16".
    Planer Bld for Scraper Veritas
    $49
    Planer Bld for Scraper Veritas
    Planer Blade for Scraper Veritas Model: [Veritas] 50 Degree Primary Bevel; PM-VII Steel; 2-1/4" x 4-1/4"
    12 Tons Used Pittsburgh Hydraulic H Frame Press (Local Pickup Only), Mdl. -, #P1043 *SPECI
    $50
    12 Tons Used Pittsburgh Hydraulic H Frame Press (Local Pickup Only), Mdl. -, #P1043 *SPECI
    Stroke 12 Ton None
    PRECISION VISES
    $50
    PRECISION VISES
    We sell a wide variety of vices ranging from $50 to $1500. All our products are in stock and available for immediate pickup or shipping to your location countrywide. Feel free to contact us for all your tooling needs or
    Electrician's Step Drill Bit; 3/4" to 1-3/8" by 16ths
    $50
    Electrician's Step Drill Bit; 3/4" to 1-3/8" by 16ths
    MK Morse Electrician's Step Drill Bit; 3/4" to 1-3/8" by 16ths.
    Beading Shaper Cutter
    $50
    Beading Shaper Cutter
    Beading Shaper Cutter; 3-5/8" Diameter; 1/4" R; 1" H; 3/4" Bore; Model 321812
    Clamp Bar 24"/31" KBody
    $55
    Clamp Bar 24"/31" KBody
    Clamp Bar 24"/31" KBody Model: Various 24" or 31" [Bessey/Jet]
    Motor Cover for PM2000 table saw
    $58
    Motor Cover for PM2000 table saw
    Motor Cover for PM2000 table saw
    Clamp Bar 40"/60" KBody
    $59
    Clamp Bar 40"/60" KBody
    Clamp Bar 40"/60" KBody Model: Various 40" or 60" [Bessey]
    Clamp Bar 40" KBody Bessey
    $59
    Clamp Bar 40" KBody Bessey
    Clamp Bar 40" KBody Bessey Model: KR3.540 [Bessey] 40" KBody Clamp
    30-5107
    $60
    30-5107
    30-5107 Bracket Performax
    Door Edge Finger Pull Shaper Cutter
    $60
    Door Edge Finger Pull Shaper Cutter
    Door Edge Finger Pull Shaper Cutter; 4-1/2" Diameter x 1-1/4" H x 1-1/4 - 1 Bore
    Hand Drill (Egg Beater)
    $65
    Hand Drill (Egg Beater)
    Hand Drill (Egg Beater) Model: Various [Goodell Pratt, Millers Falls & Stanley] Egg Beater Style; 12" - 14-1/2"
    Moulder knives
    $75
    Moulder knives
    Moulder knives. Assorted sizes. 25" long.
    Categories:
    Condition:
    Manufacturer:
    Location:
    Price:
    •  to 
    1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>