buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 100 of 20555 matches
Sort by:
Items Per Page:  20 |  50 |  100
Mitsubishi Model MV2400S CNC Wire EDM
$119,500
Mitsubishi Model MV2400S CNC Wire EDM
Mitsubishi Model MV2400S CNC Wire EDM Model MV-2400S, S/N 56DM2972, New 2017 Stock # Q12339 EQUIPPED WITH: Mitsubishi M800 CNC Control, AT- Auto Threader, Tank capacity 227 gallons, Linear motion guide ways, Line
  • X axis travel: 23.6"
  • Y axis travel: 15.7"
    Fanuc CR-35iA Collaborative Robot
    $24,500
    Fanuc CR-35iA Collaborative Robot
    Fanuc CR-35iA Collaborative Robot Model CR-35iA, New 2020 Stock # Q12274 EQUIPPED WITH: FANUC R-30iB Plus Controller A05B-2621-B020, iPendant with 4D graphics, No Safety Fence Required. Was setup on a Doosan Mach
    Fanuc Robodrill a-D21MiB5ADV CNC Vertical Machining Center
    $67,500
    Fanuc Robodrill a-D21MiB5ADV CNC Vertical Machining Center
    Fanuc Robodrill a-D21MiB5ADV CNC Vertical Machining Center Model Robodrill a-D21MiB5ADV, S/N P188ZU669, New 2018 Stock # Q12343 EQUIPPED WITH: Fanuc Series 31i - Model B5ADV CNC Control, 15-3/4" x 25-1/2&quo
    • X axis: 19.7"
    • Y axis: 15.7"
      Fanuc Robodrill a-D21MiB5ADV CNC Vertical Machining Center
      $67,500
      Fanuc Robodrill a-D21MiB5ADV CNC Vertical Machining Center
      Fanuc Robodrill a-D21MiB5ADV CNC Vertical Machining Center Model Robodrill a-D21MiB5ADV, S/N P188ZU669, New 2018 Stock # Q12342 EQUIPPED WITH: Fanuc Series 31i - Model B5ADV CNC Control, 15-3/4" x 25-1/2&quo
      • X axis: 19.7"
      • Y axis: 15.7"
        Doosan DNM 350/5ax Simultaneous 5-Axis CNC Vert Machining Center w/ Robot
        $189,500
        Doosan DNM 350/5ax Simultaneous 5-Axis CNC Vert Machining Center w/ Robot
        Doosan DNM 350/5ax Simultaneous 5-Axis CNC Vertical Machining Center with Fanuc CR-35iA Robot Model DNM 350/5ax, S/N MV0053-000255, New 2016 Stock # Q12251R EQUIPPED WITH: Fanuc i-Series CNC Control, 13.8″ Diamet
        • X axis: 23.622"
        • Y axis: 25.787"
          DOOSAN DNM 350/5AX SIMULTANEOUS 5-AXIS CNC VERTICAL MACHINING CENTER, 2016
          $169,500
          DOOSAN DNM 350/5AX SIMULTANEOUS 5-AXIS CNC VERTICAL MACHINING CENTER, 2016
          DOOSAN DNM 350/5AX SIMULTANEOUS 5-AXIS CNC VERTICAL MACHINING CENTER Model DNM 350/5AX, S/N MV0053-000255, New 2016 Stock # Q12251 EQUIPPED WITH: Fanuc i-Series CNC Control, 13.8″ Diameter Trunnion Table, Coolant
          • X axis: 23.622"
          • Y axis: 25.787"
            Lagun Vertical Knee Mill, Table: 10" x 50"
            $RFQ
            Lagun Vertical Knee Mill, Table: 10" x 50"
            Lagun Vertical Knee Mill S/N: SE-21898, Stock No: 18400 Model: FT-2S Table: 10" x 50" Taper Spindle: R-8 Speed: 55-2940 RPM Hi/Lo Range Step Pully Head One-Shot Lube Motor: 2 HP 208-220/440 VAC Three
            • Table width: 10"
            • Table length: 50"
              Lagun Vertical Knee Mill, Table: 10" x 50"
              $RFQ
              Lagun Vertical Knee Mill, Table: 10" x 50"
              Lagun Vertical Knee Mill S/N: SE-21898, Stock No: 18400 Model: FT-2S Table: 10" x 50" Taper Spindle: R-8 Speed: 55-2940 RPM Hi/Lo Range Step Pully Head One-Shot Lube Motor: 2 HP 208-220/440 VAC Three
              • Table width: 10"
              • Table length: 50"
                Bridgeport Series 1 Knee Mill, Table: 9" x 42"
                $RFQ
                Bridgeport Series 1 Knee Mill, Table: 9" x 42"
                Bridgeport Knee Mill S/N: 113617, Stock No: 18399 Model: Series 1 Table: 9" x 42" Taper Spindle: R-8 Variable Speed J Head One-Shot Lube Motor: 2 HP 230 VAC Three Phase Overall Dimensions, Approximat
                • Table width: 9"
                • Table length: 42"
                  Cincinnati Cylindrical Universal Grinder, Model 10x24
                  $RFQ
                  Cincinnati Cylindrical Universal Grinder, Model 10x24
                  Cincinnati Cylindrical Universal Grinder S/N: 4U2B1W-23, Stock No: 18398 Model: 10x24 Capacity: 10" x 24" Hyd. Table Travel: 3-240 IPM Auto Infeed of Wheel Head: 0.0002" to 0.004" Work Head Cent
                  • Swing: 10"
                  • Centers: 24"
                    Blanchard 36" Vertical Spindle Rotary Surface Grinder
                    $RFQ
                    Blanchard 36" Vertical Spindle Rotary Surface Grinder
                    Blanchard 36" Vertical Spindle Rotary Surface Grinder S/N: 4604, Stock No: 18397 Model: No. 18 Hours: 7865 Magnetic Chuck Diameter: 36" Max Clearance Chuck to Wheel: 12" W/Cylinder. Wheel, 11" W/
                    • Chuck: 36"
                      2020 Linde E18S Stand-Up Forklift RTR# 6062772-01
                      $8,000
                      2020 Linde E18S Stand-Up Forklift RTR# 6062772-01
                      Equipment located in Salem, OR. 2020 Linde E18S Stand-Up Forklift, 3,500lb Lift Capacity, Electric Power System, Hyd Transmission, 2WD, Side Shift, Rop, Hour Meter Reads: 1,874 (Unverified), S/N: A11346X00046 All equi
                      2024 Wacker Neuson RD12A-90 Vibratory Roller RTR# 6053171-01
                      $16,500
                      2024 Wacker Neuson RD12A-90 Vibratory Roller RTR# 6053171-01
                      Unit located in Raleigh, NC. 2024 Wacker Neuson RD12A-90 Vibratory Roller, Honda GX630 Gas Engine, Hyd Transmission, Hour Meter Reads: 447.7 (Unverified), S/N: WNCRD12AJPUM06012 All equipment is sold “As Is, Where Is”.
                      2025 Bobcat S650 High-Flow Skid Steer w/Trailer RTR# 6053480-01
                      $75,000
                      2025 Bobcat S650 High-Flow Skid Steer w/Trailer RTR# 6053480-01
                      Unit located in Oklahoma City, OK. 2025 Bobcat S650 High-Flow Skid Steer w/ 80" HD Bucket, 80" HD Tooth Bucket, 4K Pallet Forks, 72" Root Grapple, 20Ph Auger w/ 12" Bit, 78" Landplane, Tier 4 Di
                      Sander Disc 12" B/T Delta
                      $299
                      Sander Disc 12" B/T Delta
                      Sander Disc 12" B/T Delta Model: 31-120 [Delta] S/N: 011234Q1042 12" Bench Top Disc Sander 1./2Hp; 1Ph; 120Volt
                      Planer 12-1/2" BT Dewalt
                      $549
                      Planer 12-1/2" BT Dewalt
                      Planer 12-1/2" BT Dewalt Model: DW735 [DeWalt] S/N: 201301-CT019578 13" Bench Top Planer 15Amp; 1Ph 120Volt
                      Jointer 6" 14Amp Mbl Bs Delta
                      $699
                      Jointer 6" 14Amp Mbl Bs Delta
                      Jointer 6" 14Amp Mbl Bs Delta Model: 37-196 [Delta] S/N: W2034 6" Jointer w/Mobile Base 14.4Amp; 1Ph; 115/230Volt
                      Dust Collector 1.5hp w/canstr
                      $699
                      Dust Collector 1.5hp w/canstr
                      Dust Collector 1.5hp w/canstr Model: 708626C DC1100C [Jet] S/N; 03053536 Dust Collector w/Canister 1-1/2Hp; 1Ph; 115/230Volt
                      • Motor: 1.5HP
                        Mortiser Bench Top Dlx -PM
                        $699
                        Mortiser Bench Top Dlx -PM
                        Mortiser Bench Top Dlx -PM Model: 1791310 701 [Powermatic] S/N: 7127012423 Bench Top Mortiser w/Mobile Stand & 1/2" Chisel 3/4Hp; 1Ph; 115/230Volt
                        Cont Saw 10" 1.5hp Delta
                        $999
                        Cont Saw 10" 1.5hp Delta
                        Cont Saw 10" 1.5hp Delta Model: 36-979 [Delta] S/N: 316823 10" Contractor Saw Left Tilt w/Mobile Base; Router Table; Miter Gauge 1-1/2Hp; 1Ph; 115/230Volt
                        Haas ST-30 CNC Lathe with Barfeeder
                        $RFQ
                        Haas ST-30 CNC Lathe with Barfeeder
                        Haas ST-30 CNC Lathe with Barfeeder Year of Mfg: 2025 Control: Haas Chuck size: 10" hydraulic Max. part swing: 21" Max. cutting diameter: 15" Max. cutting length: 32.5" (varies with workhol
                        • Swing: 21"
                        • Centers: 32.5"
                          Fadal VMC 4020HT Vertical CNC Machining Center
                          $RFQ
                          Fadal VMC 4020HT Vertical CNC Machining Center
                          Fadal VMC 4020HT Vertical CNC Machining Center Year of Mfg: 1991 CNC Control: 88 Table: 48" X 20" Travels: (X) Axis: 40" (Y) Axis: 20" (Z) Axis: 24" Spindle Speed: 10,000 RPM Spin
                          • X axis: 40"
                          • Y axis: 20"
                            Haas ST-15Y CNC Lathe
                            $RFQ
                            Haas ST-15Y CNC Lathe
                            Haas ST-15Y CNC Lathe Year of Mfg: Oct. 2024 As Of April 2026: Power On: 52 Cycle Start: 6 Feed Cutting: 4 CNC Control: Haas Nextgen Max Swing: 16.5" Max Cutting Diameter: 11" Max Cutting Len
                            • Swing: 16.5"
                            • Centers: 16"
                              Haas EC-400PP CNC Horizontal Machining Center
                              $RFQ
                              Haas EC-400PP CNC Horizontal Machining Center
                              Haas EC-400PP CNC Horizontal Machining Center Year of Mfg: 2008 CNC Control: Haas Pallet Area: 15.75" x 15.75" Pallet Load: 1,000 lbs. Max. Travels: X Axis: 20" Y Axis: 20" Z Axis: 20&q
                              • X axis: 20"
                              • Y axis: 20"
                                2022 XCMG XE155UCR Excavator RTR# 6061694-01
                                $109,000
                                2022 XCMG XE155UCR Excavator RTR# 6061694-01
                                Unit located in Parker, CO. 2022 XCMG XE155UCR Excavator w/ (1) GRYP 42" Bucket, (1) 31" Bucket, (1) XCMG Coupler and (1) Hydraulic Thumb, Cummins QSB4.5 Diesel Engine, Hydraulic Transmission, Enclosed Cab, Ai
                                2023 XCMG XE300U Excavator RTR# 6061608-01
                                $150,000
                                2023 XCMG XE300U Excavator RTR# 6061608-01
                                Unit located in Parker, CO. 2023 XCMG XE300U Excavator w/ (1) 52" Bucket, (1) GRYB 24" Bucket, (1) XCMG Coupler, (1) Hydraulic Thumb, (1) 4 Disc Compactor Wheel Attachment, Cummins B6.7 Diesel Engine, Hydrauli
                                Drum Sander 16/32 w/Infd Otfd
                                $1,199
                                Drum Sander 16/32 w/Infd Otfd
                                Drum Sander 16/32 w/Infd Otfd Model: 629002 [Performax] S/N: 017433 16/32 Drum Sander w/Infeed Outfeed Tables & Mobile Stand 1Hp; 1Ph; 115Volt
                                Band Saw 14" 1hp C/S Jet
                                $899
                                Band Saw 14" 1hp C/S Jet
                                Band Saw 14" 1hp C/S Jet Model: 708705 JWBS-14 [Jet] S/N: 5097408 14" Band Saw Closed Stand w/Mobile Base; Light; Riser Block 1Hp; 1Ph; 115/230Volt
                                Drill Press 34" Radial Crftsmn
                                $349
                                Drill Press 34" Radial Crftsmn
                                Drill Press 34" Radial Crftsmn Model: 149.21334 [Craftsman] S/N: RF 34" Radial Drill Press Bench Top w/Mobile Stand; 5 Speed; 1/2" Chuck 1/2Hp; 1Ph; 115Volt
                                Lumber Rack Mobile ShtGd/Lmbr
                                $599
                                Lumber Rack Mobile ShtGd/Lmbr
                                Lumber Rack Mobile ShtGd/Lmbr 48" x 36" Mobile Lumber Rack; One Side for Sheet Goods; One Side w/4 Lumber Shelve
                                2022 XCMG XE155UCR Excavator w/ 24" Bucket RTR# 6061950-01
                                $105,000
                                2022 XCMG XE155UCR Excavator w/ 24" Bucket RTR# 6061950-01
                                Unit located in Parker, CO. 2022 XCMG XE155UCR Excavator, Cummins QSB4.5 Diesel Engine, GRYB Coupler, Hydraulic Thumb, Strickland BT29H 24" Bucket, Rockland WI24-3 Compactor Attachment, Hydraulic Transmission, E
                                Wet/Dry Cln Up Kit 9-77-25Fein
                                $69
                                Wet/Dry Cln Up Kit 9-77-25Fein
                                Wet/Dry Clean Up Kit 9-77-25 Fein
                                Dust Bag 5mc 9-55-13/9-77-25 F
                                $40
                                Dust Bag 5mc 9-55-13/9-77-25 F
                                Dust Bag 5mc 9-55-13/9-77-25 Fein
                                Multi-Master START Fein
                                $150
                                Multi-Master START Fein
                                Multi-Master START Fein
                                Dust Bag 5mc 9-11-55 Fein
                                $40
                                Dust Bag 5mc 9-11-55 Fein
                                Dust Bag 5mc 9-11-55 Fein
                                Blade Convex OLD STYLE Fein
                                $5
                                Blade Convex OLD STYLE Fein
                                Blade Convex OLD STYLE Fein
                                2024 XCMG XC958U Wheel Loader w/ Forks & Bucket RTR# 6061355-01
                                $157,500
                                2024 XCMG XC958U Wheel Loader w/ Forks & Bucket RTR# 6061355-01
                                Unit located in Parker, CO. 2024 XCMG XC958U Wheel Loader w/ (1 Set) Rockland UCF2 Forks & (1) 115" Loader Bucket, Cummins QSB6.7 Diesel Engine, Hyd Transmission, Enclosed Cab, Air Ride Seat, Rearview Camera
                                Blade Mini Cut/Dmnd OLD STYLE
                                $10
                                Blade Mini Cut/Dmnd OLD STYLE
                                Blade Mini Cut/Diamond OLD STYLE
                                Adaptor Fein to Festool Blades
                                $10
                                Adaptor Fein to Festool Blades
                                Adaptor Fein to Festool Blades
                                Blade Thin Carbide Fein
                                $20
                                Blade Thin Carbide Fein
                                Blade Thin Carbide Fein
                                Blade Segment HSS OLD STYLE
                                $5
                                Blade Segment HSS OLD STYLE
                                Blade Segment HSS OLD STYLE
                                Adapter Round to Star Fein
                                $5
                                Adapter Round to Star Fein
                                Adapter Round to Star Fein
                                Tool Kit US Multimaster
                                $69
                                Tool Kit US Multimaster
                                Tool Kit US Multimaster
                                2024 SkyJack SJ3226 Scissor Lift (Non-Op) RTR# 6063201-02
                                $5,000
                                2024 SkyJack SJ3226 Scissor Lift (Non-Op) RTR# 6063201-02
                                Equipment located in Apopka, FL. 2024 SkyJack SJ3226 Electric Scissor Lift (Non-Operational), 200lb Capacity, S/N: A101020664 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be
                                Chevalier 12" x 24" Automatic Surface Grinder
                                $RFQ
                                Chevalier 12" x 24" Automatic Surface Grinder
                                Chevalier 12" x 24" Automatic Surface Grinder S/N: 36460M, Mfg.: 1987, Stock No: 18395 Model: FSG-1224AD Grinding Capacity: 12" x 24" Spindle Centerline to Table Max: 24" Longitudinal Table
                                2024 SkyJack SJ3226 Electric Scissor Lift RTR# 6063201-01
                                $15,000
                                2024 SkyJack SJ3226 Electric Scissor Lift RTR# 6063201-01
                                Unit located in Apopka, FL. 2024 SkyJack SJ3226 Electric Scissor Lift, 500lb Capacity, Hour Meter Reads: 14.3 (Unverified), S/N: A101020666 All equipment is sold “As Is, Where Is”. Reasonable offers will be conside
                                2005 - 33 Ton Amada EMK-3510NT Servo Driven CNC Turret Punch
                                $RFQ
                                2005 - 33 Ton Amada EMK-3510NT Servo Driven CNC Turret Punch
                                Capacity 33 Tons Max Sheet Size 100"x60" Max Sheet Size w/ Reposition 200" x 60" Throat Depth 50" Travels (X-Axis) 100" Travels(Y-Axis) 60" Stroke 1.45" Max Sheet Thickness
                                • Tonnage: 33T
                                  2010 - 242 Ton Amada HDS-2204NT Hybrid Press Brake
                                  $RFQ
                                  2010 - 242 Ton Amada HDS-2204NT Hybrid Press Brake
                                  Capacity 242 Tons Overall Bending Length 168.5" Distance Between End Frames 148" Length of Stroke 9.8" Open Height 20.5" Throat Depth 17.7" Main Motor 200V Overall Dimensions 224.8 x 97 x
                                  • Tonnage: 242T
                                    2016 - 88 Ton Amada HD-8025NT CNC Hybrid Press Brake
                                    $RFQ
                                    2016 - 88 Ton Amada HD-8025NT CNC Hybrid Press Brake
                                    Capacity 88 Tons Overall Bending Length 101.2" Distance Between End Frames 83.5" Length of Stroke 7.9" Open Height 18.5" Throat Depth 16.5" Overall Dimensions 163 x 99 x 106"H Oil Tan
                                    • Tonnage: 88T
                                      2012 - 4000 Watt Amada LC-3015NT-F1 CNC Laser
                                      $RFQ
                                      2012 - 4000 Watt Amada LC-3015NT-F1 CNC Laser
                                      Max Sheet Size 5' x 10' Max Material Weight 2000 lbs. Max Material Thickness Carbon Steel: 1.25", SS: 0.750", Aluminum: 0.500" X Axis Travel 121" Y Axis Travel 61" Z Axis Travel 3.94
                                      • Wattage: 4000W
                                      • X axis travel: 10'
                                        2015 - 3000 Watt Salvagnini L3 Fiber Laser w/Automation
                                        $RFQ
                                        2015 - 3000 Watt Salvagnini L3 Fiber Laser w/Automation
                                        Resonator Wattage 3000 kW Max Sheet Size 5' x 10' Max Weight on Table 1,653 lbs. Working Height 38.58" Z Axis Travel 3.937" Cutting Capacities Mild Steel: .787” / Stainless Steel: .472” / Aluminum:
                                        • Wattage: 3000W
                                          IRM Four Head Brushing Machine with Recoiler
                                          $RFQ
                                          IRM Four Head Brushing Machine with Recoiler
                                          IRM Four Head Brushing Machine with RecoilerMaximum Strip Width: 4 Approx. Thickness Capacity: 0.125 Brushing Heads: Four, (2) Top , (2) Bottom, 2 Diameter Hardened Shafts Brush Size: 6 OD with 2 ID Wire Sup
                                          Reconditioned Star Chopper Single Head Brushing Machines - Top and Bottom of Metal Strip
                                          $RFQ
                                          Reconditioned Star Chopper Single Head Brushing Machines - Top and Bottom of Metal Strip
                                          Power 20 horsepower Reconditioned Star Chopper Brushing Machines - Top and Bottom of Me
                                          Clamp Set Tool Edge Guide
                                          $89
                                          Clamp Set Tool Edge Guide
                                          Clamp Set Tool Edge Guide Model: CT24C & CT50C [Tru-Grip] Tool Edge Guide Clamp Set: 24" & 50"
                                          Band Saw 14" 3/4Hp Rockwell
                                          $799
                                          Band Saw 14" 3/4Hp Rockwell
                                          Band Saw 14" 3/4Hp Rockwell Model: 28-203 [Rockwell] S/N: 83001719 Closed Stand 14" Band Saw; 6 Extra Blades; Mobile Base; Light 3/4Hp; 1Ph; 115/230Volt
                                          Wide Blt Sndr 37" Halsty
                                          $8,999
                                          Wide Blt Sndr 37" Halsty
                                          Wide Blt Sndr 37" Halsty Model: HWB3775 [Halsty] S/N: 804273725 37" Wide Belt Sander; Extra 80 & 120 Grit Belts 10Hp; 1Ph; 230Volt; Conveyor Motor: 3/4Hp 1Ph; 115/230Volt
                                          Fence 25" for Table Saw Delta
                                          $175
                                          Fence 25" for Table Saw Delta
                                          Fence 25" for Table Saw Delta Model: Jet Lock [Delta] Fence System for Table Saw w/Micro Adjust; 25" Cut Capacity
                                          Mortiser 1/2HP B/T Delta
                                          $299
                                          Mortiser 1/2HP B/T Delta
                                          Mortiser 1/2HP B/T Delta Model: 14-650 [Delta] S/N: P9331 Bench Top Mortise Machine 1/2Hp; 1Ph; 120Volt
                                          Dovetail Jig 24" w/Adj/Thru
                                          $399
                                          Dovetail Jig 24" w/Adj/Thru
                                          Dovetail Jig 24" w/Adj/Thru Model; D3-24 [Leigh] 24" Dovetail Jig w/Adjustable/Through Dovetails
                                          2024 Edwards 55 Ton Ironworker w/ PowerLink RTR# 6053014-01
                                          $10,000
                                          2024 Edwards 55 Ton Ironworker w/ PowerLink RTR# 6053014-01
                                          Equipment located in O’Fallon, MO. 2024 Edwards 55 Ton Ironworker w/ PowerLink, Four Station, Single Phase, 230v, 60Hz, Punch & Die Set (Incomplete), S/N: 1009924IW55 All equipment is sold “As Is, Where Is”. Reas
                                          Blue M 48"W x 36"H x 24"L, 662F
                                          $RFQ
                                          Blue M 48"W x 36"H x 24"L, 662F
                                          Blue M TPS cabinet oven, 48"W x 36"H x 24"L work area, 662F, model DC-1406-G-ST350, type 304 stainless steel interior, double door opening, horizontal air-flow, Yokogawa solid state temperature controls, s
                                          • Chamber width: 48"
                                          • Chamber length: 24"
                                            2020 GEHL RT185 Compact Track Loader (Non-Op) RTR# 6043630-01
                                            $18,500
                                            2020 GEHL RT185 Compact Track Loader (Non-Op) RTR# 6043630-01
                                            Unit located in Harriman, TN. 2020 GEHL RT185 Compact Track Loader (Non-Operational), Yanmar Tier IV Diesel Engine, Hyd Transmission, Open Cab, ROP, Hour Meter Reads: 1,285 (Unverified), S/N: GHLRT185K00231089 All equ
                                            2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift RTR# 4073800-01
                                            $6,500
                                            2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift RTR# 4073800-01
                                            Equipment located in Raleigh, NC. 2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift, Deutz 64HP Diesel Engine, 500lb Capacity, Hour Meter Reads: 93 (Unverified), SN: 97000452 All equipment is sold “As Is, Where Is”.
                                            Precision Quincy Walk-in Oven 73"W x 72" x 72", 650F
                                            $RFQ
                                            Precision Quincy Walk-in Oven 73"W x 72" x 72", 650F
                                            Precision Quincy high performance walk-in oven model HD5BE-0606-06, double door opening, 73"W x 72"H x 72"L work area, 650F,  aluminized steel interior, insulated floor with wheel guide channels, comb
                                            • Chamber width: 73"
                                            • Chamber length: 72"
                                              2024 Cougar CG827 Mini Stand-On Skid Steer RTR# 6063456-01
                                              $13,000
                                              2024 Cougar CG827 Mini Stand-On Skid Steer RTR# 6063456-01
                                              Equipment located in Raleigh, NC. 2024 Cougar CG827 Mini Track Stand-On Skid Steer Loader w/ Bucket, Perkins Diesel Engine, Hyd Transmission, Hour Meter Reads: 47 (Unverified), S/N: CG827 029089J All equipment is so
                                              Bridgeport Model J Milling Machine
                                              $2,200
                                              Bridgeport Model J Milling Machine
                                              Bridgeport Model J, Serial No. 21584, 9“ x 42“ Table w/ Lyman MK4 X- Axis Table Feed . Included w/ Milling Machine are a Coronet Milling Machine Vise, 6 inch jaws and a Phase-O-Matic Model PAM-300HD 220 V Phase Conver
                                              2025 CMC 90HD+Arbor Pro Track Aerial Lift RTR# 6053284-01
                                              $140,000
                                              2025 CMC 90HD+Arbor Pro Track Aerial Lift RTR# 6053284-01
                                              Unit located in Clifton, NJ. 2025 CMC 90HD+Arbor Pro Track Aerial Lift, Kubota D-902 Diesel Engine, Hyd Transmission, Remote, Chassis Self Leveling System, Platform Control Station, Hour Meter Reads: 293 (Unverified),
                                              2022 Kershaw SkyTrim Mini 55TH Tree Trimmer RTR# 6053521-01
                                              $70,000
                                              2022 Kershaw SkyTrim Mini 55TH Tree Trimmer RTR# 6053521-01
                                              Unit located in Jacksonville, FL. 2022 Kershaw SkyTrim Mini 55TH Tree Trimmer, Deutz TD 2.9L L4 Diesel Engine, Hyd Transmission, Enclosed Cab, ROPS, Boom, AC/ Heater, Hour Meter Reads: 363 (Unverified), S/N: 55TH-141-2
                                              2019 Hyster E50XN-33 Electric Forklift (Non-op) RTR# 6054330-02
                                              $3,000
                                              2019 Hyster E50XN-33 Electric Forklift (Non-op) RTR# 6054330-02
                                              Unit located in O’Fallon, MO. 2019 Hyster E50XN-33 Electric Forklift (Non-Operational), 4,800Lbs Capacity, 3 Stage 187" Mast, Tilt, Fork Positioning, Side Shift, Hour Meter Reads: 4,482.8 (Unverified), S/N: A268N26
                                              2022 Wacker Neuson RC70 Single-Drum Roller RTR# 6033342-01
                                              $48,500
                                              2022 Wacker Neuson RC70 Single-Drum Roller RTR# 6033342-01
                                              Unit located in Stoney Creek. VA. 2022 Wacker Neuson RC70 Single-Drum Vibratory Roller, Kubota V3307-CR-TE5B Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, Air Ride Seat, ROP, Hour Meter Reads: 332 (Unverif
                                              Clark 10,000 Lb. Forklift, Cap 10,000 Lbs., Lift Height 144"
                                              $RFQ
                                              Clark 10,000 Lb. Forklift, Cap 10,000 Lbs., Lift Height 144"
                                              Clark 10,000 Lb. Forklift S/N: 915-38-3030 Mfg. 1975 Stock No: 18392 Model: C500-100 Capacity: 10,000 Lbs. Lift Height: 144" Fork Length: 48" Fuel: Propane Engine: Inline 6 Cylinder Two Stage Mast Cush
                                              • Lifting capacity: 5T
                                              • Lift height: 12'
                                                Jointer 6" 1hp Byrd HH Oliver
                                                $1,499
                                                Jointer 6" 1hp Byrd HH Oliver
                                                Jointer 6" 1hp Byrd HH Oliver Model: M4225.201 [Oliver] S/N: 215835 6" Parallelogram Helical Head Jointer w/Mobile Base 1Hp; 1Ph; 115/230Volt
                                                2019 Hyster E50XN-33 4,800Lbs Cap Elec Forklift RTR# 6054330-01
                                                $6,000
                                                2019 Hyster E50XN-33 4,800Lbs Cap Elec Forklift RTR# 6054330-01
                                                Equipment located in O’Fallon, MO. 2019 Hyster E50XN-33 4,800Lbs Capacity Electric Forklift, 3 Stage 187" Mast, Tilt, Fork Positioning, Side Shift, Hour Meter Reads: 6,686 (Unverified), 48V Battery, S/N: A268N26338
                                                Dust Collector .75/1 WallMnt
                                                $499
                                                Dust Collector .75/1 WallMnt
                                                Dust Collector .75/1 WallMnt Model: 52525 UB50P [Chang Tjer/Rockler] S/N: D14060425 Wall Mount Dust Collector w/Canister 3/4Hp; 1Ph; 110Volt
                                                • Motor: 0.75HP
                                                  Cab Saw 10x50 3/1 LTw/MblBs
                                                  $2,999
                                                  Cab Saw 10x50 3/1 LTw/MblBs
                                                  Cab Saw 10x50 3/1 LTw/MblBs Model: GO6051 [Grizzly] S/N: 173765 10" x 50" Left Tilt w/Mobile Base; Rear Extension Table 3Hp; 1Ph; 230Volt
                                                  Dust Coll w/Canister Grizzly
                                                  $399
                                                  Dust Coll w/Canister Grizzly
                                                  Dust Coll w/Canister Grizzly Model: GO583Z [Grizzly] S/N: M132674 Dust Collector w/Canister; 4" x 10' Hose 1Hp; 1Ph; 120/240Volt
                                                  • Motor: 1HP
                                                    Motor 3/4hp Dayton
                                                    $199
                                                    Motor 3/4hp Dayton
                                                    Motor 3/4hp Dayton Model: 5K117AC [Dayton] S/N: R605914C 3/4Hp; 1Ph; 115/230Volt
                                                    Lathe 14"x40" VS Lobo
                                                    $1,899
                                                    Lathe 14"x40" VS Lobo
                                                    Lathe 14"x40" VS Lobo Model: N/A [Lobo] S/N: N/A 14 x 40 Variable Speed Lathe; 3 Tool Rests; 2 Live Centers; 6" Face Plate; Spur Drive; Drill Chuck; Robert Sorby Chuck Set; 3 Chisels 3/4Hp; 1Ph; 115/2
                                                    Lathe 20"x38" 5-Spd Wdfst
                                                    $1,899
                                                    Lathe 20"x38" 5-Spd Wdfst
                                                    Lathe 20"x38" 5-Spd Wdfst Model: M910 [Woodfast] S/N N/A 20 x 38 5-Speed Lathe; 3 Tool Rests; 2 Live Centers; Chuck; 3" Face Plate; 4 Chisels 1-1/2Hp; 1Ph; 115/230Volt
                                                    2006 Valmet 840.3 6WD Forwarder RTR# 6034045-01
                                                    $52,000
                                                    2006 Valmet 840.3 6WD Forwarder RTR# 6034045-01
                                                    Unit located in Gaylord, MI. 2006 Valmet 840.3 6WD Forwarder w/ Boom & Grapple, Sisu Diesel Engine, Hyd Transmission, Enclosed Cab, Blade, Power Steering, Brakes, A/C, Heater, AM/FM Radio, Hour Meter Reads: 26,15
                                                    Est. 1995 Morbark 20WCL Whole Tree Chipper RTR# 6043587-01
                                                    $12,000
                                                    Est. 1995 Morbark 20WCL Whole Tree Chipper RTR# 6043587-01
                                                    Unit located in South Hadley, MA. Est. 1995 Morbark 20WCL Whole Tree Chipper w/ KnuckleBoom Loader (Non-Running), Caterpillar 3406B Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, Blade, Feeder, Rop, Hour
                                                    2024 Baileigh SH-5210 Sheet Metal Shear RTR# 6043441-01
                                                    $7,500
                                                    2024 Baileigh SH-5210 Sheet Metal Shear RTR# 6043441-01
                                                    Equipment located in O’Fallon, MO. 2024 Baileigh SH-5210 Hydraulic Sheet Metal Shear, 10 Gauge, 1PH/220V/60HZ/36AMP, S/N: 481957 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can
                                                    2022 Iron Rhino IR1000WL Compact Wheel Loader RTR# 6013832-01
                                                    $15,000
                                                    2022 Iron Rhino IR1000WL Compact Wheel Loader RTR# 6013832-01
                                                    Unit located in Mulberry, FL. 2022 Iron Rhino IR1000WL Compact Wheel Loader w/ Mini 750 Grapple, Kubota D1105 Diesel Engine, Hyd Transmission, Open Cab, Power Steering, ROP, Hour Meter Reads: 66 (Unverified), S/N: 2201
                                                    2024 Baileigh 10' Heavy Duty Box & Pan Brake RTR# 6043441-02
                                                    $5,500
                                                    2024 Baileigh 10' Heavy Duty Box & Pan Brake RTR# 6043441-02
                                                    Equipment located in O’Fallon, MO. 2024 Baileigh 10 Foot Heavy Duty Box & Pan Brake, 16 Gauge, Model: BB-12016, S/N: 28767 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be i
                                                    BurnTables 4x8 CNC w/ Hypertherm Powermax65 RTR# 6043126-01
                                                    $6,000
                                                    BurnTables 4x8 CNC w/ Hypertherm Powermax65 RTR# 6043126-01
                                                    Equipment located in O’Fallon, MO. Est. 2023 BurnTables 4x8 CNC Plasma Table w/ Gen5 Technology & 2023 Hypertherm Powermax65 SYNC Plasma Cutter, S/N: 2044 All equipment is sold “As Is, Where Is”. Reasonable offers
                                                    2022 Kubota SVL97-2 Track Loader w/ Extas RTR# 6053945-01
                                                    $40,000
                                                    2022 Kubota SVL97-2 Track Loader w/ Extas RTR# 6053945-01
                                                    Unit located in Thonotosassa, FL. 2022 Kubota SVL97-2 Compact Track Loader w/ Pallet Forks, Root Grapple & Bucket, Kubota V3800-TIEF4 Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, Air Ride Seats, Rops,
                                                    (2) RoboVent FUSHION 3 Model DTS-10000-8,(8)CARTRIDGE UNIT DUST COLLECTOR,
                                                    $RFQ
                                                    (2) RoboVent FUSHION 3 Model DTS-10000-8,(8)CARTRIDGE UNIT DUST COLLECTOR,
                                                    (2) RoboVent FUSHION 3 Model DTS-10000-8,(8)CARTRIDGE UNIT DUST COLLECTOR, MFG.2014 SPECIFICATIONS: CAPACITY 10,000 cfm FILTER CARTRIDGES: 8 MEDIA AREA: 4,096 sq. ft. APPROX. DIMENSIONS: 83” d x 49” w
                                                    • Motor: 30HP
                                                      1998 - 8 Ton Haeger 824 Hardware Insertion Press
                                                      $9,950
                                                      1998 - 8 Ton Haeger 824 Hardware Insertion Press
                                                      Max. Tonnage 8 Tons Throat Depth 24" Stroke Length 0.8.5" (Adjustable) Speed 40 SPM at 1" stroke Main Motor 3 HP Overall Dimensions 3'x4'x6'H Weight (approx.) 1800 lbs. Description Equi
                                                      • Tonnage: 8T
                                                      • Throat: 24"
                                                        1999 - 6 Ton Haeger 618 Hardware Insertion Press
                                                        $9,950
                                                        1999 - 6 Ton Haeger 618 Hardware Insertion Press
                                                        Capacity 6 Tons Throat Depth 18" Stroke 0 - 8" Weight (Approx) 1,600 lbs. Description Equipped with: Foot Pedal Bowl Feed
                                                        • Tonnage: 6T
                                                        • Throat: 18"
                                                          1992- 55 Ton Amada RG-50 CNC Press Brake
                                                          $22,500
                                                          1992- 55 Ton Amada RG-50 CNC Press Brake
                                                          Capacity 55 Tons Overall Bending Length 82" Distance Between Housings 59.84" Stroke 3.9" Open Height 14.57" Throat 15.75" Closed Height 10.67" Main Motor 5 HP Dimensions 80" x 5
                                                          • Tonnage: 55T
                                                            1996- 55 Ton Amada RG-50 CNC Press Brake
                                                            $22,500
                                                            1996- 55 Ton Amada RG-50 CNC Press Brake
                                                            Capacity 55 Tons Overall Bending Length 82" Distance Between Housings 59.84" Stroke 3.9" Open Height 14.57" Throat 15.75" Closed Height 10.67" Main Motor 5 HP Dimensions 80" x 5
                                                            • Tonnage: 55T
                                                              1984 - 88 Ton Amada RG-80S CNC Press Brake
                                                              $22,500
                                                              1984 - 88 Ton Amada RG-80S CNC Press Brake
                                                              Capacity 88 Tons Overall Bending Length 80" Distance Between End Frames 59.9" Length of Stroke 3.9 Open Height 14.57" Shut Height 10.67" Throat Depth 15.7" Overall Dimensions 80.4" x
                                                              • Tonnage: 88T
                                                                2016 - 44 Ton x 4' Ermak Power Bend Pro CNC Press Brake
                                                                $29,500
                                                                2016 - 44 Ton x 4' Ermak Power Bend Pro CNC Press Brake
                                                                Capacity 44 Tons Overal Bending Length 49.7" Distance Between Columns 39.4" Throat 13.8" Daylight 15.2" Stroke 6.7" Approach Speed 5.51 IPS Bending Speed .67 IPS Return Speed 6.69 IPS El
                                                                • Tonnage: 44T
                                                                  1984 - 88 Ton Amada RG-80S CNC Press Brake
                                                                  $22,500
                                                                  1984 - 88 Ton Amada RG-80S CNC Press Brake
                                                                  Capacity 88 Tons Overall Bending Length 80" Distance Between End Frames 59.9" Length of Stroke 3.9 Open Height 14.57" Shut Height 10.67" Throat Depth 15.7" Overall Dimensions 80.4" x
                                                                  • Tonnage: 88T
                                                                    2016 - 110 Ton x 8.5' Ermak Power Bend Falcon CNC Press Brake
                                                                    $42,500
                                                                    2016 - 110 Ton x 8.5' Ermak Power Bend Falcon CNC Press Brake
                                                                    Capacity 110 Tons Overall Bending Length 102" Distance Between Columns 86.6" Throat 16.1" Daylight 20.9" Stroke 10.8" Approach Speed 7.87 IPS Bending Speed .37 IPS Return Speed 6.10 IPS
                                                                    • Tonnage: 110T
                                                                      2015 - 149 Ton x 10' Ermak Speed Bend CNC Press Brake
                                                                      $44,500
                                                                      2015 - 149 Ton x 10' Ermak Speed Bend CNC Press Brake
                                                                      Capacity 150 Tons Overall Bending Length 10.17" Distance Between Housings 102.4" Y Rapid Speed 7.87 Y Working Speed .47 Y Return Speed 7.48 Travel in X Axis 31.5 Speed of X Axis 19.7 Speed of Z1,Z2 Axes
                                                                      • Tonnage: 149T
                                                                        24" Timesaver Belt Graining/Grinding Machine
                                                                        $RFQ
                                                                        24" Timesaver Belt Graining/Grinding Machine
                                                                        Width of Belt 25" Sanding Belt Size 25" x 60" Max. Part Height 5" Infeed Speed 15 - 40 FPM Main Motor 10 HP Dimensions (approx) 48 x 48 x 72"H Weight (Approx) 1,800 lbs.
                                                                        • Belt width: 25"
                                                                          MINSTER Super Speed OBS 60 ton OBI Press, Model 6SS-FB
                                                                          $RFQ
                                                                          MINSTER Super Speed OBS 60 ton OBI Press, Model 6SS-FB
                                                                          Specifications Capacity ............................................. 60 Ton Stroke ................................................. 4 in. Speed ................................................. 90 - 180 SPM Variable
                                                                          • Tonnage: 60T
                                                                          • Stroke: 4"
                                                                            73 HP AirHorse BPM-75A Rotary Screw Compressor *NEW*
                                                                            $RFQ
                                                                            73 HP AirHorse BPM-75A Rotary Screw Compressor *NEW*
                                                                            Motor Power 73 HP Air Flow 185 CFM Working Pressure 232 PSI Outlet Diameter 2" Overall Dimensions (approx.) 6 x 4 x 5'H Weight (Approx) 2,000 lbs. Equipped with: Compressor Dryer Tank Line Filters
                                                                            • Motor: 73HP
                                                                              2015 Hurco VM-10i CNC Machining Center
                                                                              $RFQ
                                                                              2015 Hurco VM-10i CNC Machining Center
                                                                              Table Size 30 x 16" X Axis Travel 26" Y Axis Travel 16" Z-Axis Travel 20" Spindle Speed 10,000 RPM Spindle Taper 40 Taper Tool Changer 24 ATC Main Motor 15 HP Weight (approx) 6,200 lbs. Equ
                                                                              • X axis: 26"
                                                                              • Y axis: 16"
                                                                                Categories:
                                                                                Condition:
                                                                                Manufacturer:
                                                                                Location:
                                                                                Price:
                                                                                •  to 
                                                                                1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>