buy & sell, new & used machinery, machine tools & equipment

<Prev | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | Next>
Refine: Viewing 3301 - 3400 of 20764 matches
Sort by:
Items Per Page:  20 |  50 |  100
TONFOU TF3B-6A5 HYDRAUYLIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAUYLIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3B-6A5 HYD POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYD POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
1976 - SUNNEN MBB1800 HORIZONTAL HONE - .060" - 6.5"
$RFQ
1976 - SUNNEN MBB1800 HORIZONTAL HONE - .060" - 6.5"
SPECIFICATIONS I.D. RANGE: .060″ – 6.5″ LENGTH RANGE: BORES UP TO 16″ IN LENGTH, DEPENDING ON BORE DIAMETER STROKING RATES: 80, 110, 160, 220, 310 SPM SPINDLE SPEEDS: 200, 250, 320, 400, 500, 640, 800, 1000, 1270, 1600,
  • Maximum diameter: 6.5"
  • Stroke: 16"
    1990 - HARDINGE CHNCI GANG TOOL CNC LATHE - 1.625" 16C COLLET CAPACITY
    $RFQ
    1990 - HARDINGE CHNCI GANG TOOL CNC LATHE - 1.625" 16C COLLET CAPACITY
    SPECIFICATIONS SPINDLE SPINDLE CONFIGURATION: ANSI A2-5″ HOLE THROUGH SPINDLE: 1.875″ 16C COLLET CAPACITY: 1-5/8″ SPINDLE SPEED RANGE (1-RPM STEPS): 50 TO 5000 RPM AC SPINDLE DRIVE (30-MINUTE RATING): 10 HP CAPACITY MA
    • Swing: 14"
    • Centers: 12"
      DAKE 5025 H-FRAME HYD PRESS - 25 TON
      $RFQ
      DAKE 5025 H-FRAME HYD PRESS - 25 TON
      SPECIFICATIONS CAPACITY: 25 TONS HORSEPOWER: 2 HP RPM: 1,800 RPM RAM SPEED (ADVANCE): 80 IPM RAM SPEED (PRESS): 14 IPM WIDTH BETWEEN UPRIGHTS: 32-3/4″ WIDTH BETWEEN TABLE CHANNELS: 7 1/4″ MINIMUM RAM TO TABLE: 5″ MAXIMUM
      • Tonnage: 25T
        TECHNIKS RADAX HSK 63A HYD TOOLHOLDERS - (4) HSK63A
        $RFQ
        TECHNIKS RADAX HSK 63A HYD TOOLHOLDERS - (4) HSK63A
        LOT OF 4 TECHNIKS 93.05.037.012 HSK63A RADAX HYDRO 12mm X 90 mm TOOLHOLDERS NOTE: PRICE NEW $ 600.00 EACH THESE ARE NEW, NEVER USED. STILL IN ORIGINAL SEALED PLASTIC BAGS784
        AKEBONO MINC-26 GANG TOOL CNC LATHE - 1-1/16"
        $RFQ
        AKEBONO MINC-26 GANG TOOL CNC LATHE - 1-1/16"
        SPECIFICATIONS SIZE OF T-SLOTTED SLIDE: 16″ X 7-1/2″ TRAVEL (X) APPROX.: 9″ TRAVEL (Z) APPROX.: 9″ SPINDLE CAPACITY: 1-1/16″ MAXIMUM SPINDLE SPEED: 6,000 RPM ELECTRICS: 220V, 3 PH, 60 CYCLE EQUIPPED WITH FANUC OT CONTR
        • Swing: 9"
        • Centers: 9"
          HARIG 618 SURFACE GRINDER - 6" X 18"
          $RFQ
          HARIG 618 SURFACE GRINDER - 6" X 18"
          SPECIFICATIONS LONGITUDINAL TRAVEL: 18-3/4″ CROSSFEED TRAVEL: 6-3/4″ HYDRAULIC LONGITUDINAL TRAVEL: 0 – 70 FPM VERTICAL WORKING HEIGHT (UNDER 7″ WHEEL): 12″ PLATEN WORKING AREA: 6″ X 18″ GRINDING WHEEL, STANDARD: 7″ X 1/
          • Table width: 6"
          • Table length: 18"
            HARDINGE 6 POSITION BED TURRET - FOR DV-59
            $RFQ
            HARDINGE 6 POSITION BED TURRET - FOR DV-59
            SPECIFICATIONS 6 POSITION 5/8″ HOLE DIAMETER
            2000 - LOGANSPORT MDAT173DS-02 2-AXIS N/C ROTARY TILTING TABLE - 6.9"
            $RFQ
            2000 - LOGANSPORT MDAT173DS-02 2-AXIS N/C ROTARY TILTING TABLE - 6.9"
            SPECIFICATIONS TABLE DIAMETER: 6.9″ TABLE HEIGHT IN HORIZONTAL: 10.4″ OVERALL HEIGHT AT 90° TILTED: 13″ CENTER HEIGHT AT 90° TILTED: 8.3″ THRU HOLE DIAMETER: 0.7″ WIDTH OF GUIDE BLOCK: 0.7″ PERMISSIBLE LOAD: 66 LBS GEAR
            • Diameter or width: 6.9"
            • Length: 6.9"
              1990 - CLAUSING 1639 MULTI SPINDLE DRILL - 15" 3 SPINDLE
              $RFQ
              1990 - CLAUSING 1639 MULTI SPINDLE DRILL - 15" 3 SPINDLE
              SPECIFICATIONS THROAT DEPTH: 7-1/2″ DRILLING CAPACITY CAST IRON: 5/8″ MILD STEEL: 1/2″ SPINDLE TAPER: #2 MT SPINDLE TRAVEL: 4-3/4″ SPINDLE SPEEDS (5) W/STEP PULLEY DRIVE: 260 – 1800 RPM ELECTRICS: 440 VOLTS, 3PH, 60 CYC
              • # Spindles: #3
                IBP BROWN CUT-OFF SAW - 12"
                $RFQ
                IBP BROWN CUT-OFF SAW - 12"
                SPECIFICATIONS MOTOR: 2.5/3 HP SPINDLE: 30/60 RPM MAXIMUM BLADE DIAMETER: 12″ MAXIMUM VISE OPENING: 5-1/2″ EQUIPPED WITH MANUAL DOWNFEED AIR VISE SWIVEL HEAD ARRANGED FOR COOLANT, BUT MISSING PUMP & TANK
                • Blade diameter: 12"
                  USED SOLBERGA SE1735 GH SINGLE SPINDLE DRILL - 24"
                  $RFQ
                  USED SOLBERGA SE1735 GH SINGLE SPINDLE DRILL - 24"
                  SPECIFICATIONS DRILLS TO CENTER OF CIRCLE: 24″ DRILLING CAPACITY IN CAST IRON: 1-1/2″ DRILLING CAPACITY IN MILD STEEL: 1″ SPINDLE TRAVEL: 6″ SPINDLE TAPER: NO. 3 MT LOW SPINDLE SPEEDS: 60, 160, 260, 715 RPM HIGH SPINDLE
                  • Swing: 24"
                  • Motor: 2.2HP
                    NEW - KALAMAZOO S612-3 COMBINATION SANDER - 6"BELT/12"DISC
                    $RFQ
                    NEW - KALAMAZOO S612-3 COMBINATION SANDER - 6"BELT/12"DISC
                    SPECIFICATIONS BELT MACHINE WORK TABLE – CAST IRON: 6″ X 10″ WITH 1/2″ X 1/8″ SLOT PLATEN – STEEL: 6-1/2″ X 14″ BELT: 6″ X 48″, 2800 SFPM DISC MACHINE WORK TABLE- CAST IRON: 8″ X 14″ DISC – ALUMINUM: 12″, 5/8″ ARBOR, 25
                    • Width: 6"
                      UTE EF-104 RAM END FORMING SYSTEM - 1"
                      $RFQ
                      UTE EF-104 RAM END FORMING SYSTEM - 1"
                      APPLICABLE ENDFORM EXAMPLES SINGLE / DOUBLE FLARES CAPTURED / BUBBLE / STRAIGHT BEADS BELLED ENDS INCLUDING 3-STEP BELLS SADDLES REDUCTIONS EXPANSIONS SPECIFICATIONS CAPACITY (IN. X WALL IN.) STEEL: 1.00″ X .095″ STAINL
                      1988 - DENISON MULTIPRESS MODEL WUPA-1TR HYDRAULIC C-FRAME PRESS, 1 TON
                      $RFQ
                      1988 - DENISON MULTIPRESS MODEL WUPA-1TR HYDRAULIC C-FRAME PRESS, 1 TON
                      SPECIFICATIONS CAPACITY: 1 TON STROKE: 3″ DAYLIGHT: 8-1/4″ THROAT: 4-1/2″ ELECTRIC MOTOR: 3/4 HP RESERVOIR CAPACITY: 12 QUART BASE PLATE AREA: 9″ X 10″ GENERAL ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH PALM BUTT
                      • Tonnage: 1T
                      • Stroke: 3"
                        (2) MID-STATE TOMBSTONE FIXTURES - 5.75" X 25.25"
                        $RFQ
                        (2) MID-STATE TOMBSTONE FIXTURES - 5.75" X 25.25"
                        SPECIFICATIONS CLAMPING SURFACE (4-SIDES): 5.75″ X 25.25″ MOUNTED ON 19-11/16″ PALLET
                        TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                        $RFQ
                        TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                        SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                        TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                        $RFQ
                        TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                        SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                        TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                        $RFQ
                        TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                        SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                        TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                        $RFQ
                        TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                        SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                        TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                        $1,500
                        TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                        SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                        TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                        $RFQ
                        TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                        SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                        TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                        $RFQ
                        TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                        SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS
                        1969 - DO-ALL 2612-H VERT BANDSAW - 26"
                        $RFQ
                        1969 - DO-ALL 2612-H VERT BANDSAW - 26"
                        SPECIFICATIONS THROAT: 26″ WORK HEIGHT UNDER GUIDE: 12″ T-SLOTTED, TILTING TABLE: 24″ X 30-1/2″ BLADE SPEEDS: 25 – 6000 SFM (3 RANGES) BLADE WIDTH CAPACITY: 1/16″ – 1″ BLADE LENGTH: 177″ ELECTRICS: 220 VOLTS, 3 PH, 60 C
                        • Throat capacity: 26"
                        • Height capacity: 12"
                          1990 CHAMPION MODEL HRA25-12 AIR COMPRESSOR, 25 HP
                          $RFQ
                          1990 CHAMPION MODEL HRA25-12 AIR COMPRESSOR, 25 HP
                          SPECIFICATIONS MOTOR: 25 HP PUMP MODEL: R-70A 125 PSI RATING: 890 RPM, 127.8 CFM DISP, 102.1 CFM DEL 175 PSI RATING: 770 RPM, 109.4 CFM DISP, 90.1 CFM DEL ELECTRICS: 440 VOLTS, 3 PH, 60 CYC, 5 HP EQUIPPED WITH 120 GALLO
                          LIPE-ROLLWAY 225 PNEUMATIC BARFEED - `1-5/8" X 2'
                          $RFQ
                          LIPE-ROLLWAY 225 PNEUMATIC BARFEED - `1-5/8" X 2'
                          SPECIFICATIONS MAX. BAR LENGTH: 2 FT. MAX. BAR DIAMETER: 1-5/8″ GENERAL WEIGHT, APPROX: 300 LBS
                          • Maximum bar diameter: 1.625"
                          • Maximum bar length: 2'
                            USED NIAGARA 4' HORIZONTAL SHEET METAL GROOVER - 4 FT
                            $RFQ
                            USED NIAGARA 4' HORIZONTAL SHEET METAL GROOVER - 4 FT
                            SPECIFICATIONS GROOVES: 1″ X 4′ 1/2″ X 4′ 3/8″ X 4′ 1/4″ X 4′ GENERAL DIMENSIONS: 5′ L-R X 1′ F-B X 3′ H WEIGHT, APPROX: 300 LBS EQUIPPED WITH STAND
                            1950 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                            $RFQ
                            1950 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                            SPECIFICATIONS SPINDLE SPINDLE CONSTRUCTION: HARDINGE PRELOADED, BALL BEARING SPINDLE CAPACITY W/ROUND 5C COLLETS: 1-1/16″ VARIABLE SPINDLE SPEEDS: 230 TO 3,500 RPM CAPACITY BED LENGTH (FROM SPINDLE FACE): 36″ SWING OVE
                            • Swing: 9"
                            • Centers: 17"
                              J & S RFG-55 F-SERIES WHEEL DRESSER - 8"
                              $RFQ
                              J & S RFG-55 F-SERIES WHEEL DRESSER - 8"
                              SPECIFICATIONS MAX. WHEEL DIAMETER: 8″ LENGTH ANGULAR TRAVEL: 1-3/8″ FIXED DIAMOND HEIGHT ABOVE TABLE: 5-1/2″ BASE DIMENSION: 3-3/16″ X 4″ EQUIPPED WITH 2 DIAMONDS G MICROMETER BASE CARRYING CASE
                              1993 - FEELER FTS-27 SECOND OPERATION LATHE - 9" X 36"
                              $RFQ
                              1993 - FEELER FTS-27 SECOND OPERATION LATHE - 9" X 36"
                              SPECIFICATIONS SPINDLE CAPACITY WITH ROUND 5C COLLETS: 1 1/16″ VARIABLE SPINDLE SPEEDS: 230 3500 RPM LENGTH OF BED: 36″ SWING OVER BED: 9″ TRAVEL OF DOUBLE TOOL CROSS SLIDE: 3 3/4″ TRAVEL OF TURRET SLIDE: 4″ DIAMETER O
                              • Swing: 9"
                              • Centers: 36"
                                1978 - ROUSSELLE 10 FLYWHEEL TYPE OBI PRESS - 110 TON
                                $RFQ
                                1978 - ROUSSELLE 10 FLYWHEEL TYPE OBI PRESS - 110 TON
                                SPECIFICATIONS CAPACITY: 110 TON BED AREA: 40″ L-R X 28″ F-B BED OPENING (RECTANGULAR): 22″ X 16″ BED OPENING (ROUND) DIA.: 19″ WIDTH OF OPENING THROUGH BACK: 20″ DEPTH OF THROAT FROM CENTER LINE OF SLIDE: 14-3/4″ WIDTH
                                • Tonnage: 110T
                                • Stroke: 3"
                                  NEW- HYD-MECH TYPE 2 IDLER CONVEYOR - 5'
                                  $RFQ
                                  NEW- HYD-MECH TYPE 2 IDLER CONVEYOR - 5'
                                  SPECIFICATIONS 5′ IDLER ROLLER CONVEYOR FOR HYD-MECH H-10A, H-14A, S-20A, A23
                                  TORIT DMC-B DRYFLO OIL & MIST COLLECTOR - 630 CFM
                                  $RFQ
                                  TORIT DMC-B DRYFLO OIL & MIST COLLECTOR - 630 CFM
                                  SPECIFICATIONS MAXIMUM AIRFLOW: 630 CFM HEIGHT WITH LEGS: 79″ DEPTH: 29″ WIDTH: 28″ THIRD STAGE CARTRIDGE FILTER AREA: 82 (SQ FT) NUMBER OF CARTRIDGES: 1 GENERAL SHIPPING WEIGHT, APPROX: 500 LBS ELECTRICS: 110 VOLTS, 1
                                  1953 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                                  $RFQ
                                  1953 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                                  SPECIFICATIONS SPINDLE CAPACITY / 5C ROUND: 1-1/16″ BED LENGTH: 36″ SWING OVER BED: 9″ SPINDLE SPEEDS: 230 TO 3,500 RPM (8 STEPS) GENERAL DIMENSIONS: 67″ L-R X 32″ F-B X 57″ H WEIGHT, APPROX 1,550 LBS ELECTRICS: 220 VO
                                  • Swing: 9"
                                  • Centers: 36"
                                    1953 - TAFT-PEIRCE 1 MANUAL SURFACE GRINDER - 5" X 12"
                                    $RFQ
                                    1953 - TAFT-PEIRCE 1 MANUAL SURFACE GRINDER - 5" X 12"
                                    SPECIFICATIONS TABLE WORKING SURFACE: 5″ X 12″ TABLE OVERALL: 33-1/4″ X 8″ T-SLOT IN TABLE CENTER: 1/2″ TABLE HEIGHT ABOVE FLOOR: 38-1/4″ TABLE HEIGHT ABOVE FLOOR W/SUB-BASE: 42-1/4″ WORK HEIGHT UNDER WHEEL: 12″ WHEEL: 7
                                    • Table width: 5"
                                    • Table length: 12"
                                      EVERETT ABRASIVE CUT-OFF SAW - 10"
                                      $RFQ
                                      EVERETT ABRASIVE CUT-OFF SAW - 10"
                                      SPECIFICATIONS WHEEL CAPACITY: 10″ WHEEL ARBOR SHAFT: 5/8″ ARBOR DRIVE: DUAL RAW EDGE SURE GRIP “V” BELT WITH STEEL SHEAVES CAPACITY: 1-1/2″ SOLID 2″ PIPE MOTOR: 3 HP SPECIAL HI-TORQUE MOTOR TOTALLY ENCLOSED FAN-COOLED S
                                      • Blade diameter: 10"
                                        BROWN & SHARPE MICROMASTER 612 HAND FEED GRINDER - 6" X 12"
                                        $RFQ
                                        BROWN & SHARPE MICROMASTER 612 HAND FEED GRINDER - 6" X 12"
                                        SPECIFICATIONS GRINDING CAPACITY: 6” W X 12” L HEIGHT OF WORK GROUND WITH WHEEL – 8” OD X 1-1/4” HOLE: 12” DISTANCE – CENTER OF WHEEL SPINDLE TO TOP OF TABLE: 16” MAX – 3.5” MIN SPINDLE ANTI-FRICTION BEARING UNIT WITH O
                                        • Table width: 6"
                                        • Table length: 12"
                                          1977 - COILMATIC AIR FEED WITH PULL THRU STRAIGHTNER - 24" X .090"
                                          $RFQ
                                          1977 - COILMATIC AIR FEED WITH PULL THRU STRAIGHTNER - 24" X .090"
                                          SPECIFICATIONS CAPACITY: 24″ X .090″ FEED STROKE, ADJUSTABLE: 0″ – 15″ FEED RATES: 70 SPM @ 15″ STROKE (5) HARDENED STRAIGHTENER ROLLS: 3″ DIAMETER, ADJUSTABLE UPPER STRAIGHTENER ROLLS, MANUAL (CRANK) ADJUSTMENT TO FEE
                                          1977 - COILMATIC AIR FEED WITH PULL THRU STRAIGHTENER - 24" X .090"
                                          $RFQ
                                          1977 - COILMATIC AIR FEED WITH PULL THRU STRAIGHTENER - 24" X .090"
                                          SPECIFICATIONS CAPACITY: 24″ X .090″ FEED STROKE, ADJUSTABLE: 0″ – 15″ FEED RATES: 70 SPM @ 15″ STROKE (5) HARDENED STRAIGHTENER ROLLS: 3″ DIAMETER, ADJUSTABLE UPPER STRAIGHTENER ROLLS, MANUAL (CRANK) ADJUSTMENT TO FEE
                                          1973 - U S BAIRD 1 SPRING GENERATOR - .008" - .034"
                                          $RFQ
                                          1973 - U S BAIRD 1 SPRING GENERATOR - .008" - .034"
                                          SPECIFICATIONS MAXIMUM WIRE DIAMETER: .034″ MINIMUM WIRE DIAMETER: .008″ WIRE FEED LENGTH, RANGE: 6.45″ – 25.78″ WITH OPTIONAL CHANGE GEARS PRODUCTION SPEEDS, PIECES PER HOUR: 600 TO 5000 MOTOR HORSEPOWER: 1/2 HP GENERA
                                          • Wire diameter: 0.034"
                                            1962 - SUNNEN MBB1600 HORIZONTAL HONE - .060" - 6.5"
                                            $RFQ
                                            1962 - SUNNEN MBB1600 HORIZONTAL HONE - .060" - 6.5"
                                            SPECIFICATIONS ID RANGE: 0.060″ TO 6.5″ SPEEDS (12): 200 – 1600 RPM (STEP PULLEY) HONE BORES UP TO 16″ IN LENGTH DEPENDING ON BORE DIAMETER GENERAL DIMENSIONS: 30″ L-R X 60″ F-B X 63″ H WEIGHT, APPROX: 600 LBS ELECTR
                                            • Maximum diameter: 6.5"
                                            • Stroke: 16"
                                              1994 - HANKISON 80400 WATER COOLED AIR DRYER - 400 SCFM
                                              $RFQ
                                              1994 - HANKISON 80400 WATER COOLED AIR DRYER - 400 SCFM
                                              SPECIFICATIONS MINIMUM-MAXIMUM OPERATING CONDITIONS MIN INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): 10 PSIG (.70 BAR) MAX INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): STANDARD: 200 PSIG (14 BAR) OPT
                                              • Cubic feet per minute: 300CFM
                                                1981 - MANURHIN AUTOMATIC 3-39 BARFEED - 1.5" X 12 FT
                                                $RFQ
                                                1981 - MANURHIN AUTOMATIC 3-39 BARFEED - 1.5" X 12 FT
                                                SPECIFICATIONS MAXIMUM BAR LENGTH: 12′ MAXIMUM BAR DIAMETER, APPROX: 1-1/2″ NUMBER OF TUBES: 5 GENERAL HYDRAULIC UNIT DIMENSIONS: 31″ L-R X 18″ F-B X 28″ H BAR FEEDER DIMENSIONS: 16″ L-R X 18′ F-B X 17″ H ELECTRICS: 220
                                                • Maximum bar diameter: 1.5"
                                                • Maximum bar length: 12'
                                                  1988 - HANSVEDT SM150B RAM TYPE EDM - 20 AMPS
                                                  $RFQ
                                                  1988 - HANSVEDT SM150B RAM TYPE EDM - 20 AMPS
                                                  SPECIFICATIONS WORK TABLE SIZE: 9″ X 15″ WORK TANK SIZE: 13″ X 20″ X 9″ DEEP TABLE POSITIONING LONGITUDINAL TRAVEL: 8″ TABLE POSITIONING CROSS TRAVEL: 6″ PLATEN TO TABLE DISTANCE: 16″ MAXIMUM RAM TRAVEL: 6″ RAM PLATEN SI
                                                  • Power: 20A
                                                  • Table width: 15"
                                                    (3) HARDINGE CL-SE EXTENSION TOOLHOLDER - FOR T51 OR T65
                                                    $RFQ
                                                    (3) HARDINGE CL-SE EXTENSION TOOLHOLDER - FOR T51 OR T65
                                                    FITS HARDINGE MODEL T51 OR T65 CNC LATHES
                                                    HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                                                    $RFQ
                                                    HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                                                    SPECIFICATIONS FITS HARDINGE MODEL T51 OR T65 CNC LATHES
                                                    HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                                                    $RFQ
                                                    HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                                                    SPECIFICATIONS FITS HARDINGE MODEL T51 OR T65 CNC LATHES
                                                    MFG UNKNOWN GLASS FRONT/ 2 DOOR CABINET - 36" X 24" X 78"
                                                    $RFQ
                                                    MFG UNKNOWN GLASS FRONT/ 2 DOOR CABINET - 36" X 24" X 78"
                                                    SPECIFICATIONS 4 SHELF GLASS FRONT 2 DOOR CABINET GENERAL DIMENSIONS: 36″ L-R X 24″ F-B X 78″ H WEIGHT, APPROX: 200 LBS
                                                    MARELCO CL000876-14 TRANSFORMER - 50 KVA
                                                    $RFQ
                                                    MARELCO CL000876-14 TRANSFORMER - 50 KVA
                                                    SPECIFICATIONS PRIMARY VOLTS – 200/230/380/415 V DELTA SECONDARY – 230 WYE +/- 5% + 10% TAPS WITH NEUTRAL
                                                    • Power: 50KVA
                                                      HARDINGE 6" 3-JAW CHUCK - 6" 3-JAW
                                                      $RFQ
                                                      HARDINGE 6" 3-JAW CHUCK - 6" 3-JAW
                                                      SPECIFICATIONS DIAMETER: 6″ HOLE: 1.5″
                                                      HARDINGE A SQUARE PRODUCTION TOOLPOST
                                                      $RFQ
                                                      HARDINGE A SQUARE PRODUCTION TOOLPOST
                                                      USED HARDINGE MODEL A SQUARE PRODUCTION TOOLPOST
                                                      MARELCO PTM-9263E TRANSFORMER - 50 KVA
                                                      $RFQ
                                                      MARELCO PTM-9263E TRANSFORMER - 50 KVA
                                                      SPECIFICATIONS PRIMARY: 208 VOLTS SECONDARY: 230 VOLTS KVA RATING: 50
                                                      • Power: 50KVA
                                                        EXSYS/EPPINGER S20 DEAD LENGTH COLLET - 2"
                                                        $RFQ
                                                        EXSYS/EPPINGER S20 DEAD LENGTH COLLET - 2"
                                                        SPECIFICATIONS BAR CAPACITY: 2″ SPINDLE MOUNT: A2-6 USES HARDINGE S20 STYLE COLLET PADS DEAD LENGTH/PUSH TYPE ACTUATION
                                                        MTC E-4436 DIE HANDLER/FLIPPER - 2,500 LBS
                                                        $RFQ
                                                        MTC E-4436 DIE HANDLER/FLIPPER - 2,500 LBS
                                                        SPECIFICATIONS LOAD CAPACITY: 2,500 LBS WORKING AREA UPPER PLATEN: 12″ X 38″ CENTER PLATEN: 26″ X 39-1/2″ PLATEN CLEARANCE 0 DEGREES MAXIMUM: 27″ 0 DEGREES MINIMUM: 9″ 180 DEGREES MAXIMUM: 21-1/4″ 180 DEGREES MINIMUM:
                                                        1994 - HARDINGE EC-12-0750 HYDRODYNAMIC BARFEED - 3/4" X 12'
                                                        $RFQ
                                                        1994 - HARDINGE EC-12-0750 HYDRODYNAMIC BARFEED - 3/4" X 12'
                                                        SPECIFICATIONS MAX. CAPACITY: 3/4″ X 12′ FEATURES ROTATING MULTI TUBE DESIGN WITH 4 TUBES
                                                        • Maximum bar diameter: 0.75"
                                                        • Maximum bar length: 12'
                                                          USED WALKER TURNER 20" SINGLE SPINDLE DRILL - 20"
                                                          $RFQ
                                                          USED WALKER TURNER 20" SINGLE SPINDLE DRILL - 20"
                                                          SPECIFICATIONS CAPACITY: 20″ NUMBER OF SPEEDS: 15 SPEED RANGE: 260 – 5200 RPM SPINDLE TRAVEL: 6-1/2″ SPINDLE TAPER: #3 MT GENERAL DIMENSIONS, APPROX.: 2′ L-R X 3′ F-B X 4′ H WEIGHT, APPROX.: 250 LBS ELECTRICS: 220 VOLTS
                                                          • Swing: 20"
                                                          • Motor: 0.5HP
                                                            1982 - BROWN & SHARPE MICROMASTER 612 HAND FEED SURFACE GRINDER - 6" X 12"
                                                            $RFQ
                                                            1982 - BROWN & SHARPE MICROMASTER 612 HAND FEED SURFACE GRINDER - 6" X 12"
                                                            SPECIFICATIONS GRINDING CAPACITY: 6” W X 12” L HEIGHT OF WORK GROUND WITH WHEEL – 8” OD X 1-1/4” HOLE: 12” DISTANCE – CENTER OF WHEEL SPINDLE TO TOP OF TABLE: 16” MAX – 3.5” MIN SPINDLE ANTI-FRICTION BEARING UNIT WITH OR
                                                            • Table width: 6"
                                                            • Table length: 12"
                                                              1980 - BROWN & SHARPE MICROMASTER 612 HAND FEED GRINDER - 6" X 12"
                                                              $RFQ
                                                              1980 - BROWN & SHARPE MICROMASTER 612 HAND FEED GRINDER - 6" X 12"
                                                              SPECIFICATIONS GRINDING CAPACITY: 6” W X 12” L HEIGHT OF WORK GROUND WITH WHEEL – 8” OD X 1-1/4” HOLE: 12” DISTANCE – CENTER OF WHEEL SPINDLE TO TOP OF TABLE: 16” MAX – 3.5” MIN SPINDLE ANTI-FRICTION BEARING UNIT WITH OR
                                                              • Table width: 6"
                                                              • Table length: 12"
                                                                POWERHOLD 8.25 LH3A6FS CHUCK, 8-1/4" 3-JAW
                                                                $RFQ
                                                                POWERHOLD 8.25 LH3A6FS CHUCK, 8-1/4" 3-JAW
                                                                WILL FIT HARDINGE CONQUEST T51 AND CONQUEST T42 “BIG BORE” LATHES SPECIFICATIONS DIAMETER: 8-1/4″ MOUNTING FOR HARDINGE CNC LATHE: A2-6″ THROUGH HOLE: 2″
                                                                MARELCO M10523FE ELECTRIC TRANSFORMER - 35 KVA
                                                                $RFQ
                                                                MARELCO M10523FE ELECTRIC TRANSFORMER - 35 KVA
                                                                SPECIFICATIONS 35 KVA PRIMARY VOLTAGES: 200, 230, 415, 460 475 VOLTS SECONDARY VOLTAGE: 230 VOLTS
                                                                • Power: 35KVA
                                                                  MYFORD 20/133/1 INTERNAL GRINDING ATTACHMENT- FOR SERIES M
                                                                  $RFQ
                                                                  MYFORD 20/133/1 INTERNAL GRINDING ATTACHMENT- FOR SERIES M
                                                                  FOR MYFORD SERIES M CYLINDRICAL GRINDERS COMPRISING PIVOTED BRACKET, BORED TO TAKE CARTRIDGE TYPE INTERNAL SPINDLE UNITS, AND COMPLETE WITH 3/4 HP / 3PH MOTOR WITH DRIVING PULLEY, BELT GUARD, ETC. AN OUTLET SOCKET IS PRO
                                                                  1975 - SUNNEN MBB1800J POWER STROKE HONE - .060" - 6.5"
                                                                  $RFQ
                                                                  1975 - SUNNEN MBB1800J POWER STROKE HONE - .060" - 6.5"
                                                                  SPECIFICATIONS I.D. RANGE: .060″ – 6.5″ LENGTH RANGE: BORES UP TO 16″ IN LENGTH, DEPENDING ON BORE DIA STROKING RATES: 80, 110, 160, 220, 310 SPM SPINDLE SPEEDS: 200, 250, 320, 400, 500, 640, 800, 1000, 1270, 1600, 2000,
                                                                  • Maximum diameter: 6.5"
                                                                  • Stroke: 16"
                                                                    USED HAGER CARBIDE GRINDER - 6"
                                                                    $RFQ
                                                                    USED HAGER CARBIDE GRINDER - 6"
                                                                    DOUBLE END DIAMOND WHEEL FOR FORM TOOLS WITH SLIDING UNIVERSAL WORK HOLDING FIXTURE SPECIFICATIONS DIAMOND GRINDING WHEELS: 6″ OD X 1-1/8″ BORE X 3/4″–1″ WIDTH TWO GRINDING FACES PER WHEEL: 1/16″ X 1/4″ GENERAL MACHINE
                                                                    2000 - KANETSU E2C-1020C ELECTRO-MAGNETIC CHUCK - 10" X 20"
                                                                    $RFQ
                                                                    2000 - KANETSU E2C-1020C ELECTRO-MAGNETIC CHUCK - 10" X 20"
                                                                    SPECIFICATIONS SIZE: 10″ X 20″ GENERAL DIMENSIONS (APPROX.): 20″ L-R X 10″ F-B X 5″ H WEIGHT (APPROX.): 125 LBS ELECTRICS: 110V, 1 PH, 60 CYC DC VOLTS EQUIPPED WITH (2) HOLDDOWNS NOTE: NO CONTROL & NO WARRANTY
                                                                    1975 - CINCINNATI 207MK VERT MILL - 12" X 53"
                                                                    $RFQ
                                                                    1975 - CINCINNATI 207MK VERT MILL - 12" X 53"
                                                                    SPECIFICATIONS TABLE WORKING SURFACE: 53.5″ X 11.8″ SIZE OVERALL: 53.5″ X 11.8″ RANGE LONGITUDINAL: 28″ CROSS: 13.7″ VERTICAL: 18.7″ QUILL: 3.9″ DISTANCES SPINDLE FACE TO TABLE TOP: 20.7″ MAXIMUM 0″ MINIMUM SPINDLE S
                                                                    • Table width: 12"
                                                                    • Table length: 53"
                                                                      KYSOR JOHNSON V-36 VERT BANDSAW - 36"
                                                                      $RFQ
                                                                      KYSOR JOHNSON V-36 VERT BANDSAW - 36"
                                                                      SPECIFICATIONS CAPACITY THROAT SIZE: 36″ MAX. WORK HEIGHT: 12″ BLADE WIDTH: 1/16″ – 1″ BLADE LENGTH: 133″ – 140″ (2 WHEELS) 181″ – 185″ (3 WHEELS) INSERT BLADE GUIDE CAPACITY: 1″ BLADE SPEED RANGE, INF. VARIABLE: 50 TO
                                                                      • Throat capacity: 36"
                                                                      • Height capacity: 12"
                                                                        1975 - SUNNEN MBB1800E POWER STROKE HONE - .060" - 6.5"
                                                                        $5,950
                                                                        1975 - SUNNEN MBB1800E POWER STROKE HONE - .060" - 6.5"
                                                                        SPECIFICATIONS I.D. RANGE: .060″ – 6.5″ LENGTH RANGE: BORES UP TO 16″ IN LENGTH, DEPENDING ON BORE DIA STROKING RATES: 80, 110, 160, 220, 310 SPM SPINDLE SPEEDS: 200, 250, 320, 400, 500, 640, 800, 1000, 1270, 1600, 2000,
                                                                        • Maximum diameter: 6.5"
                                                                        • Stroke: 16"
                                                                          1974 - K O LEE S714 HAND FEED SURFACE GRINDER - 6" X 12"
                                                                          $RFQ
                                                                          1974 - K O LEE S714 HAND FEED SURFACE GRINDER - 6" X 12"
                                                                          SPECIFICATIONS TABLE WORKING SURFACE: 13-1/2″ X 6″ T-SLOT WIDTH: 7/16″ TABLE TRAVEL LONGITUDINAL: 14″ CROSS FEED: 7-1/4″ WORK HEIGHT DISTANCE TOP SURFACE OF TABLE TO CENTERLINE OF SPINDLE: 3-1/8″ MINIMUM 16″ MAXIMUM HA
                                                                          • Table width: 6"
                                                                          • Table length: 12"
                                                                            1981 - KENT KGS-200 HAND FEED SURFACE GRINDER - 6" X 12"
                                                                            $RFQ
                                                                            1981 - KENT KGS-200 HAND FEED SURFACE GRINDER - 6" X 12"
                                                                            SPECIFICATIONS CAPACITY TABLE WORKING SURFACE: 16″ X 6-1/4″ LONGITUDINAL TABLE TRAVEL: 17″ CROSSFEED TABLE TRAVEL: 8″ MAXIMUM DISTANCE CENTER OF SPINDLE TO TABLE: 18″ TABLE LOAD (INCLUDING MAGNETIC CHUCK): 220 LBS TABL
                                                                            • Table width: 6"
                                                                            • Table length: 12"
                                                                              1980 - TONGIL TGU27 UNIVERSAL CYLINDRICAL GRINDER - 10.6" X 20"
                                                                              $RFQ
                                                                              1980 - TONGIL TGU27 UNIVERSAL CYLINDRICAL GRINDER - 10.6" X 20"
                                                                              SPECIFICATIONS TABLE SIZE 10.6″ X 20″ WORKHEAD SWIVEL OF WORKHEAD: 360 DEGREES (120 DEGREES GAUGED) SWING OVER TABLE: 10.6″ GRINDING LENGTH BETWEEN CENTERS: 20″ DIAMETER GROUND WITH NEW WHEEL (MAX): 6″ WORKPIECE WEIGHT(
                                                                              • Swing: 10.6"
                                                                              • Centers: 20"
                                                                                1973 - SUNNEN MBB1800D/E POWER STROKE HONE - .060" - 6.5"
                                                                                $RFQ
                                                                                1973 - SUNNEN MBB1800D/E POWER STROKE HONE - .060" - 6.5"
                                                                                SPECIFICATIONS I.D. RANGE: .060″ – 6.5″ LENGTH RANGE: BORES UP TO 16″ IN LENGTH, DEPENDING ON BORE DIA. STROKING RATES: 80, 110, 160, 220, 310 SPM SPINDLE SPEEDS: 200, 250, 320, 400, 500, 640, 800, 1000, 1270, 1600, 2000
                                                                                • Maximum diameter: 6.5"
                                                                                • Stroke: 16"
                                                                                  NEW - BUCK C-21046 FLATBACK CHUCK - 10" 3-JAW
                                                                                  $RFQ
                                                                                  NEW - BUCK C-21046 FLATBACK CHUCK - 10" 3-JAW
                                                                                  SPECIFICATIONS 10″ 3-JAW FLATBACK HARDENED & REVERSIBLE TOP JAWS
                                                                                  O S WALKER FINE POLE ELECTROMAGNETIC CHUCK - 6" X 18"
                                                                                  $RFQ
                                                                                  O S WALKER FINE POLE ELECTROMAGNETIC CHUCK - 6" X 18"
                                                                                  SPECIFICATIONS SIZE: 6″ X 18″
                                                                                  EX-CELL-O MAGNA COMPOUND SINE MAG CHUCK - 6" X 10"
                                                                                  $RFQ
                                                                                  EX-CELL-O MAGNA COMPOUND SINE MAG CHUCK - 6" X 10"
                                                                                  SPECIFICATIONS SIZE: 6″ X 10″
                                                                                  EX-CELL-O COMPOUND ANGLE ELECTROMAGNETIC SINE - 6" X 10"
                                                                                  $RFQ
                                                                                  EX-CELL-O COMPOUND ANGLE ELECTROMAGNETIC SINE - 6" X 10"
                                                                                  SPECIFICATIONS SIZE: 6″ X 10″
                                                                                  MAGNALOCK DA-10 COMPOUND SINE MAGNETIC CHUCK - 6" X 12"
                                                                                  $RFQ
                                                                                  MAGNALOCK DA-10 COMPOUND SINE MAGNETIC CHUCK - 6" X 12"
                                                                                  EQUIPPED WITH VARIABLE NEUTRIFIER CONTROL
                                                                                  1969 - LATHE CHUCK - 9" CHUCK
                                                                                  $RFQ
                                                                                  1969 - LATHE CHUCK - 9" CHUCK
                                                                                  SPECIFICATIONS L2 SPINDLE NOSE DIAMETER: 9″ HOLE: 3-1/4″
                                                                                  E J POWER 8" 3-JAW CHUCK - 8" 3-JAW
                                                                                  $RFQ
                                                                                  E J POWER 8" 3-JAW CHUCK - 8" 3-JAW
                                                                                  SPECIFICATIONS 3-JAW POWER CHUCK: 8″ DIAMETER TONGUE & GROOVE MASTER JAWS MOUNTING PLATE: A26 NO TOP JAWS 2″ THROUGH HOLE
                                                                                  1" Waterbury Model 150 Slug Header
                                                                                  $RFQ
                                                                                  1" Waterbury Model 150 Slug Header
                                                                                  No description providedMaximum Cutoff Diameter1" Tonnage Rating150 Slugs Per Minute180 Maximum Kickout3" Maximum Feed3" Approx. Weight28,100 lbs Approx. Floor Space77" x 134" Horsepower100
                                                                                  5/16" Lewis 2SV 32SV-DA Wire Straighten And Cut Machine
                                                                                  $RFQ
                                                                                  5/16" Lewis 2SV 32SV-DA Wire Straighten And Cut Machine
                                                                                  No description providedWire Diameter Range.062" - .312" Speed Range60 - 275 FPM Maximum Length15' Two Counter Rotating Straightener<br />Arbor Assemblies<br /
                                                                                  #10 Waterbury Heavy Frame Automated Flat Die Thread Roller
                                                                                  $RFQ
                                                                                  #10 Waterbury Heavy Frame Automated Flat Die Thread Roller
                                                                                  No description providedMaximum Thread Diameter1/4" Maximum Thread Length2" Maximum Production150 PPM Approx. Weight3,700 lbs Approx. Floor Size45" W x 72" L Vibratory
                                                                                  • Maximum workpiece diameter: 0.25"
                                                                                  • Maximum workpiece diameter: 0.25"
                                                                                  • Maximum thread length: 2"
                                                                                    Complete bagging system for sale
                                                                                    $40,000
                                                                                    Complete bagging system for sale
                                                                                    This system has a Flexicon bulk bag unloading frame with a 2 ton electric hoist, a knife bag piercing station and a air vibrating hopper to prevent clogging. A ECC power auger fed, open mouth bagging machine with air ope
                                                                                    #20 Hartford/Tanisaka 20-225 Automated Flat Die Thread Roller
                                                                                    $RFQ
                                                                                    #20 Hartford/Tanisaka 20-225 Automated Flat Die Thread Roller
                                                                                    No description providedScrew Diameter Capacity1/4" thru 1/2" Maximum Thread Lengthto 3" Thread Length at Max. Diameter1-1/2" Maximum Shank Length4" Production Rate135 - 225 PPM Die Pocket Depth3-1/8" Flat Die SizeStandar
                                                                                    • Maximum workpiece diameter: 0.5"
                                                                                    • Maximum thread length: 3"
                                                                                      1/4" Waterbury 256 Parts Former
                                                                                      $RFQ
                                                                                      1/4" Waterbury 256 Parts Former
                                                                                      No description providedDiameter1/4" Max. Wire Diameter Stainless9/32" Maximum Feed Length1" Max. Blanks Per Minute200 Maximum Die Knockout1-1/4" PKO Stroke5/8" Tonnage25 Tons
                                                                                      1/4" Waterbury Farrel Model 256 5 Die Nut Former
                                                                                      $RFQ
                                                                                      1/4" Waterbury Farrel Model 256 5 Die Nut Former
                                                                                      No description providedMaximum Nut Size1/4" (American Std Finished) Maximum Production250 PPM Maximum Cutoff Capacity11/32" Maximum Die Knockout7/16" Maximum Across Flats3/8" Approx. Weight9,000 lbs Approx. Floor Size60"
                                                                                      1/16" Nilson Oscilating Arbor Straightener
                                                                                      $RFQ
                                                                                      1/16" Nilson Oscilating Arbor Straightener
                                                                                      No description providedMaximum Wire Diameter1/16" (.062") <strong>Check out our full inventory&nbsp;<span style="color: #e74c3c;"><a style="color: #
                                                                                      Bundgens UDR Wire Straightening & Hot Parting Machine
                                                                                      $RFQ
                                                                                      Bundgens UDR Wire Straightening & Hot Parting Machine
                                                                                      No description providedDiameter0.3mm - 2.0mm range Stroke Length5mm - 72mm Production400 PPM Maximum Speed30.5 Meters per Minute (100 FPM) Machine Has Less Then 50 Hou
                                                                                      1/2" Shuster ASF Wire Straighten And Cut Machine
                                                                                      $RFQ
                                                                                      1/2" Shuster ASF Wire Straighten And Cut Machine
                                                                                      No description providedWire Diameter Range1/4" - 9/16" Mild Steel Maximum Cutoff Length10" Motor7.5 HP Electrics480V With Two Plane Straightener<br />Spare Tooli
                                                                                      Fastener Engineers PF-2400-24 Pay-Off Reel
                                                                                      $RFQ
                                                                                      Fastener Engineers PF-2400-24 Pay-Off Reel
                                                                                      No description providedMandrel Diameter24" Mandrel Length48" Maximum Coil Weight2,400 lbs Maximum Speed300 FPM Minimum Rod Size.875" 7/8" Rod Diameter@60,000 PSI 3/4" Rod Diameter@100,00 PSI 5/8" Rod Diameter@125,000 PSI
                                                                                      Payoff High Speed
                                                                                      $RFQ
                                                                                      Payoff High Speed
                                                                                      No description providedMax. Spool Diameter30" Distance Between Flanges@22" Motor10kW Spool Set UpDouble Pintle Bore5" Maximum Speed20 Meters/Second Maximum Spool Weight2,000 kg
                                                                                      Categories:
                                                                                      Condition:
                                                                                      Manufacturer:
                                                                                      Location:
                                                                                      Price:
                                                                                      •  to 
                                                                                      <Prev | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | Next>