buy & sell, new & used machinery, machine tools & equipment

<Prev | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | Next>
Refine: Viewing 2501 - 2600 of 20769 matches
Sort by:
Items Per Page:  20 |  50 |  100
Snag Detector Heavy Duty
$RFQ
Snag Detector Heavy Duty
With Extra Ring
Walker Turner Vertical 14" Model 32 Band Saw
$RFQ
Walker Turner Vertical 14" Model 32 Band Saw
No description providedCapacity14" Blade to Frame Capacity7" Guide to Table Electrics220 Volt, 3 Phase Approx. Weight450 lbs. Approx. Floor Size26" W x 20" L x 70" H
XY Tool Bar Shear
$RFQ
XY Tool Bar Shear
No description providedCapacity3/4" to 1.75" Cutting Force130 Tons Shear Length12" to 36" Maximum Bar Length43' (3-15' Bar Feeds) Hydraulic Unit Motor100 Horsepower Auto CycleYes
Bridgeport/Harig 618 EZ Surf Surface Grinder
$RFQ
Bridgeport/Harig 618 EZ Surf Surface Grinder
No description providedMaximum Grinding Capacity6" x 18" Maximum Longitudinal Table Travel20" Maximum Cross Feed Travel6.75" Distance from Spindle Center to Table12" Variable Table Speed1/4" to 30 FPM Approx. Weight2,750
Schenker KA-1B Staple Machine
$RFQ
Schenker KA-1B Staple Machine
No description providedWire Diameter1 Wire .016" - .032" Wire Diameter2 Wires .016" - .024" Maximum Wire LengthUp to 1.6" Leg LengthUp to .60" Shoulder WidthUp to .60" Wire Feeds2 Output Per MinuteUp to 1100 Pieces Lengt
1/4" Warren WT-1000 High Speed Automated Flat Die Thread Roller
$RFQ
1/4" Warren WT-1000 High Speed Automated Flat Die Thread Roller
No description providedDie Requirement"0" or "00" Screw Diameter Capacity#2 to #12 (1/4") Speed Range90 to 1000 PPM Maximum Blank LengthUp to 3" Die Pocket Depth3" Approx. Weight4500 lbs Approx. Floor Size56" x 52" x 68"
1/2" Videx Model VC-20-MH Wire Straighten & Cutoff Machine
$RFQ
1/2" Videx Model VC-20-MH Wire Straighten & Cutoff Machine
No description providedWire Diameter Range.20" - .50" (5.2 - 13mm) Cutoff Length Range.375" - 12' Maximum Production300 FPM Electrics480V
1-5/16" National 1250 Cold Former
$RFQ
1-5/16" National 1250 Cold Former
No description providedProduction55 - 65 PPM Maximum Cutoff Diameter33.5mm (1-5/16") Maximum Die Kickout225mm (9") With Boltmaker Transfer, Arranged For TKO, Includes
Nilson S-3 Fourslide
$RFQ
Nilson S-3 Fourslide
No description providedStandard Feed Length15" Strokes Per Minute32 - 130 Motor3 HP Approx. Floor Size79" L x 62" W Wire Diameter3/16" Maximum Strip Width1-5/8" With 2
5/16" Lewis 2CV Short Cut Machine
$RFQ
5/16" Lewis 2CV Short Cut Machine
No description providedWire Diameter Range1/16" - 5/16" Maximum Length6" Max. Minimum Length1/2" Maximum Production615 @1/2" - 1-1/2" Maximum Production410 - up to 3" Maximum Production205 - up to 6" Speed Range65 to 200
Sacma Model SP-660-AL 5 Die Cold Former
$RFQ
Sacma Model SP-660-AL 5 Die Cold Former
No description providedHeading Load4500 KN Number of Dies5 Maximum Cutoff Diameter27mm Maximum Cutoff Length300mm Die Kickout Range40-240mm Maximum Production90 PPM Punch Knockout Stroke64mm Max. Approx. Weight85,000 KG
42" Turntable
$RFQ
42" Turntable
<strong>Check out our full inventory&nbsp;<span style="color: #e74c3c;"><a style="color: #e74c3c;" href="https://www.fhmachinery.com">www.fhmachinery.com</a></span></strong>
34" Turntable
$RFQ
34" Turntable
Size:&nbsp; 34"&nbsp;<br /><br />&nbsp;<strong>Check out our full inventory&nbsp;<span style="color: #e74c3c;"><a style="color: #e74c3c;" href="https://www.fhmachinery.com">w
Wire Decoiler
$RFQ
Wire Decoiler
No description providedTop Plate Diameter42"
Pneumatic Wire Bender
$RFQ
Pneumatic Wire Bender
No description providedRotating Disc12" Diameter Table Size21" x 95" Foot Pedal
RMG Double End Saddle Rod Flipper CC 6500
$RFQ
RMG Double End Saddle Rod Flipper CC 6500
No description providedArm Length96" Base Dimensions8' x 8' Wire Diameter Range.218" - .625" Coil Width60" Coil weight is not a limiting factor. Flipper is designed to
Grob Vertical Band Saw Model Model 4V-24
$RFQ
Grob Vertical Band Saw Model Model 4V-24
No description providedThroat Depth24" Work Height12" Saw Blades1/8" - 1" Wide Approx. Weight1670 lbs
Yuasa CNC tilting rotary table, 4th axis, 5th axis, Fagor
$3,000
Yuasa CNC tilting rotary table, 4th axis, 5th axis, Fagor
Here is a Yuasa 4th and 5th axis CNC tilting rotary table. It has a standard Hardinge 2 3/16"-10 spindle and holds 5C collets also. The tilting axis has a 160mm dia plate. The motors are Fagor FXM AC servos.
AIR FLOW SYSTEMS AIR FILTER
$2,450
AIR FLOW SYSTEMS AIR FILTER
AIR FLOW SYSTEMS AIR FILTER PRICE: Loaded on Truck, Our Warehouse, York, PA …… $2,450.00 HMC Stock # 20063-P Machine Serial No.: 105114 Machine Model No.: T140-STD-PG3-EB-SP New Date: Jan. 2015 This unit is designe
TRINCO DRY BLAST CABINET
$2,950
TRINCO DRY BLAST CABINET
TRINCO DRY BLAST CABINET PRICE: Loaded on Truck, Our Warehouse, York, PA …… $2,950.00 HMC Stock # 20040-P Machine Serial No.: 18662-1 Machine Model No.: 60X48 New Date: Unknown Dual Station (1) Set of Work Gloves -
1997 STAR SR-20 SWISS STYLE CNC LATHE, FANUC 16T, 20MM BAR, BARFEED
$RFQ
1997 STAR SR-20 SWISS STYLE CNC LATHE, FANUC 16T, 20MM BAR, BARFEED
SPECIFICATIONS MAXIMUM MACHINING DIAMETER: 20 MM (3/4") MAIN SPINDLE BORE: 15/16” MAXIMUM HEADSTOCK STROKE: 8” MAXIMUM DRILLING CAPABILITY (STATIONARY): 5/16" MAXIMUM DRILLING CAPABILITY (POWER-DRIVEN) 3/
  • Spindle hole diameter: 0.787"
    2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
    $RFQ
    2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
    TRAVELS X-AXIS: 27.55" Y-AXIS: 15.74" Z-AXIS: 12.99" TABLE TABLE SIZE: 33.46" X 16.4" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: BT-30 SPINDLE NOSE TO
    • X axis: 27.5"
    • Y axis: 15.7"
      2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
      $RFQ
      2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
      TRAVELS X-AXIS: 27.55" Y-AXIS: 15.74" Z-AXIS: 12.99" TABLE TABLE SIZE: 33.46" X 16.4" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: BT-30 SPINDLE NOSE TO
      • X axis: 27.5"
      • Y axis: 15.7"
        AVEREX (AKARI) HS-450i HORIZONTAL MACHINING CENTER, FANUC CONTROL
        $RFQ
        AVEREX (AKARI) HS-450i HORIZONTAL MACHINING CENTER, FANUC CONTROL
        4,574 POWER ON HOURS 929 RUN HOURS 277 CUTTING HOURS MANUFACTURED IN 2015 | INSTALLED IN 2018 SPECIFICATIONS TRAVELS X-AXIS: 25.2” Y-AXIS: 24” Z-AXIS: 26.8” SPINDLE CENTER TO PALLET TOP: 2” – 26” SPINDL
        • X axis: 25.2"
        • Y axis: 24"
          2002 HAAS MODEL SL-30T CNC LATHE WITH HAAS CONTROL, 10" CHUCK
          $RFQ
          2002 HAAS MODEL SL-30T CNC LATHE WITH HAAS CONTROL, 10" CHUCK
          SWING DIAMETER OVER FRONT APRON: 30" OVER CROSS SLIDE: 14.5" CAPACITIES CHUCK SIZE: 10" STANDARD BAR CAPACITY: 2.5" MAXIMUM CUTTING DIAMETER: 14.5" MAXIMUM CUTTING LENGTH: 34" SP
          • Swing: 30"
          • Centers: 34"
            K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
            $1,500
            K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
            THIS PRECISION WORKHOLDING FIXTURE PROVIDES FAST, ACCURATE SHARPENING OF END MILLS AND MILLING CUTTERS. THE AIR-SUSPENDED, MOVABLE SPINDLE PRINCIPLE FOR GRINDING SMALLER CUTTERS AVOIDS THE PROBLEMS OF INSENSITIVE TABLE
            K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
            $RFQ
            K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
            THIS PRECISION WORKHOLDING FIXTURE PROVIDES FAST, ACCURATE SHARPENING OF END MILLS AND MILLING CUTTERS. THE AIR-SUSPENDED, MOVABLE SPINDLE PRINCIPLE FOR GRINDING SMALLER CUTTERS AVOIDS THE PROBLEMS OF INSENSITIVE TABLE
            2) USED FLOW MACH 2 1313B CNC WATERJETS WITH FLOW 20XW 100 HP PUMP, 4’ X 4’
            $RFQ
            2) USED FLOW MACH 2 1313B CNC WATERJETS WITH FLOW 20XW 100 HP PUMP, 4’ X 4’
            SPECIFICATIONS CUTTING AREA: 4’ X 4’ ACCURACY: + 005 PER 3’ RAPID TRAVERSE: 400 IPM FLOW 20XW ULTRA HIGH PRESSURE DUAL INTENSIFIER PUMP • 100 HP MOTOR • 60,000 PSI • POWERS MULTIPLE NOZZLES • SOUND ABATEMENT
            KITAMURA MYCENTER-4XD#50 VMC, BOX WAYS & 4TH AXIS ROTARY TABLE, 43.3” X
            $RFQ
            KITAMURA MYCENTER-4XD#50 VMC, BOX WAYS & 4TH AXIS ROTARY TABLE, 43.3” X
            TRAVELS X-AXIS: 43.3” Y-AXIS: 24” Z-AXIS: 24” SPINDLE TAPER: #50 SPEED: 10,000 RPM MOTOR (30 MIN): 35 HP MOTOR (CONTINUOUS): 30 HP SPINDLE TORQUE (30 MIN): 488.3FT/LBS TABLE SIZE: 25.2” X 50” MAXIMUM WO
            • X axis: 43.3"
            • Y axis: 24"
              K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
              $1,250
              K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
              THIS PRECISION WORKHOLDING FIXTURE PROVIDES FAST, ACCURATE SHARPENING OF END MILLS AND MILLING CUTTERS. THE AIR-SUSPENDED, MOVABLE SPINDLE PRINCIPLE FOR GRINDING SMALLER CUTTERS AVOIDS THE PROBLEMS OF INSENSITIVE TABLE
              • Maximum workpiece diameter: 1"
                TORIT MODEL 64 DUST COLLECTOR, 400 CFM
                $350
                TORIT MODEL 64 DUST COLLECTOR, 400 CFM
                TYPE: CABINET/FILTER STYLE CFM: 400 CFM INPUT HOSE: 4” MOTOR: 3/4 HP DIMENSIONS: 22" LR X 24" FB X 33" H
                • Motor: 0.75HP
                  ROCKWELL DELTA MODEL 15-655 TABLE DRILL, 15"
                  $450
                  ROCKWELL DELTA MODEL 15-655 TABLE DRILL, 15"
                  SPECIFICATIONS 5 STEP PULLEY: 425-5500 JACOBS CHUCK: 1/2" TABLE: 11" X 14" QUILL TRAVEL: 5" GENERAL ELECTRICS: 115 VOLTS DIMENSIONS: 19” X 42” X 42” EQUIPPED WITH DRILL CHUCK C
                  • Swing: 15"
                    ROCKWELL DELTA MODEL 15-655 TABLE DRILL, 15"
                    $450
                    ROCKWELL DELTA MODEL 15-655 TABLE DRILL, 15"
                    SPECIFICATIONS 5 STEP PULLEY: 425-5500 JACOBS CHUCK: 1/2" TABLE: 11" X 14" QUILL TRAVEL: 5" GENERAL ELECTRICS: 115 VOLTS DIMENSIONS: 19” X 42” X 42” EQUIPPED WITH DRILL CHUCK C
                    • Swing: 15"
                      BLACK DIAMOND MODEL DD2 BENCH TYPE DRILL GRINDER, 1/8” – 1-1/2”
                      $RFQ
                      BLACK DIAMOND MODEL DD2 BENCH TYPE DRILL GRINDER, 1/8” – 1-1/2”
                      SPECIFICATIONS DRILL SIZES: 1/8” TO 1-1/2” CUP WHEEL: 6” X 1-1/4” X 1-1/8” GRINDING WHEEL: 6” X 7/8” X 1-1/8” DRILL POINT ANGLE: 59° (ADJUSTABLE FROM 40° TO 70°) CLEARANCE (VARIABLE): 5° TO 16&#
                      • Maximum drill capacity: 1.5"
                        1981 K O LEE MODEL B2000 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"
                        $RFQ
                        1981 K O LEE MODEL B2000 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"
                        SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 32" DISTANCE BETWEEN WORK HEAD & TAILSTOCK CENTERS: 26" DISTANCE BETWEEN WORK HEAD COLLET AND TAILSTOCK: 27" DISTANCE BETWEEN CHUCK FACE AND TAILSTOC
                        1990 OPTIMA OPTICAL DRILL GRINDER, 1"
                        $RFQ
                        1990 OPTIMA OPTICAL DRILL GRINDER, 1"
                        ONLY THE OPTIMA HAS A RANGE FROM .0135" TO 1.000" DIA. IT WILL GRIND RIGHT AND LEFT HAND DRILLS, HIGH SPEED STEEL AND CARBIDE TIPPED OR SOLID CARBIDE DRILLS, SPADE DRILLS, COUNTERSINKS, CENTER DRILLS OF ALL TY
                        • Maximum drill capacity: 1"
                          1976 CINCINNATI #2 MODEL DO TOOL & CUTTER GRINDER, 5-1/4” X 37”
                          $RFQ
                          1976 CINCINNATI #2 MODEL DO TOOL & CUTTER GRINDER, 5-1/4” X 37”
                          CAPACITY SWING OVER TABLE: 10-1/2" LENGTH, BETWEEN TAILSTOCKS: 33" LENGTH, BETWEEN TAILSTOCK & WORKHEAD: 28" FACE MILLS ON WORKHEAD (MAX DIAMETER): 10" SAWS ON TABLE (DIAMETER 48" FORME
                          • Maximum workpiece diameter: 10"
                            2016 OKUMA MB-5000H HORIZONTAL MACHINING CENTER, 19.7" Pallets
                            $209,500
                            2016 OKUMA MB-5000H HORIZONTAL MACHINING CENTER, 19.7" Pallets
                            11,964 POWER ON HOURS 3,325 OPERATING HOURS 2,204 CUTTING HOURS SPECIFICATIONS TRAVELS X-AXIS: 29.92” Y-AXIS: 29.92” Z-AXIS: 29.92” SPINDLE CENTER TO PALLET TOP: 1.97” – 31.89” SPINDLE NOSE TO PALLET CE
                            • X axis: 29.92"
                            • Y axis: 29.82"
                              2014 HAAS MODEL ST-10 CNC LATHE WITH HAAS CONTROL, 6” CHUCK
                              $RFQ
                              2014 HAAS MODEL ST-10 CNC LATHE WITH HAAS CONTROL, 6” CHUCK
                              SWING DIAMETER MAXIMUM PART DIAMETER: 16.5” OVER WEDGE: 16.5” CAPACITIES CHUCK SIZE: 6” MAXIMUM CUTTING DIAMETER: 14” MAXIMUM CUTTING LENGTH: 16” BAR CAPACITY: 1.75” TRAVELS X-AXIS: 7.9” Z-AXIS: 16” FEED
                              PANNIER BENCH TOP FIBER LASER ENGRAVING SYSTEM, ARENA ENCLOSURE,33 WATT
                              $15,000
                              PANNIER BENCH TOP FIBER LASER ENGRAVING SYSTEM, ARENA ENCLOSURE,33 WATT
                              LASER YTTERBIUM FIBER: 33 WATT Q-SWITCH, 1050 – 1090 MM WAVELENGTH TYPE: LASER CLASS 4 FACILITIES REQUIREMENTS POWER SUPPLY: 110/240 VOLTS – 50/60 HZ FIBER LENGTH: 6.5’ COOLING: AIR COOLED OPERATING ENVIRONMENT:
                              CINCINNATI 520-16 PLAIN TYPE HORZ MILL, VERT MILLING ATTACHMENT, 16" x
                              $RFQ
                              CINCINNATI 520-16 PLAIN TYPE HORZ MILL, VERT MILLING ATTACHMENT, 16" x
                              TABLE WORKING SURFACE: 16-1/4” X 87-3/4” T-SLOTS (3): 13/16” DISTANCE BETWEEN T-SLOTS: 3-1/4” RANGE LONGITUDINAL: 50" VERTICAL: 16" CROSS: 20" CENTERLINE SPINDLE TO TOP OF TABLE: 0 – 20” SPIND
                              • Table width: 16"
                              • Table length: 88"
                                MORI SEIKI NLX-1500Y/500 CNC LATHE WITH LIVE TOOLING, Y-AXIS, 6" CHUCK
                                $RFQ
                                MORI SEIKI NLX-1500Y/500 CNC LATHE WITH LIVE TOOLING, Y-AXIS, 6" CHUCK
                                CAPACITY SWING OVER BED: 36.37 SWING OVER CROSS SLIDE: 29.72 MAXIMUM TURNING DIAMETER: 15.19” STANDARD TURNING DIAMETER: 10.24” TURNING LENGTH: 20.28" BAR WORK CAPACITY: 2.05" TRAVELS X-AXIS TRAVEL:
                                • Swing: 36.37"
                                • Centers: 20.28"
                                  FARO EDGE PORTABLE COORDINATE MEASURING MACHINE ARM, 7-AXIS, 9’ RANGE
                                  $RFQ
                                  FARO EDGE PORTABLE COORDINATE MEASURING MACHINE ARM, 7-AXIS, 9’ RANGE
                                  LASER LINE PROBE SPECIFICATIONS ACCURACY: +.0014” REPEATABILITY: .0014” STAND-OFF: 3.15” DEPTH OF FIELD: 3.35” EFFECTIVE SCAN WIDTH (NEAR FIELD): 2.09” EFFECTIVE SCAN WIDTH (FAR FIELD): 3.5” POINTS PER LINE: 752
                                  2016 FARO VANTAGE LASER TRACKER PORTABLE COORDINATE MEASURING MACHINE
                                  $RFQ
                                  2016 FARO VANTAGE LASER TRACKER PORTABLE COORDINATE MEASURING MACHINE
                                  SPECIFICATIONS DIMENSIONS HEAD SIZE: 8.8” W X 16.4” H HEAD WEIGHT: 28 LBS CONTROLLER SIZE (WITH FILTERS): 12.4” L X 6.2” D X 8.4” H CONTROLLER SIZE (WITHOUT FILTERS): 11.4” L X 6.2” D X 8.4” H RANGE 262.5’ MAXIMU
                                  • X axis measuring range: 2360"
                                    AMADA MODEL RG-50 UPACTING HYDRAULIC CNC PRESS BRAKE, 82" X 55 TON
                                    $RFQ
                                    AMADA MODEL RG-50 UPACTING HYDRAULIC CNC PRESS BRAKE, 82" X 55 TON
                                    SPECIFICATIONS CAPACITY: 55 TON MAXIMUM BENDING LENGTH: 82” DISTANCE BETWEEN HOUSINGS: 59.84” STROKE: 3.9" NUMBER OF CYLINDERS: 3 MAXIMUM PRESSURE: 2,627 PSI OPEN HEIGHT: 14.58” CLOSED HEIGHT: 10.67” THR
                                    • Tonnage: 55T
                                      HTC MODEL 500-10A HYDRAULIC POWER SQUARING SHEAR, 1/2” x 124”
                                      $RFQ
                                      HTC MODEL 500-10A HYDRAULIC POWER SQUARING SHEAR, 1/2” x 124”
                                      SPECIFICATIONS MAXIMUM CAPACITY: 1/2” CUTTING WIDTH: 124” WIDTH OVERALL: 148” SHIP HEIGHT: 98” OVERALL DEPTH: 98” BLADE SIZE: 1” X 4” HIGH CAPACITY RAKE/ROOT: 5/8” STANDARD RAKE ANGLE/ROOT: 1/2” HOLD DOWN CYLIND
                                      • Maximum thickness: 0.5"
                                      • Cutting length: 124"
                                        HTC MODEL 200-12H HYDRAULIC PRESS BRAKE, 12’ X 200 TON
                                        $RFQ
                                        HTC MODEL 200-12H HYDRAULIC PRESS BRAKE, 12’ X 200 TON
                                        MAXIMUM FORMING TONNAGE: 200 TONS MAXIMUM PUNCHING TONNAGE: 132 TONS RATING BETWEEN HOUSINGS: 5/16” X 10’ DIE OPENING RECOMMENDED: 5-1/2” FULL LENGTH RATING: 1/4” X 12’ DIE OPENING RECOMMENDED: 2” DISTANCE BETWEEN
                                        • Tonnage: 200T
                                          2011 GRIZZLY G5960 GEARED HEAD LATHE, 14” X 40
                                          $RFQ
                                          2011 GRIZZLY G5960 GEARED HEAD LATHE, 14” X 40
                                          SPECIFICATIONS SWING OVER BED: 13-3/4" SWING OVER GAP: 19-1/2” SWING OVER SADDLE: 8-5/8” DISTANCE BETWEEN CENTERS: 40" CROSS SLIDE TRAVEL: 6-7/8” SPINDLE BORE: 1-7/16” TAPER: 5 MT SPEEDS (16):
                                          • Swing: 14"
                                          • Centers: 40"
                                            2018 HOMAG MODEL SWT-335-QCH THREE HEAD WIDE BELT SANDER, 54” BELT
                                            $RFQ
                                            2018 HOMAG MODEL SWT-335-QCH THREE HEAD WIDE BELT SANDER, 54” BELT
                                            Ideal for veneer, lacquer, solid wood, high gloss, solid surface & special effect sanding. SPECIFICATIONS SANDING HEADS: 3 SANDING WIDTH: 53” ABRASIVE BELT: 54”X 103” WORKING THICKNESS: 1/8” – 6.25” FEED S
                                            ST INDUSTRIES 2450 OPTICAL COMPARATOR WITH M2E TOUCH SCREEN, 24"
                                            $RFQ
                                            ST INDUSTRIES 2450 OPTICAL COMPARATOR WITH M2E TOUCH SCREEN, 24"
                                            SPECIFICATIONS SCREEN DIAMETER: 24” PROFILE ILLUMINATION: HORIZONTAL IMAGE: ERECT WORK STAGE MEASURING TABLE: 5” X 24" X-AXIS: 12” Y-AXIS: 8” WORKLOAD CAPACITY: 200 LBS HELIX ADJUSTMENT: +/- 15
                                            • Screen diameter: 24"
                                              5/16" RMG 15 Wire Straighten & Cut Machine
                                              $RFQ
                                              5/16" RMG 15 Wire Straighten & Cut Machine
                                              No description providedCuts Per Minute (Max)400 FPM Shortest Cut3" Wire Capacity Range.062" - .312" Maximum Length6' Feed Speeds (FPM)400 FPM Length Tolerance+/- .005" Electrics230/3/60
                                              5/16" Hartford 5-250 DSSD Cold Header
                                              $RFQ
                                              5/16" Hartford 5-250 DSSD Cold Header
                                              No description providedMaximum Cutoff Diameter5/16" Wire Cutoff Length Maximum2-13/16" Maximum Length Under Head1-9/16" Punch Knockout Stroke.337" Maximum Production250 PPM Approx. Floor Space4' x 8' Approx. Weight11,60
                                              • Maximum workpiece diameter: 0.312"
                                              • Maximum workpiece length: 2.825"
                                                2006 GEKA HYDRACROP 110S HYDRAULIC IRONWORKER, 120 TON
                                                $RFQ
                                                2006 GEKA HYDRACROP 110S HYDRAULIC IRONWORKER, 120 TON
                                                PUNCH POWER: 120 TON MAXIMUM WITH QUICK CHANGE SYSTEM: 1-1/2” IN 3/4” DEPTH OF THROAT: 12” TRAVEL: 3-5/32” WORKING HEIGHT: 45-1/8” SHEAR FOR FLATS FLATS: 24” X 5/8” LENGTH OF BLADES:
                                                • Angle L1: 6"
                                                • Angle L2: 6"
                                                  2017 HAAS DS-30SSY Dual Spindle CNC Lathe, Milling, Y-Axis, Barfeed, 2"
                                                  $RFQ
                                                  2017 HAAS DS-30SSY Dual Spindle CNC Lathe, Milling, Y-Axis, Barfeed, 2"
                                                  SWING DIAMETER OVER FRONT APRON: 31.75” OVER CROSS SLIDE: 20.75” OVER SECOND SPINDLE: 21.75 CAPACITIES TURNING DIAMETER: 16” TURNING LENGTH: 23" STANDARD BAR CAPACITY: 2" SPINDLE SPINDLE NOSE: A2-6 SP
                                                  • Swing: 31.75"
                                                  • Centers: 32"
                                                    INGERSOLL-RAND T30/10T3NL (15 HP) RECIPROCATING DUPLEX AIR COMPRESOR
                                                    $21,162
                                                    INGERSOLL-RAND T30/10T3NL (15 HP) RECIPROCATING DUPLEX AIR COMPRESOR
                                                    SPECIFICATIONS PUMP MOTORS (2): 15 HP ELECTRICS: 460 VOLTS, 3 PH, 60 CYC EQUIPPED WITH HORIZONTAL TANK RATED 200 PSI MAGNETIC STARTER INGERSOLL RAND DXR-140 REFRIGERATED AIR DRYER PRICE: $ 5,750.00
                                                    Six stand H/V billet mill, 30" & 26" diameter rolls, 1500 hp
                                                    $RFQ
                                                    Six stand H/V billet mill, 30" & 26" diameter rolls, 1500 hp
                                                    Will sell individual stands, roller bearings, spare rolls, chocks and bearings
                                                    32" x 60" 2-Hi Blaw Knox, hot, reversing Bloom/slab rolling mill
                                                    $RFQ
                                                    32" x 60" 2-Hi Blaw Knox, hot, reversing Bloom/slab rolling mill
                                                    1966 Blaw Knox reversing 2-Hi rolling mill complete with manipulators, front & back roller tables, crop shear, down coiler
                                                    2006 CITIZEN MODEL C16 TYPE VII SWISS STYLE CNC LATHE, 16 MM BAR
                                                    $RFQ
                                                    2006 CITIZEN MODEL C16 TYPE VII SWISS STYLE CNC LATHE, 16 MM BAR
                                                    SPECIFICATIONS MAXIMUM MACHINING DIAMETER: 5/8" MAXIMUM MACHINING LENGTH: 7.87" PER CHUCKING MAIN SPINDLE SPEED: 200 - 10,000 RPM BACK SPINDLE SPEED: 200 - 10,000 RPM ROTARY TOOL SPINDLE S
                                                    • Spindle hole diameter: 0.62"
                                                      1982 TOS SN71B GAP BED ENGINE LATHE WITH INCH/METRIC THREADING, 28” X 80&qu
                                                      $12,500
                                                      1982 TOS SN71B GAP BED ENGINE LATHE WITH INCH/METRIC THREADING, 28” X 80&qu
                                                      CAPACITY SWING OVER BED: 28" SWING OVER CROSS SLIDE: 16.5” SWING OVER GAP: 37.5” DISTANCE BETWEEN CENTERS: 80” BED WIDTH: 18” HEADSTOCK SPINDLE SPEEDS (16): 10 – 1,000 RPM SPINDLE HOLE: 2-13/16” HEADSTO
                                                      • Swing: 28"
                                                      • Centers: 80"
                                                        TERNSTROM & SWANSON (HARDINGE COPY) HSL-59 SUPER PRECISION SPEED LATHE,
                                                        $1,950
                                                        TERNSTROM & SWANSON (HARDINGE COPY) HSL-59 SUPER PRECISION SPEED LATHE,
                                                        SPECIFICATIONS SWING OVER BED: 9" SPINDLE SPEEDS: 750, 1800, 3000 RPM LENGTH OF BED FROM FACE OF SPINDLE: 10" SPINDLE MOTOR: 0.5 HP SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16" WITH HEXAGON
                                                        • Swing: 9"
                                                          1982 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                          $2,950
                                                          1982 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                          SPECIFICATIONS SWING OVER BED: 9" SPINDLE SPEEDS: 750, 1800, 3000 RPM LENGTH OF BED FROM FACE OF SPINDLE: 10" SPINDLE MOTOR: 0.5 HP SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16" WITH HEXAGON
                                                          • Swing: 9"
                                                            1985 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                            $3,950
                                                            1985 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                            SPECIFICATIONS SWING OVER BED: 9" SPINDLE SPEEDS: 750, 1800, 3000 RPM LENGTH OF BED FROM FACE OF SPINDLE: 10" SPINDLE MOTOR: 0.5 HP SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16" WITH HEXAGON
                                                            • Swing: 9"
                                                              1985 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                              $2,950
                                                              1985 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                              SPECIFICATIONS SWING OVER BED: 9" SPINDLE SPEEDS: 750, 1800, 3000 RPM LENGTH OF BED FROM FACE OF SPINDLE: 10" SPINDLE MOTOR: 0.5 HP SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16" WITH HEXAGON
                                                              • Swing: 9"
                                                                1983 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                                $2,950
                                                                1983 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                                SPECIFICATIONS SWING OVER BED: 9" SPINDLE SPEEDS: 750, 1800, 3000 RPM LENGTH OF BED FROM FACE OF SPINDLE: 10" SPINDLE MOTOR: 0.5 HP SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16" WITH HEXAGON
                                                                • Swing: 9"
                                                                  2013 HAAS VF-11/50 VERTICAL MACHINING CENTER, 120" X 40" X 30&quo
                                                                  $RFQ
                                                                  2013 HAAS VF-11/50 VERTICAL MACHINING CENTER, 120" X 40" X 30&quo
                                                                  TRAVELS X-AXIS: 120" Y-AXIS: 40" Z-AXIS: 30" SPINDLE NOSE TO TABLE: 5 – 35" TABLE LENGTH: 120" WIDTH: 28" MAX. WEIGHT ON TABLE: 4,000 LBS
                                                                  • X axis: 120"
                                                                  • Y axis: 40"
                                                                    1982 TOS SN71B GAP BED ENGINE LATHE WITH INCH/METRIC THREADING, 28” X 80&qu
                                                                    $RFQ
                                                                    1982 TOS SN71B GAP BED ENGINE LATHE WITH INCH/METRIC THREADING, 28” X 80&qu
                                                                    CAPACITY SWING OVER BED: 28" SWING OVER CROSS SLIDE: 16.5” SWING OVER GAP: 37.5” DISTANCE BETWEEN CENTERS: 80” BED WIDTH: 18” HEADSTOCK SPINDLE SPEEDS (16): 10 – 1,000 RPM SPINDLE HOLE: 2-13/16” HEADSTO
                                                                    • Swing: 28"
                                                                    • Centers: 80"
                                                                      2000 MITSUBISHI MODEL FX10 WIRE EDM, 14” X 10” X 9”
                                                                      $RFQ
                                                                      2000 MITSUBISHI MODEL FX10 WIRE EDM, 14” X 10” X 9”
                                                                      SPECIFICATIONS TRAVELS: 14” X 10” X 9” U/V TRAVELS: 1.25” X 1.25” INSIDE TANK MEASUREMENT: 31.4” X 31.4” TAPER CUTTING: 15° @ 4” RESOLUTION: .000002” TABLE RAPID FEED: 51.2 IPM WIRE DIAMETER: .008” - .012”
                                                                      • X axis travel: 14"
                                                                      • Y axis travel: 10"
                                                                        1998 CLAUSING COLCHESTER 8031 GEARED HEAD, GAP BED ENGINE LATHE, 15" x
                                                                        $RFQ
                                                                        1998 CLAUSING COLCHESTER 8031 GEARED HEAD, GAP BED ENGINE LATHE, 15" x
                                                                        CAPACITIES SWING OVER BED: 15-1/4" SWING OVER SADDLE WAYS: 15-1/4" SWING IN GAP: 23” SWING OVER CROSS SLIDE: 9-1/2" BAR CAPACITY THRU SPINDLE: 2-1/8" DISTANCE BETWEEN CENTERS: 50" HEADST
                                                                        • Swing: 15"
                                                                        • Centers: 50"
                                                                          2000 HAAS VF-0 VERTICAL MACHINING CENTER WITH HAAS CONTROL, 20” X 16” X 20”
                                                                          $14,500
                                                                          2000 HAAS VF-0 VERTICAL MACHINING CENTER WITH HAAS CONTROL, 20” X 16” X 20”
                                                                          TRAVELS X AXIS: 20” Y AXIS: 16” Z AXIS: 20” SPINDLE NOSE TO TABLE: 4 –24” TABLE LENGTH: 26” WIDTH: 14” MAXIMUM WEIGHT ON TABLE: 3,000 LBS T-SLOTS T-SLOTS WIDTH: .625” CENTER DIS
                                                                          • X axis: 20"
                                                                          • Y axis: 16"
                                                                            USED SHELDON MODEL 0 HORIZONTAL MILL
                                                                            $1,250
                                                                            USED SHELDON MODEL 0 HORIZONTAL MILL
                                                                            HOLE THROUGH SPINDLE: 9/16” SIZE OF SPINDLE TAPER: NO 9 B & S SIZE OF TABLE: 5” X 20” NUMBER OF TABLE T-SLOTS: 1 WIDTH OF T-SLOT: 7/16” LONGITUDINAL TRAVEL OF TABLE: 12” CROSS TRAVEL OF TABLE: 5-1/2” VERTICAL
                                                                            • Table width: 5"
                                                                            • Table length: 20"
                                                                              1991 SCOTCHMAN BEWO MODEL CPO-350HT/PK COLD SAW, 14"
                                                                              $RFQ
                                                                              1991 SCOTCHMAN BEWO MODEL CPO-350HT/PK COLD SAW, 14"
                                                                              TUBING, 90 DEGREES ROUND: 4-7/8" SQUARE: 4-3/8" X 4-3/8" RECTANGLE: 5-1/2" X 4" TUBING, 45 DEGREES ROUND: 4-3/8" SQUARE: 4" X 4" RECTANGLE: 4" X 4" SOLID, 90
                                                                              • Blade diameter: 14"
                                                                                CLAUSING MODEL 2234-501 FLOOR DRILL WITH AIR HYDRAULIC FEED, 20"
                                                                                $RFQ
                                                                                CLAUSING MODEL 2234-501 FLOOR DRILL WITH AIR HYDRAULIC FEED, 20"
                                                                                SPECIFICATIONS CAPACITY, HAND FEED: 1-1/4” DRILL TO CENTER OF CIRCLE: 20" SPINDLE TAPER: #3 MT SPINDLE TRAVEL: 6-1/2" COLUMN: 4” DIAMETER QUILL: 2-1/2” DIAMETER PRODUCTION TABLE: 45” X 29” NUMBER OF SPE
                                                                                • Swing: 20"
                                                                                • Motor: 1HP
                                                                                  CLAUSING 2286 2-SPINDLE VARIABLE SPEED DRILL PRESS, 20" THROAT
                                                                                  $4,950
                                                                                  CLAUSING 2286 2-SPINDLE VARIABLE SPEED DRILL PRESS, 20" THROAT
                                                                                  SPECIFICATIONS DRILL TO CENTER OF CIRCLE: 20" DIA CAPACITY (HAND FEED): 1-1/4" DIA SPINDLE NOSE: # 3 MORSE TAPER, 1.74" OD SPINDLE TRAVEL: 6-1/2" COLUMN (GROUND STEEL): 4" DIA
                                                                                  2014 CHEVALIER FSG-1224ADIII AUTO SURFACE GRINDER WITH PLC, 12" X 24&q
                                                                                  $RFQ
                                                                                  2014 CHEVALIER FSG-1224ADIII AUTO SURFACE GRINDER WITH PLC, 12" X 24&q
                                                                                  SPECIFICATIONS MAXIMUM GRINDING LENGTH: 24" MAXIMUM GRINDING WIDTH: 12" MAXIMUM SPINDLE CENTER TO TABLE SURFACE: 24" STANDARD MAGNETIC CHUCK SIZE: 11-3/4" X 23-5/8" GRINDING WHEEL: 14&quo
                                                                                  • Table width: 12"
                                                                                  • Table length: 24"
                                                                                    1992 CHEVALIER MODEL FSG-1224AD FULLY AUTOMATIC SURFACE GRINDER, 12”X 24”
                                                                                    $RFQ
                                                                                    1992 CHEVALIER MODEL FSG-1224AD FULLY AUTOMATIC SURFACE GRINDER, 12”X 24”
                                                                                    TABLE SIZE: 11-3/4" X 23-5/8" MAX GRINDING LENGTH: 24" MAX GRINDING WIDTH: 12" MAX DISTANCE FROM TABLE SURFACE TO SPINDLE CENTERLINE: 19-3/4” STANDARD MAGNETIC CHUCK SIZE: 11-3/4" X
                                                                                    • Table width: 12"
                                                                                    • Table length: 24"
                                                                                      2000 ALLIANT MODEL 949-3V VARIABLE SPEED VERTICAL MILL, 9" X 49"
                                                                                      $2,950
                                                                                      2000 ALLIANT MODEL 949-3V VARIABLE SPEED VERTICAL MILL, 9" X 49"
                                                                                      TABLE WORKING SURFACE: 9” X 49” LONGITUDINAL TRAVEL: 37” CROSS TRAVEL: 12-3/4" VERTICAL KNEE TRAVEL: 17" T-SLOT SIZE: 5/8” SPINDLE SPEED DRIVE: 70 – 4,200 RPM TAPER: R-8 MOTOR: 3 HP QUILL QUILL
                                                                                      • Table width: 9"
                                                                                      • Table length: 49"
                                                                                        2000 ALLIANT MODEL 949-3V VARIABLE SPEED VERTICAL MILL, 9" X 49"
                                                                                        $2,950
                                                                                        2000 ALLIANT MODEL 949-3V VARIABLE SPEED VERTICAL MILL, 9" X 49"
                                                                                        TABLE WORKING SURFACE: 9” X 49” LONGITUDINAL TRAVEL: 37” CROSS TRAVEL: 12-3/4" VERTICAL KNEE TRAVEL: 17" T-SLOT SIZE: 5/8” SPINDLE SPEED DRIVE: 70 – 4,200 RPM TAPER: R-8 MOTOR: 3 HP QUILL QUILL
                                                                                        • Table width: 9"
                                                                                        • Table length: 49"
                                                                                          2000 HARDINGE MODEL VMC1000II CNC VERTICAL MACHINING CENTER, 40" X 20&
                                                                                          $RFQ
                                                                                          2000 HARDINGE MODEL VMC1000II CNC VERTICAL MACHINING CENTER, 40" X 20&
                                                                                          TRAVELS X-AXIS LONGITUDINAL: 40.16" Y-AXIS CROSS: 20.08" Z-AXIS VERTICAL: 20.08" SPINDLE NOSE TO TABLE SURFACE: 6.1" TO 26.1" TABLE FRONT EDGE TO DOOR: 7.23" SPINDLE CENTER TO COLUMN:
                                                                                          • X axis: 40"
                                                                                          • Y axis: 20"
                                                                                            2014 COORD3 ARES 7.10.7 BRIDGE STYLE CMM, 39.9” X 25.5" x 25.5"
                                                                                            $RFQ
                                                                                            2014 COORD3 ARES 7.10.7 BRIDGE STYLE CMM, 39.9” X 25.5" x 25.5"
                                                                                            SPECIFICATIONS TRAVELS: 39.3” X 25.5” X 25.5” 3D POSITIONING SPEED: 500 MM/SEC MAXIMUM 3D ACCELERATION: 1,200 MM/SEC² RENISHAW PH20 PROBE SYSTEM RENISHAW PH20 INFINITELY INDEXABLE PROBE HEAD ALLOWING FOR RAPI
                                                                                            • X axis measuring range: 39.9"
                                                                                            • Y axis measuring range: 25.5"
                                                                                              1984 CLAUSING COLCHESTER 8031 VS, STRAIGHT BED ENGINE LATHE, 15" X 50&
                                                                                              $RFQ
                                                                                              1984 CLAUSING COLCHESTER 8031 VS, STRAIGHT BED ENGINE LATHE, 15" X 50&
                                                                                              CAPACITIES SWING OVER BED: 15-1/4" SWING OVER SADDLE WAYS: 15-1/4" SWING OVER CROSS SLIDE: 9-1/2" BAR CAPACITY THRU SPINDLE: 2-1/8" DISTANCE BETWEEN CENTERS: 50" HEADSTOCK SPINDLE NOSE:
                                                                                              • Swing: 15"
                                                                                              • Centers: 50"
                                                                                                3" Acme Hill XN Upsetter
                                                                                                $RFQ
                                                                                                3" Acme Hill XN Upsetter
                                                                                                No description providedDie Depth22" Die Width14" Die Length19-1/4" Die Opening5" Tool Holder Pocket Width5" Stock Gather7-5/8" Hold2" Stroke12" Header Slide Length80" HP30 Forging Pressure630 Tons Dimensions184" x 101" x
                                                                                                3/8" RMG Model 16 Wire Straighten & Cut Machine, W/Factory Clutchless Retrofit 2
                                                                                                $RFQ
                                                                                                3/8" RMG Model 16 Wire Straighten & Cut Machine, W/Factory Clutchless Retrofit 2
                                                                                                No description providedWire Diameter Range.062" - .375" Max. Cutoff Length16' Length Tolerance+/- .005" Electrics460/3/60 Factory Clutchless Retrofit 2011, Left to Rig
                                                                                                3/16" National High Speed DSSD Tubular Rivet Header
                                                                                                $RFQ
                                                                                                3/16" National High Speed DSSD Tubular Rivet Header
                                                                                                No description providedMaximum Cutoff Diameter3/16" Maximum Cutoff Length1-3/16" Maximum Shank Length3/4" Maximum Production300 Electrics220V / 60 Hz / 3 Phase Bushing
                                                                                                2000 HAAS MODEL VF-4 VERTICAL MACHINING CENTER, 50" X 20" X 25&qu
                                                                                                $RFQ
                                                                                                2000 HAAS MODEL VF-4 VERTICAL MACHINING CENTER, 50" X 20" X 25&qu
                                                                                                TRAVELS X-AXIS: 50" Y-AXIS: 20" Z-AXIS: 25" SPINDLE NOSE TO TABLE: 4" – 29" TABLE LENGTH: 52" WIDTH: 18" MAXIMUM WEIGHT ON TABLE: 3,500 LBS T-SLOTS T-SLOTS WIDTH: .625&quo
                                                                                                • X axis: 50"
                                                                                                • Y axis: 20"
                                                                                                  Used Master Oscillating Spindle Sander
                                                                                                  $2,500
                                                                                                  Used Master Oscillating Spindle Sander
                                                                                                  Used Master Oscillating Spindle Sander. Spindle Tilts 0 - 45 degrees. Variable spindle speed. 230 volt, 3 phase.
                                                                                                  2004 HANSFORD DAVIS MODEL 15B AUTOMATIC KEYSEATER, 1/16" – 1-1/2"
                                                                                                  $RFQ
                                                                                                  2004 HANSFORD DAVIS MODEL 15B AUTOMATIC KEYSEATER, 1/16" – 1-1/2"
                                                                                                  SPECIFICATIONS KEYWAY CUTTING CAPACITY (STEEL): 1/16" TO 1 1/2" THROAT DEPTH, FROM FACE OF 1" WIDE CUTTER TO ARM POST: 19" MAXIMUM HEIGHT OF WORK FROM TABLE SURFACE: 12" MAXIMUM LENGTH
                                                                                                  • Keyway width: 1.5"
                                                                                                  • Keyway length: 18"
                                                                                                    Used Powermatic 18" Planer Model 180
                                                                                                    $7,500
                                                                                                    Used Powermatic 18" Planer Model 180
                                                                                                    Used Powermatic 18" Planer Model 180 SN. 88807250 7.5 HP, 208-230/460 volt, presently wired 208-230 Knife grinding attachment included
                                                                                                    Used Yates American 12" Jointer
                                                                                                    $3,500
                                                                                                    Used Yates American 12" Jointer
                                                                                                    Used Yates American 12" Jointer. Model #1 SN. R-2310 4 Knife Cutter Head 220 Volt, 3 Phase
                                                                                                    Used Original 16" Metal Cutting Saw
                                                                                                    $12,900
                                                                                                    Used Original 16" Metal Cutting Saw
                                                                                                    Used Original 16" Metal Cutting Saw. Model 3579 16 L Type 7 Specs: Arm: Long Blade size: 16" HP: 7.5 HP Voltage: 208 Volt only, 3 Phase Feed Voltage: 120 volt Brake: Automatic Arbor: 1" dia. x
                                                                                                    Used Original 16" Metal Cutting Saw
                                                                                                    $12,900
                                                                                                    Used Original 16" Metal Cutting Saw
                                                                                                    Used Original 16" Metal Cutting Saw. Model 3579 16 L Type 7 Specs: Arm: Long Blade size: 16" HP: 7.5 HP Voltage: 208 Volt only, 3 Phase Feed Voltage: 120 volt Brake: Automatic Arbor: 1" dia. x
                                                                                                    3/16" National High Speed DSSDTubular Rivet Header
                                                                                                    $RFQ
                                                                                                    3/16" National High Speed DSSDTubular Rivet Header
                                                                                                    No description providedMaximum Cutoff Diameter3/16" Maximum Cutoff Length1-3/16" Maximum Shank Length3/4" Maximum Production300 Electrics208V/60Hz/3 Phase Bushing Cut
                                                                                                    72" x 40,000# x 14 gauge Welty Way blanking & slitting line
                                                                                                    $RFQ
                                                                                                    72" x 40,000# x 14 gauge Welty Way blanking & slitting line
                                                                                                    Slitting and cut to length line, 40,000# , installed, inspect running, flying shear, stacking table, scrap winders, coil car, uncoiler, complete line
                                                                                                    72" x 40,000# x 14 gauge Welty Way blanking & slitting line
                                                                                                    $RFQ
                                                                                                    72" x 40,000# x 14 gauge Welty Way blanking & slitting line
                                                                                                    Slitting and cut to length line, 40,000# , installed, inspect running, flying shear, stacking table, scrap winders, coil car, uncoiler, complete line
                                                                                                    CM LOADSTAR ELECTRIC CHAIN HOIST
                                                                                                    $1,950
                                                                                                    CM LOADSTAR ELECTRIC CHAIN HOIST
                                                                                                    CM LOADSTAR 2 TON ELECTRIC CHAIN HOIST PRICE: Loaded on Truck, Our Warehouse, York, PA …… $1,950.00 HMC Stock # 19080 Hoist Serial No.: XL0221 Hoist Model No.: Unknown New Date: Unknown Rated Lift Capacity: 2 Sho
                                                                                                    CINCINNATI 330-18 VERCIPOWER VERTICAL MILL
                                                                                                    $19,500
                                                                                                    CINCINNATI 330-18 VERCIPOWER VERTICAL MILL
                                                                                                    CINCINNATI 330-18 VERCIPOWER VERTICAL MILL PRICE: Loaded on Truck, Our Warehouse, York, PA …… $19,500.00 HMC Stock No. 18346-P Machine Serial No. 311031V5W-3 Machine Model No. 330-18 VerciPower New Date: 1971 - Rebui
                                                                                                    GIDDINGS & LEWIS MANUAL ROTARY TABLE
                                                                                                    $8,950
                                                                                                    GIDDINGS & LEWIS MANUAL ROTARY TABLE
                                                                                                    48" X 48" GIDDINGS & LEWIS MANUAL ROTARY TABLE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $8,950.00 HMC Stock No. 18227-P Machine Serial No. Unknown Machine Model No. Unknown New Date: Unknown Table Top: 48"
                                                                                                    EVERISING HORIZONTAL BAND SAW
                                                                                                    $5,950
                                                                                                    EVERISING HORIZONTAL BAND SAW
                                                                                                    EVERISING 10" HORIZONTAL BAND SAW PRICE: Loaded on Truck, Our Warehouse, York, PA …… $5,950.00 HMC Stock No. 18056 Machine Serial No. 10045 Machine Model No. S-260HA New Date: Unknown Made in Taiwan Rated Capacity Ro
                                                                                                    Used Brandt Optimat KD 78/2C
                                                                                                    $14,995
                                                                                                    Used Brandt Optimat KD 78/2C
                                                                                                    Used Brandt Optimat KD 78/2C Edgebander. Year: 2000 230v., 3 Phase Laminate, wood, PVC 3mm capable. Pellet hot melt glue Auto feed, front & End trimmers Top/Bottom trimmers Top/Bottom profile trimmers Co
                                                                                                    1997 SOUTHWESTERN INDUSTRIES TRAK DPM 3-AXIS CNC BED TYPE MILL, 10" x
                                                                                                    $RFQ
                                                                                                    1997 SOUTHWESTERN INDUSTRIES TRAK DPM 3-AXIS CNC BED TYPE MILL, 10" x
                                                                                                    TABLE TABLE SIZE: 50" X 10" T-SLOTS: 5/8" W X 3 NO. X 2-9/16" PITCH MAXIMUM WEIGHT ON TABLE: 1,320 LBS TRAVELS X-AXIS TRAVEL: 31" Y-AXIS TRAVEL: 17" Z-AXIS TRAVEL: 23.5"
                                                                                                    • Table width: 10"
                                                                                                    • Table length: 50"
                                                                                                      1999 DO-ALL MODEL BRM-DEBURRING MACHINE, 2” - 6”
                                                                                                      $RFQ
                                                                                                      1999 DO-ALL MODEL BRM-DEBURRING MACHINE, 2” - 6”
                                                                                                      SPECIFICATIONS CAPACITY, DIAMETER: 2” - 6” CAPACITY (LENGTH): 2” - 6” BELT SPEED: 2 TO 20 FPM PARTS PER HOUR: 200 TO 600 DRIVE MOTOR: 1/42 HP BELT MOTOR: 1/2 HP UPPER BELT MOTOR: 1/2 HP GENERAL DIMENSIONS,
                                                                                                      • Width: 6"
                                                                                                        Categories:
                                                                                                        Condition:
                                                                                                        Manufacturer:
                                                                                                        Location:
                                                                                                        Price:
                                                                                                        •  to 
                                                                                                        <Prev | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | Next>