buy & sell, new & used machinery, machine tools & equipment

<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>
Refine: Viewing 1801 - 1900 of 20776 matches
Sort by:
Items Per Page:  20 |  50 |  100
Hyster S60FT Forklift
$10,500
Hyster S60FT Forklift
Capacity: 6,000 lbs Max Lift: 187" Engine: PSI 2.4L Fuel: Propane Tires: Solid Side Shift: Yes Mast: 3 Hours: 10,303 Year: 2006 Weight: 10,310lbs Dimensions: 44" x 141" x 87"
  • Lifting capacity: 3T
  • Lift height: 15.5'
    Charmilles EDM CUT 20 P EDM Milling
    $36,500
    Charmilles EDM CUT 20 P EDM Milling
    Type: CNC wire cut Tank: 28" x 39" x 24" x-Axis Travel: 13" y-Axis Travel: 9.8" z-Axis Travel: 9.8" Year: 2015 Phases: 3 Weight: 6,370lbs Dimensions: 99" x 99" x 87"
    • X axis travel: 13"
    • Y axis travel: 9.8"
      Charmilles AGIE SP-1 EDM Milling
      $25,000
      Charmilles AGIE SP-1 EDM Milling
      Type: CNC electric discharge with lead Tank: 19" x 31" x 9" x-Axis Travel: 13" y-Axis Travel: 9.8" z-Axis Travel: 9.8" Year: 2014 Phases: 3 Weight: 3,160lbs Dimensions: 58" x 60
      Haas TM-2 CNC Milling Machine
      $16,500
      Haas TM-2 CNC Milling Machine
      Table: 10" x 57" Spindle: Cat 40 x-Axis Travel: 40" y-Axis Travel: 16" z-Axis Travel: 16" RPM: 4,000RPM Controller: Haas Year: 2004 Voltage / Phase: 240 / 3 Weight: 5,500lbs Dimensions:
      Haas VF-2SS Machining Center
      $51,500
      Haas VF-2SS Machining Center
      Table: 14" x 36" Spindle: CAT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 24 RPM: 12,000RPM Controller: Haas Year: 2017 4th axis: Ready 5th axis: Available
      Fadal VMC15 Machining Center
      $19,000
      Fadal VMC15 Machining Center
      Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
      Fadal VMC15XT Machining Center
      $19,500
      Fadal VMC15XT Machining Center
      Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
      Cincinnati Milacron – 3 axis gantry type profiler mill
      $130,000
      Cincinnati Milacron – 3 axis gantry type profiler mill
      This mill was modified 2013 - JD SysTec LLC Robotics. Used to have two head but was customized by Criterion Machinery for FMC Munitions to make ballistic panels for armored personnel carriers. 10’x42’ table measuring
      • X axis: 380"
      • Y axis: 120"
        2001 Fadal VMC-4020 Vertical Machining Center
        $12,500
        2001 Fadal VMC-4020 Vertical Machining Center
        2001 Fadal Model VMC-4020 Vertical Machining Center Specifications: Table Size 48" x 20" (1,500 lbs. max.) X Axis Travel 40″ Y Axis Travel
        • X axis: 40"
        • Y axis: 20"
          Doosan D80S-5 Forklift
          $45,000
          Doosan D80S-5 Forklift
          Capacity: 8ton Max. Lift: 122" Engine: Doosan Fuel: Diesel Tires: Solid Mast: Duplex Year: 2012 Weight: 25,450lbs Dimensions: 88" x 202" x 112"
          Laser Cutting System 6kW - Gator
          $189,000
          Laser Cutting System 6kW - Gator
          The Gator cutting machine delivered by Provetco Technology ( www.provetco.com ) is designed to meet the demands of heavy industrial use. It features a robust body structure that ensures both stability and longevity. Whet
          • Wattage: 6000W
          • X axis travel: 5'
            Gator Folding Machine (CNC) 10' x 12ga
            $65,000
            Gator Folding Machine (CNC) 10' x 12ga
            Experience unmatched precision and efficiency with the state-of-the-art Gator CNC Folding Machine. Designed to meet the demands of modern fabrication, this machine delivers superior performance in folding metal sheets wi
            • Maximum thickness capacity: 12Ga
            • Bending length: 120"
              POREBA TCG-160-10M Lathe
              $109,000
              POREBA TCG-160-10M Lathe
              Swing over bed: 90" Between centers: 32' Spindle bore: 4" Threads: Std Tailstock spindle taper: Yes Chuck: 5' Dimensions: 94" x 600" x 102"
              • Swing: 90"
                Normec Cutting Machine
                $13,000
                Normec Cutting Machine
                For Sale: Cutting Machine with Guillotine Knife 401-01-100 We are selling one cutting machine equipped with a guillotine knife and featuring a cutting width of 100 mm. This installation is specifically designed for cutt
                Normec Press: 150mm
                $20,000
                Normec Press: 150mm
                For Sale: NorMec Splicing Station Model 110-00-165-BR We are selling 1 NorMec splicing station (model 110-00-165-BR) equipped with B&R control and touch display. This station represents our most advanced model and i
                Normec Press: 120mm
                $20,000
                Normec Press: 120mm
                For Sale: NorMec Splicing Station Model 110-00-120-BR We are selling 1 NorMec splicing station (model 110-00-120-BR) with a B&R control system and touch display. This station is our most advanced model, designed for
                Supermax YM-M185 Milling Machine
                $5,500
                Supermax YM-M185 Milling Machine
                Type: Vertical Table: 12" x 58" Speed: Variable Automatic feed: Yes HP: 1.5 Weight: 4,025lb Voltage / Phases: 220 / 3 Dimensions: 74" x 76" x 96"
                • Table width: 12"
                • Table length: 58"
                  2007 Doosan Model TL-2000 (4 Axis) CNC Lathe Fanuc 18i-TB Control
                  $29,500
                  2007 Doosan Model TL-2000 (4 Axis) CNC Lathe Fanuc 18i-TB Control
                  2007 Doosan Model TL-2000 (4 Axis) CNC Lathe Fanuc 18i-TB Control Specifications Maximum Swing Over Bed 21.75" Maximum Turning Diameter (Upper Turret) 14.6” Maximum Turning Diameter (Lower Turret)
                  • Swing: 21.75"
                  • Centers: 24.8"
                    HEM Automatic Horizontal Band Saw Model H90A-4
                    $8,950
                    HEM Automatic Horizontal Band Saw Model H90A-4
                    HEM Automatic Horizontal Band Saw Model H90A-4 Specifications: (S/N 885605) Maximum Cutting Capacity (Round) 12.75″ x 12.75″ Maximum Cutting Capacity (Rect) 12″ Blade Size 1″ x 12′ 10″ x 0.35″ Blade Speed 60 – 3
                    • Width capacity: 12.75"
                    • Height capacity: 12.75"
                      NEW HydMech H-14A Band Saw
                      $63,100
                      NEW HydMech H-14A Band Saw
                      Capacity 14" x 14" Cooling System Automatic Feeder Angle Cut 90° Blade 1-1/4" x 15'2" 8.8 HP Voltage 480/ 3 Phase Weight 6,172 lbs Dimensions 88" x 63" x 78" With Hydr
                      H Lioho LH-1 1/2 Arlington Milling Machine
                      $4,800
                      H Lioho LH-1 1/2 Arlington Milling Machine
                      Type: Vertical Table: 9" x 42" Spindle: R8 Automatic feed: X Axis HP: 1.5 Dimensions: 56" x 58" x 82"
                      Oster 716
                      $8,900
                      Oster 716
                      Swing over bed: 20" Spindle bore: 7-1/2" Between centers: 18" HP: 5 Voltage / Phase: 440 / 3 Weight: 3,550 lbs Dimensions: 28"x 79" x 57" Capacity: Tube: 1" to 6", Screw: 1&
                      Pines Engineering Co. 11015-64033 Tube Bender
                      $6,500
                      Pines Engineering Co. 11015-64033 Tube Bender
                      Type: Hydraulic Bending radius: 180° Dies: Square 3/4" HP: 5 Voltage / Phase: 220 | 3 Dimensions: 39" x 148" x 40" Capacity: 1-1/2"
                      Pullmax E 23D Shear
                      $22,500
                      Pullmax E 23D Shear
                      Type: Hydraulic Backgauge: Motorized HP: 15 :: Phase: 3 Year: 1985 Dimensions: 90" x 138" x 83" Capacity: 10' x 1/4"
                      George Gorton Machine Co. 2-28 Milling Machine
                      $5,500
                      George Gorton Machine Co. 2-28 Milling Machine
                      Type: Horizontal Table: 12" x 56" Spindle: CAT 50 HP: 3 :: Phase: 3 Dimensions: 66" x 81" x 65"
                      Okamoto PSG-64 Grinder
                      $10,500
                      Okamoto PSG-64 Grinder
                      Type: Hydraulic Grinding wheel size: 9-1/2" Table: 16" x 31" Year: 1981 Voltage / Phase: 220 | 3 Dimensions: 93" x 71" x 76"
                      • Maximum gear diameter: 9.5"
                        1999 Femco Horizontal Boring Mill Model BMC-110 R1 - Fanuc 18-M
                        $35,000
                        1999 Femco Horizontal Boring Mill Model BMC-110 R1 - Fanuc 18-M
                        1999 Femco Horizontal Boring Mill Model BMC-110 R1 Specifications: Table Size 44″ x 49″ (8,819 lbs. cap.) Table Longitudinal Travel (X Axis) 55″ Vertical Travel (Y Axis) 47.25" Travel (W Axis) 43.30"
                        • Spindle diameter: 8.86"
                        • X axis travel: 55"
                          New ELGi Skid Mounted Air Compressor
                          $25,500
                          New ELGi Skid Mounted Air Compressor
                          New, never used ELGi DS185T4F 185cfm, 49hp Stored indoors 0 Hours Delivery Available
                          • Motor: 49HP
                            Mori Seiki SL-25MC (Live Tooling) Fanuc 10T Control (Very Good Condition)
                            $15,000
                            Mori Seiki SL-25MC (Live Tooling) Fanuc 10T Control (Very Good Condition)
                            Specifications: Swing Over Bed 20.5″ Maximum Turning Diameter 13.4″ Maximum Turning Length 20.9″ Swing Over Cross Slide 13.8″ Distance Between Centers 24.6″ X Axis Travel 11.3″ Z
                            • Swing: 20.5"
                            • Centers: 43.33"
                              2022 Takisawa TCN-2600 CNC Lathe - Fanuc 32i Model A (Like New Condition)
                              $99,500
                              2022 Takisawa TCN-2600 CNC Lathe - Fanuc 32i Model A (Like New Condition)
                              2022 Takisawa TCN-2600 CNC Lathe Fanuc 32i Model A Specifications: Swing Over Bed 16.53" Maximum Turning Diameter 11.02" Center Distance 20" Bar Capacity 2"
                              • Swing: 16.53"
                              • Centers: 20"
                                2008 Kitamura MyTrunion 5 (5 Axis Machining Center)
                                $69,500
                                2008 Kitamura MyTrunion 5 (5 Axis Machining Center)
                                Kitamura Mytrunion 5 Axis CNC Mill Fanuc 16iM CNC Control Specifications: Table: 24.8″ x 19.7″ (880 lbs.) Table to Spindle Nose: 3.9″ – 23.6″ Travels: X Axis: 32.3″ Y Axis: 29.3″ Z Axis: 19.6″ A Axis: 150
                                • X axis: 32.3"
                                • Y axis: 29.3"
                                  Sunnen Hone Model LBB-1699
                                  $4,950
                                  Sunnen Hone Model LBB-1699
                                  Sunnen Hone Model LBB-1699 Specifications: Spindle Speed 200 - 640 rpm Spindle Motor .5 Hp Diameter Range (ID) (Manual Stroking) .370 - 4.7” Honing Oil Capacity 15 gallons (58.8 L) Electrical Requirements 220V/
                                  • Maximum diameter: 4.7"
                                  • Stroke: 4.7"
                                    1999 Brother Model TC-S2A CNC Drilling & Tapping Machine
                                    $7,500
                                    1999 Brother Model TC-S2A CNC Drilling & Tapping Machine
                                    1999 Brother Model TC-S2A CNC Drilling & Tapping Machine Brother A00 CNC Control Specifications: Table Size (Maximum Load) 31.5″ x 11.8″ (330 lbs.) X-Axis Travel 27.5″ Y-Axis Travel
                                    • X axis: 27.5"
                                    • Y axis: 14.2"
                                      Southwestern Industries TRM 1840 CNC Lathe
                                      $13,500
                                      Southwestern Industries TRM 1840 CNC Lathe
                                      Swing over bed: 18" Spindle bore: 2" Between centers: 40" Tailstock spindle taper: 1-1/2" Voltage: 220v / 3 Phase Dimensions: 108" x 54" x 72"
                                      • Swing: 18"
                                      • Centers: 40"
                                        Supertec STG-600S Grinder
                                        $8,700
                                        Supertec STG-600S Grinder
                                        Type: Hydraulic Grinding wheel size: 15" Table: 7-1/4" x 38" Between centers: 18" HP: 6.4 Voltage: 220v / 3 Phase Weight: 8,000 lbs Dimensions: 102" x 65" x65"
                                        Spring Water Mfg. Co Inc. HPX115 Hydraulic Punch Machine
                                        $10,000
                                        Spring Water Mfg. Co Inc. HPX115 Hydraulic Punch Machine
                                        Type: Hydraulic Voltage: 480v / 3 Phase Dimensions: 48" x 56" x 82" Capacity: 70 Tons
                                        Thompson Grinder 2F Hydraulic
                                        $7,800
                                        Thompson Grinder 2F Hydraulic
                                        Type: Hydraulic Grinding wheel size: 8" x 1-1/4" Table: 8" x 24" Table type: Magnetic HP: 0.5 Voltage / Phase: 440 | 3 Dimensions: 52" x 86" x 85"
                                        Wayne HYD Hydraulic Press
                                        $18,000
                                        Wayne HYD Hydraulic Press
                                        Type: Hydraulic Stroke: 17" Table: 40" x 37" HP: 25 Voltage: 220v / 3 Phase Dimensions: 60" x 42" x 127" Capacity: 80 Tons
                                        • Tonnage: 80T
                                        • Stroke: 17"
                                          Speed-Bend PRO 12.3×192 Ermaksan Press Brake
                                          $RFQ
                                          Speed-Bend PRO 12.3×192 Ermaksan Press Brake
                                          PRODUCT NEW: IN STOCK Type: Hydraulic CNC Bed length: 12' 4" Between housings: 10' 7" Stroke: 10.8" Depth of Throat: 16" Backgauge: Motorized Axis: 6 Crowning: Motorized Controller: D
                                          • Tonnage: 192T
                                            2008 Leadwell MV-50 Vertical Machining Center Fanuc 18i-MB Control
                                            $22,500
                                            2008 Leadwell MV-50 Vertical Machining Center Fanuc 18i-MB Control
                                            2008 Leadwell MV-50 Vertical Machining Center Fanuc 18i-MB Control Specifications: Table Size (Maximum Weight Allowable) 23.9" x 55.8" (3,000 lbs. Cap) Travel - X Axis 49.9” Travel - Y Axis
                                            • X axis: 49.9"
                                            • Y axis: 24.9"
                                              2009 ACER Model VMC-1724 Vertical Machining Center Anilam 6000-M
                                              $7,500
                                              2009 ACER Model VMC-1724 Vertical Machining Center Anilam 6000-M
                                              2009 ACER Model VMC-1724 Vertical Machining Center Anilam 6000-M CNC Control (Conversational & G-Code) Specifications: Table Size 16" x 26" (1,100 lbs. Max) X Axis Travel
                                              • X axis: 24"
                                              • Y axis: 17"
                                                2000 Modig PROFILELINE MODEL MD 7200 - FANUC 160i CONTROL
                                                $45,000
                                                2000 Modig PROFILELINE MODEL MD 7200 - FANUC 160i CONTROL
                                                Specifications: Rotary Table Size: 15.74” Diameter x 7.87” Bore Spindle Nose to Table Top (Max / Min) 25.90” / 5.90” Distance Spindle to Center of Rotary (Min/Max) 0 – 14.96” Overhang Spindle to Column
                                                • X axis: 39.3"
                                                • Y axis: 15.87"
                                                  2015 Ganesh GT-3080 CNC Lathe (10″ Bore) Fanuc 0i-T-D (Manual Guide i)
                                                  $95,000
                                                  2015 Ganesh GT-3080 CNC Lathe (10″ Bore) Fanuc 0i-T-D (Manual Guide i)
                                                  Ganesh GT-3080 Series CNC Lathe (10″ Bar Capacity) With Fanuc 0i-T-D (Manual Guide i) Specifications Swing over Bed 30” (760 mm) Swing over Cross Slide 19” (480 mm) Ce
                                                  Rowe 4020-J 4000lb Uncoiler
                                                  $990
                                                  Rowe 4020-J 4000lb Uncoiler
                                                  Used Rowe uncoiler
                                                  • Maximum weight capacity: 4000Lb
                                                    AKYAPAK CNC Hydraulic Press Brake 330 ton x 12'
                                                    $145,000
                                                    AKYAPAK CNC Hydraulic Press Brake 330 ton x 12'
                                                    330 TON X 12’ PRESS BRAKE WITH ESA CNC CONTROL, CNC CROWNING, STANDARD TOOLING. GENERAL SPECIFICATIONS BENDING FORCE: 330 TONS BENDING LENGTH: 120” MAX STROKE: 11” BACKGAUGE SPEED: 591 IPM OIL TANK: 79 GALLONS
                                                    • Tonnage: 330T
                                                      2-# Sugino ES3PL Selfeeder Electric Drill
                                                      $RFQ
                                                      2-# Sugino ES3PL Selfeeder Electric Drill
                                                      Product Image - ES3P-LUDetailed Drawing 1/2 or 3/4 HP spindle motors 900-9000 fixed rpm spindle speed range Typical drilling capacity in mild steel is 11/32 in.(8.5 mm) Typical drilling capacity in cast iron 25/64 in
                                                      • # Spindles: #1
                                                      • X axis travel: 0"
                                                        Press Brake 500 Ton X 20' by Gator
                                                        $RFQ
                                                        Press Brake 500 Ton X 20' by Gator
                                                        Provetco Technology is introducing the 500-ton Press Brake from Gator– a powerhouse of precision engineering designed to handle your most demanding bending applications. With cutting-edge features and unparalleled durabi
                                                        • Tonnage: 500T
                                                          Press Brake 12' x 242 Ton 4-axis
                                                          $119,000
                                                          Press Brake 12' x 242 Ton 4-axis
                                                          Provetco Technology is proud to introduce the Gator press brakes! Unlock the full potential of your metal fabrication with this Press Brake, engineered for precision bending and unmatched performance. Designed to handle
                                                          • Tonnage: 242T
                                                            Amada|Laser CO2| LC3015F1NT IB|4000 watts
                                                            $RFQ
                                                            Amada|Laser CO2| LC3015F1NT IB|4000 watts
                                                            Origin: Japan Year: 2011 Capacity: 4000 Watts Cutting Capacities: Stainless Steel: .500"(12.7 mm)CleanCut Aluminum: .375"(9.525 mm) Carbon Steel: .875"(22.225 mm) Specifications Controller
                                                            • Wattage: 4000W
                                                              New!! Piranha P65 | 65 Tons | 5 Workstation |
                                                              $RFQ
                                                              New!! Piranha P65 | 65 Tons | 5 Workstation |
                                                              Type: Hydraulic Capacity: 65Tons Workstation: 5 1.- Punch: 1-1/16" x 3/4" 2.- Bar shear: Round 1-1/2", Square 1" 3.- Plate shear: 1" x 4", 3/4" x 10", 5/8" x 15" 4.
                                                              Gator Angle Rolls 3" x 3"
                                                              $35,000
                                                              Gator Angle Rolls 3" x 3"
                                                              The Gator GAR Series brought to you by Provetco Technology feature a durable steel frame, providing a strong and stable foundation. Built with top-quality hydraulic and electrical components, these machines are engineere
                                                              • Length: 61"
                                                              • Width: 47"
                                                                4-Rolls CNC Hydraulic Plate Rolls 8' x 3/8"
                                                                $99,000
                                                                4-Rolls CNC Hydraulic Plate Rolls 8' x 3/8"
                                                                As well as being reliable, AHS increases productivity with its high speed rolling ability and it overcomes the most challenging bending thanks to its ease of use. Since the plate is pinched during rolling, skidding and s
                                                                • Roll length: 96"
                                                                • Thickness: 0.375"
                                                                  OMi Crane (overhead)
                                                                  $140,000
                                                                  OMi Crane (overhead)
                                                                  GENERAL CRANE SPECIFICATIONS: SPAN----72' 3 1/2" CAPACITY-----60,000 LBS. (30 US TONS) CMAA CLASS "C" SERVICE/INCOORS BRIDGE SPEED----100 F.P.M. INFINITELY VARIABLE 2 @ 2.0 HP. VPD CONTROL TROLLE
                                                                  • Lifting capacity: 30T
                                                                  • Span: 24'
                                                                    Peck, Stow & Wilcox Shear with run off tables
                                                                    $3,999
                                                                    Peck, Stow & Wilcox Shear with run off tables
                                                                    This is a GREAT slitter with run off tables and shear! It can slit and run blanks for sheet metal manufacturing! ONLY ASKING FOR $3,999.00 If you are in the sheet metal industry, this would make a great addition!
                                                                    MD-5 Micro-Weld Flash/Butt Welder
                                                                    $48,000
                                                                    MD-5 Micro-Weld Flash/Butt Welder
                                                                    MD-5 Micro-Weld Flash/Butt Welder New Condition 2015 Capacity: 0.500"to 1.125" diameter solid steel rod 460 volts, 60 cycle, single phase a/c Solid state heat selection switch Motor driven cam upset mech
                                                                    • Power: 200KVA
                                                                      Hem Saw Inc Band Saw H3236A-DC
                                                                      $39,900
                                                                      Hem Saw Inc Band Saw H3236A-DC
                                                                      This band saw makes cutting quick and easy with just the standard features! Standard features include: Swing Away Console with Touch Screen Controls Computer Controlled System 24" Rolling Discharge Table Po
                                                                      48" FORTE SLITTER LINE
                                                                      $89,000
                                                                      48" FORTE SLITTER LINE
                                                                      FORTE 48" pull through slit line! Complete and in working condition! Uncoiler and recoiler, turn stile, .0123 though .102 20,000 lbs decoiler/ recoiler Included with hundreds of extra knives, spacers,
                                                                      SHEET METAL CUT-TO-LENGTH LINE
                                                                      $4,600
                                                                      SHEET METAL CUT-TO-LENGTH LINE
                                                                      SHEET METAL CUT-TO-LENGTH LINE This is a full cut to length line. It has in-feed rollers, cuts up to 16 gauge, and has a running roller stacked conveyor hooked to the output of the sheer. It makes bundles and bundles
                                                                      TRENNJAEGER PROMACUT 44" HYDRAULIC COLD SAW IN GREAT WORKING CONDITION
                                                                      $5,900
                                                                      TRENNJAEGER PROMACUT 44" HYDRAULIC COLD SAW IN GREAT WORKING CONDITION
                                                                      Promabeam Cold Saw SELLING FOR ONLY $5,900 The Promabeam Cold Saw will give you a nice clean cut on I Beam, Square Tubing, Rectangular Tubing and more! It can cut material in BUNDLES while maintaining solid clean cuts
                                                                      HEM SAW CYCLONE BAND SAW FOR SALE!
                                                                      $15,000
                                                                      HEM SAW CYCLONE BAND SAW FOR SALE!
                                                                      HEM SAW CYCLONE BAND SAW 18" x 24" ASKING FOR ONLY $15,000.00 Our Hem Saw Cyclone Band Saw is under power and is used daily to cut BUNDLES of square tubing, rectangular tubing, I Beam and more! It cuts l
                                                                      28' Long Chicago Dreis & Krump Brake Press
                                                                      $39,900
                                                                      28' Long Chicago Dreis & Krump Brake Press
                                                                      This 28' long Chicago Brake Press is a rare Mechanical Brake Press! This very rare machine doesn't come around often! You just can't find 28' long presses like this anymore. Currently under power at a ste
                                                                      • Tonnage: 300T
                                                                        4-Roll CNC Hydraulic Plate Roll Bender 10' x 2"
                                                                        $RFQ
                                                                        4-Roll CNC Hydraulic Plate Roll Bender 10' x 2"
                                                                        The machine frame is fabricated using high-strength welded steel (ST-52). Roll shafts, materials, and bearings used in production are of European quality, and the torque limit of the machines is very high. This plate rol
                                                                        • Roll length: 120"
                                                                        • Thickness: 2"
                                                                          Angle Rolls L4"x4"x3/8"
                                                                          $52,000
                                                                          Angle Rolls L4"x4"x3/8"
                                                                          The APK 101 Angle Roll Bender is 3-Rolls driven. This feature allows high capacity bending processes. This machine allows pipe bending if the dies (special rolls) are purchased separately. Equipment: Steel (St-52
                                                                          4-Roll Plate Rolling Machine 122" x 1/2" (3/8" pre-bend)
                                                                          $95,000
                                                                          4-Roll Plate Rolling Machine 122" x 1/2" (3/8" pre-bend)
                                                                          Gator CNC and NC-equipped 4-roll hydraulic plate bending machines are produced to the highest quality standards and have a 3-year warranty. Their robust construction ensures long-lasting performance, maintaining consiste
                                                                          • Roll length: 122"
                                                                          • Thickness: 0.5"
                                                                            4 Roll CNC Hydraulic Plate Rolls 10' x 1/2"
                                                                            $135,000
                                                                            4 Roll CNC Hydraulic Plate Rolls 10' x 1/2"
                                                                            As well as being reliable, AHS increases productivity with its high speed rolling ability and it overcomes the most challenging bending thanks to its ease of use. Since the plate is pinched during rolling, skidding and s
                                                                            • Roll length: 122"
                                                                            • Thickness: 0.5"
                                                                              4 Roll CNC Hydraulic Plate Rolls 8' x 5/8"
                                                                              $130,000
                                                                              4 Roll CNC Hydraulic Plate Rolls 8' x 5/8"
                                                                              As well as being reliable, AHS increases productivity with its high-speed rolling ability and overcomes the most challenging bending thanks to its ease of use. Since the plate is pinched during rolling, skidding and slip
                                                                              • Roll length: 96"
                                                                              • Thickness: 0.625"
                                                                                5" spindle Knuth BO-130 boring mill
                                                                                $225,000
                                                                                5" spindle Knuth BO-130 boring mill
                                                                                5"spindle Knuth boring mill (table type) 35.4" spindle feed 63" x 70.8" table size Table travel 78" longitudinal ,78" traverse 70.8 vertical head travel max table load 22,000 lbs
                                                                                • Spindle diameter: 5"
                                                                                  APK240 Hydraulic Angle Rolls 6" x 6" x 1"
                                                                                  $RFQ
                                                                                  APK240 Hydraulic Angle Rolls 6" x 6" x 1"
                                                                                  Available in Stock! See the attached document for technical specifications. Angle Leg- Out: 6" x 6" x 1" Angle Leg-In: 6" x 6" x 1" Flat Iron on Flat: 12" x 2-1/2" Flat on E
                                                                                  ADOP CNC PLATE DRILLING AND OXY-FUEL/PLASMA CUTTER
                                                                                  $RFQ
                                                                                  ADOP CNC PLATE DRILLING AND OXY-FUEL/PLASMA CUTTER
                                                                                  Best for heavy-duty drilling and cutting jobs in various metalworking industries. Available in stock! Distributed by Provetco Technology. Technical Specifications: Entire system control: CNC (Mitsubishi or Siemens)
                                                                                  4 Roll Plate Bending Machines - AKBEND
                                                                                  $RFQ
                                                                                  4 Roll Plate Bending Machines - AKBEND
                                                                                  We have plate bending machines ready to be shipped from Florida. Feel free to come by and see the machines at the showroom. 4 roll hydraulic plate bending machines with capacity in thickness from 14 ga. to 8” and in
                                                                                  AST-1200 MITER BAND SAW
                                                                                  $RFQ
                                                                                  AST-1200 MITER BAND SAW
                                                                                  The Miter Band Saw has been designed with a rigid frame and equipped with high quality components to guarantee the best sawing results. With the increased cutting speed, the Miter Band Saw can cut materials at 90°or
                                                                                  AFD Flange Drilling Machine
                                                                                  $RFQ
                                                                                  AFD Flange Drilling Machine
                                                                                  High speed and high processing performance with AFD up to 40"x60" (1000×1500 mm) materials. The state of the art AFD Flange Drilling Machine is designed for drilling, marking and tapping plates. All moveme
                                                                                  Beam Drilling Lines - ADM 1200 CNC
                                                                                  $RFQ
                                                                                  Beam Drilling Lines - ADM 1200 CNC
                                                                                  10 axis 3 spindle AKDRILL ADM Drilling Machines provide high-quality solutions in the manufacturing of steel, construction, infrastructure, shipyards, and in various other fields. ADM series have the drilling capacity of
                                                                                  CNC Angle Rolls 3″ x 3″ x 5/16″
                                                                                  $52,000
                                                                                  CNC Angle Rolls 3″ x 3″ x 5/16″
                                                                                  3″ x 3″ x 5/16″ capacity new angle bending machine. Thanks to the combination of large roll shaft diameters and oversized bearing assemblies, APK machines can produce more bending power and torque with less flexing of th
                                                                                  • Length: 41"
                                                                                  • Width: 54"
                                                                                    STARTRITE | Vertical | Capacity18" x 26"|
                                                                                    $4,000
                                                                                    STARTRITE | Vertical | Capacity18" x 26"|
                                                                                    Vertical Capacity18" x 26" Cut angle 90° 45° Left, 10° Right Band 14' 4" x 1" 3 HP 440v / 3 Phases Dimensions 33" x 76" x 81"
                                                                                    Press Machine| Stroke 10" |
                                                                                    $RFQ
                                                                                    Press Machine| Stroke 10" |
                                                                                    Press Machine Stroke 10" Bed 10" x 59" Dimensions 75" x 75" x 106" *without hydraulic unit
                                                                                    • Stroke: 10"
                                                                                      SAJO PF-52 | Horizontal | Spindle Cat 40 |
                                                                                      $RFQ
                                                                                      SAJO PF-52 | Horizontal | Spindle Cat 40 |
                                                                                      Horizontal 11" x 49" Table Spindle taper Cat 40 Speeds Manual feed x, y, z 220v / 3 Phases Weight 3240 lbs Dimensions 63"x58"x62"
                                                                                      Amada SP-30 | Hydraulic | 30 Tons |
                                                                                      $RFQ
                                                                                      Amada SP-30 | Hydraulic | 30 Tons |
                                                                                      Hydraulic Capacity: 30 Tons Bed 40" x 15"
                                                                                      Whitney 635-A | Hydraulic | 30 Tons |
                                                                                      $RFQ
                                                                                      Whitney 635-A | Hydraulic | 30 Tons |
                                                                                      Hydraulic 30 Tons Bed: 96" x 57" 10 HP 440v / 3 Phases Dimensions: 86" x 150" x 74"
                                                                                      Sterlitamak 800VT Vertical Milling-Turning Machining Center
                                                                                      $RFQ
                                                                                      Sterlitamak 800VT Vertical Milling-Turning Machining Center
                                                                                      Complete machining of complex flat and/or bulky workpieces in small lot and batch production: Flanges, Gears, Bearings, Pulleys, Rings, Various housings and other bulky workpieces. As A Vertical Machining Center: drilli
                                                                                      • X axis: 24.8"
                                                                                        CONTINUOUS CASTING FURNACE IECO - DUAL CASTING - 12 HOURS ONLY!!!!!
                                                                                        $20,000
                                                                                        CONTINUOUS CASTING FURNACE IECO - DUAL CASTING - 12 HOURS ONLY!!!!!
                                                                                        Vertical Continuous Casting Furnance, Brand: IECO With Two Independent Casting Furnance Stations. ONLY 12 metered hours of work. Like new! This Furnance was bought and tested but never used for production. It
                                                                                        3115 kN PRESS INDUSTRIAL PRESS SMG PRESSEN
                                                                                        $390,000
                                                                                        3115 kN PRESS INDUSTRIAL PRESS SMG PRESSEN
                                                                                        INDUSTRIAL PRESS Brand: SMG Model: HZPU-T 315-2400/1000 Fabr. Nr. 7.4067 Year: 1985 Force: 3115 kN Speed train speed 400 mm/s
                                                                                        CYLINDRICAL GRINDER - MATRIX - CYLINDRICAL GRINDING MACHINE
                                                                                        $8,900
                                                                                        CYLINDRICAL GRINDER - MATRIX - CYLINDRICAL GRINDING MACHINE
                                                                                        CYLINDRICAL GRINDING MACHINE Brand: MATRIX Maximum diameter admitted: 7 in. 175mm Maximum length between centres: 9.5 in. 240mm Maximum recommended form diameter: 4 in. 100mm Maximum depth of form: 0.250 in 6.
                                                                                        Presicion Centerless Grinder Griding Machine for HIGH PRODUCTION NOMOCO 40
                                                                                        $28,000
                                                                                        Presicion Centerless Grinder Griding Machine for HIGH PRODUCTION NOMOCO 40
                                                                                        Presicion Centerless Grinding High production NOMOCO 40 - Maxinum external diameter 40mm - Clean - Automatic dresser Whell for boot whells - Main Whell 14”X4” - Rotating Whell 14”X4” - Programable timer Au
                                                                                        2005 VERMEER T455
                                                                                        $65,000
                                                                                        2005 VERMEER T455
                                                                                        S/N: 1VRK120B2Y1000302, 1011 HOURS, 125 HP, BOOM LENGTHENED, WILL CUT BOOM TO ANY LENGTH AT NO COST, REGULAR MAINTENANCE, EXTRA TEETH INCLUDED RUNS GREAT!
                                                                                        Birmingham 6 foot 12 gauge Sheetmetal Brake
                                                                                        $4,700
                                                                                        Birmingham 6 foot 12 gauge Sheetmetal Brake
                                                                                        Almost new Birmingham 12 gauge sheetmetal brake. Bought new from Southern Tool for $5,800 and used on two small jobs. It needs a new home where it will be used. It's a great tool!
                                                                                        Caterpillar D40-4
                                                                                        $13,000
                                                                                        Caterpillar D40-4
                                                                                        Cat D40-4 generator, pulled from a hospital that closed down. Has 41 hrs on it. Only ran when power was off to hospital and to check operation. Comes with control box from inside at nurse's station. Generator KW:
                                                                                        • Power: 40kW
                                                                                          10 A Used Jones & Lamson Saddle TypeTurret Lathe
                                                                                          $RFQ
                                                                                          10 A Used Jones & Lamson Saddle TypeTurret Lathe
                                                                                          Swing Over Bed Ways 32" Swing Over Cross Slide Carriage 22" Center Distance 70" Spindle Hole 6-1/2" Spindle Speeds 12 To 600 Rpm's Spindle Nose A-11 Chuck Size 18" 3- Jaw With 2 Piece J
                                                                                          5 A Used Warner & Swasey Square Head Saddle TypeTurret Lathe
                                                                                          $RFQ
                                                                                          5 A Used Warner & Swasey Square Head Saddle TypeTurret Lathe
                                                                                          Swing Over Bed Ways 36" Center Distance 108" Swing Over Cross Slide Carriage 32-3/4" Spindle Hole 12-1/2" Spindle Speeds 10 To 281 Rpm's Spindle Nose A-20 Chuck Size 32" 4 Jaw Feeds Cr
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          Swing Over Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 12-1/2 Center Distance 62" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (New Heavy Duty) 24" 4 Jaw New
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 12-1/2 Center Distance 62" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (New Heavy Duty) 24" 4 Jaw
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 12-1/2" Center Distance 144" Spindle Speeds 10 To 526 Rpm's Spindle Nose A-20 Chuck Size With 12-1/2" Thru H
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 62" Spindle Hole 9-1/4" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (New Heavy Duty) 24"
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 62" Spindle Hole 9-1/4" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (New Heavy Duty) 24"
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 9-1/4" Center Distance 62" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (New Heavy Duty) 24"
                                                                                          4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe
                                                                                          Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 62" Spindle Hole 12-1/4" Spindle Speeds 10 To 210 Rpm's Spindle Nose A-20 Chuck Size 28" 3-Jaw Feeds Cro
                                                                                          3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 6-1/4" Spindle Speeds 12 To 851Rpm's Spindle Nose A-15 Chuck Size New Gator 21" 4- Jaw
                                                                                          3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 6-1/4" Spindle Speeds 24 To 851 Rpm's Spindle Nose A-15 Chuck Size No Feeds Cross .0025 To .
                                                                                          3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 4-3/4" Spindle Speeds 12 To 851 Rpm's Spindle Nose A-11 Chuck Size (Not Pictured) 21" 4
                                                                                          3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          $RFQ
                                                                                          3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
                                                                                          Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 6-1/4" Spindle Speeds 24 To 851Rpm's Spindle Nose A-15 Chuck Size 21" 3-Jaw Feeds Cross
                                                                                          Categories:
                                                                                          Condition:
                                                                                          Manufacturer:
                                                                                          Location:
                                                                                          Price:
                                                                                          •  to 
                                                                                          <Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>